Search results for: 'line''

R-1732 MURATA VORTEX AIR JET SPINNING MACHINE WITH 80 SPINDLES, YEAR 2007

MURATA VORTEX AIR JET SPINNING MACHINE
YEAR: 2007
MODEL: MVS. 861
80 SPINDLES PER MACHINE
6 INCH TUBE TAKE UP
3 MURATEC SPLICERS PER FRAME
1 MURATEC AUTOMATIC DOFFERS
WITH FRONT YARN CONVEYORS
MURATEC “VOS II” YARN MANAGEMENT SYSTEM WAXING DEVICES SPINDLE INSTALLED: 