Search results for: 'ten'

H-1116 SCHLAFHORST AUTOCONERS 338 YEAR 2002-2003-MAGAZINE

TYPE: MAGAZINE FEED
YEAR 2002-03
400V/50HZ
60 SPINDLES
6 HOLE MAGAZINE FEEDING WITH STEEL DRUM OF 2.5 TURN
WITH USTER QUANTUM (C15-F23) YARN CLEARER
COLOR INFORMATOR
SPLICE PRISM DZ3/16.1E
CONE ANGEL 5°57
TRAVERSE 6"
SUCTION TAIL END
AUTO TENSOR
1 RIGHT HAND 1 LEFT HAND M/CS
WITH OVERHEAD CLEANER
WITH WAXING DEVICE

QUANTITY: 2

Learn More

P-4762 TOYOTA FL-100 ROVING FRAMES YEAR 1997 120 SPINDLES

TOYOTA
TYPE: FL-100
ROVING FRAMES
YEAR: 1997 (1501 – 1503)
NUMBER OF SPINDLE: 120
STAFF: 440mm
ARM: PK1500
DRAFT: 4 LINES
BOTTOM ROLLER: 28.8/28.8/28.8mm
CLOSE TYPE FLYER
FULL BOBBIN SIZE: 6 INCHES x 16 INCHES
WITH ROVING TENSION CONTROLLER
WITH INVERTER
WITH OHTC: PNEUMABLO BS
POWER: 380V/50H

QUANTITY: 3 SETS

Learn More

P-4706 TOYODA FL-100 ROVING FRAMES YEAR 1997 96 and 120 SPINDLES

TOYODA
MODEL: FL-100
ROVING FRAMES
YEAR: 1997
2 SETS WIITH 96 SPINDLES
2 SETS WITH 120 SPINDLES
STAFF (4 SPINDLES); 440mm
FULL BOBBIN DIAMETER: 152mm
LIFT: 406mm
EASY DOFFING DEVICE
DRAFTING SYSTEM: 4-ROLLER DOUBLE APRON D-TYPE
FOR 100% COTTON, COMBED OR CARDED
PROCESSING FIBRE UP TO 38mm, Ne 10-20s
WEIGHTING ARM: SKF-PK1500-001938
SHORT BOTTOM APRON
CRADLE TYPE: SKF OH 514-110
CCRADLE RADIUS: 34.5mm, WIDTH: 40mm
BOTTOM ROLLER = 28.5 (F) x 28.5 (S) x 28.5 (T) x 28.5 (B)
TOP ROLLER SKF
LP 315-110 (F) x LP 315-110 (S) x LP 317-110 (T) x LP 315-110 (B)
DIAMETER OF FLYER SPINDLE, 22mm
LIGHT ALLOW METAL FLYER, SL REINFORCED, SLIT LESS TYPE (FL 100)
SIZE OF FEEDING CAN: 508mm (20 INCHES) x 1321mm (52INCHES) SIZE
SINGLE SILVER FEEDING TYPE
INDICATOR: 3 SHIFTS
CLEARER: POSITIVE INTERMITTENT ROVING CLEARER WITH COMB FOR TOP AND BOTTOM ROLLERS
ELECTRIC CUSHION STARTER CONTROL FOR RUN AND INCHING
AUTOMATIC LUBRICATION FOR FLYER AND BOBBIN GEAR
MACHINE BACK COVER WITH BOBBIN JUMP PREVENTION DEVICE
VOLTAGE: AC 220/60Hz

SPECIAL OPTIONS INCLUDED ARE:
ROVING TENSION CONTROLLER
FLYER SPEED CONTROL BY INVERTOR
MAIN GEARING IN OIL BATH
DRAFT GEARING GREASE
IRREGULAR ROVING [REVENTING DEVICE
PACKAGE SHOULDER COLLAPSE PREVENTING DEVICE
STOP MOTION UPON LENGTH MEASURED SETTING COMPLETION

QUANTITY: 4 SETS

Learn More

C-2125 ELECTROJET ROVINGFRAME WITH 144 SPINDLES, YEAR 2004

NUMBER OF SPINDLES: 144
STAFF LENGTH: 520mm
FLYER SIZE/TYPE: 16" X 6"
DRAFTING: SKF PK1500
3/3 OR 4/4: 4/4
CRADLE SIZE: SHORT
BOTTOM ROLLER DIAMETER: 30-25-30-30mm
ROVING TENSION CONTRO: AVAILABLE
BOTTOM POSITIVE CLEARER: AVAILABLE
BOBBIN LENGTH: 450mm
FEED CAN SIZE: 24 X 46"
NO. OF CREEL ROLL: 4
MOTOR KW: 43
AUTO DOFFING: AVAILABLE
INVERTER: AVAILABLE
OHTC: ELECTROJET

QUANTITY: 2

Learn More

C-1426 COMPLETE RIETER G33 RING SPINNING PLANT 29,000 SPINDLES, YEAR 1996

RING FRAMES,
FLYERS AND DRAW FRAMES
INSTALLED YEAR 2000
BLOWROOM AND CARDS INSTALLED YEAR 1996

-RIETER BLOWROOM

RIETER UNIFLOC A10, 2300MM, 36.8M
ARGEMA ELECTRONIC METAL DETECTOR
RIETER WASTE OPENER B2/5
RIETER UNICLEAN B10
2 RIETER UNIMIX B7/3
4 RIETER UNIFLEX B7/3

PNEUMATIC FIBRE CONVEYANCE, EXHAUST FANS,
DUST EXTRACTOR FANS,
TRANSPORT FANS, 2 TWO-WAY DISTRIBUTORS,
4 HIGH SPEED BY-PASS VALVES
ELECTRICAL CONTROL PANEL

-RIETER CARDS

12 RIETER C50 CARDS WITH CHUTE FEED AEROFEED A7/U
AUTOMATIC WASTE REMOVAL SYSTEM,
TRANSPORT FANS, BY-PASS VALVES.
RINSING VALVES AND LOCKING VALVES

-RIETER DRAW FRAMES

4 RIETER DRAW FRAMES TYPE SB-D10, 20” X 42” CANS
4 RIETER DRAW FRAMES TYPE RSB-D30, 20” X 42” CANS

-RIETER ROVING FRAMES

8 RIETER ROVING FRAMES , TYPE F10, 120 SPINDLES
LUWA TRAVELLING CLEANERS

-RIETER RING FRAMES

30 RIETER G33 RING FRAMES, 960 SPINDLES
10 FRAMES RINGS 42MM DIA, 70MM GAUGE, LIFT 220MM

20 FRAMES RINGS 45MM DIA, 70MM GAUGE, LIFT 230MM
LUWA TRAVELLING CLEANERS

-CONE WINDING

8 MURATA CONE WINDERS, 60 HEADS EACH
(4 X TYPE 7-2 FROM 1985 AND 4 X 7-V FROM 1996)

-LABORATORY

USTER TESTER 4
USTER TENSORAPID UTR-3

-ACCESSORIES

OTIMA VACUUM STEAMER
COMPRESSORS,

PLANT IS RUNNING NOW
INSPECTION WELCOME ANY TIME

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-5492 (330BPBRXX2) L SCHWEITER KEK-PN CONE-TO-CONE PRECISION WINDERS FOR POLYAMIDE & POLYESTER YARNS- 40 positions for cones and for dye bobbins PRECISION WINDERS SCHWEITER, TYPE KEK-PN FROM CONE TO CONE WINDING AND REWINDING MACHINES FOR POLYAMID AND POLYESTER FILAMENT YARNS ONE SIDED MACHINE WITH 40 WINDING HEADS TRAVERSE 8” = 200mm CONICITY 3°30 MACHINES SUITABLE FOR 140 TO 210 DENIER TEXTURED DYED OR UNDYED POLYAMIDE AND POLYESTER YARN – ALSO SUITABLE FOR WINDING SOFT DYEING PACKAGES ADJUSTABLE CERAMIC TENSION DEVICES OILING SYSTEM EACH SET OF 2 MACHINES FITS IN 1 x 40’ CONTAINER QUANTITY AVAILABLE: 12 Learn More

REFERENCE NUMBER: C-2506 MURATA MACHCONER WINDER MACHINE TYPE 7-5 WITH 60 SPINDLES SPECIFICATIONS: MURATA MACHCONER WINDER MACHINE TYPE 7-5 YEAR: 2000 NOS OF SPINDLES: 60 QUANTITY AVAILABLE: 5 Learn More

REFERENCE NUMBER: M-1246 COMPLETE RING SPINNING PLANT OF 17136 SPINDLES COMPLETE RING SPINNING PLANT OF 17136 SPINDLES CONSISTING OF BLOWROOM CARDING WASTE COLLECTION DEPARTMENT DRAW FRAME ROVING (SPEED FRAME) RING FRAME AUTO CORO WINDING YARN CONDITIONING MACHINES HUMIDIFICATION PLANT TESTING LAB ROVING OPENER (FOR SPEED FRAME BOBBINS) MACHINE SHOP WEIGH SCALES UTILITIES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5263 (1313ANWDHH12) L USTER YARN TESTING EQUIPMENT YEAR 1991-1999 (1) X USTER YARN EVENNESS TESTER (1) X USTER FIBER LENGTH, NEPS, TRASH TESTING MACHINE (1) X USTER SINGLE YARN STRENGTH TESTER (1) X USTER YARN FAULT CLASSING MACHINE (1) X USTER FIBER LENGTH, GRADE CLASSING RAW COTTON TESTER TOTAL QUANTITY: 5 Learn More

REFERENCE NUMBER: A-1195 (1212GHBXX11) A USTER TESTER 3 YEAR 1997 YEAR 1997 HAIRNESS MODULE TYPE H UT3 EC1 EVERNESS CONVERTER UT3 C 4 SENSOR TYOE B UT3 EC5 TENSIONER TYPE D UT3 EC3 CONVEYOR UT3 EC 2 ABSORBER TYPE B PRINTER USTER EXPERT EXCELLENT CONDITION QUANTITY: 1 EMAIL US FOR PRICE & PICTURES INCLUDE OUR REFERENCE NUMBER Learn More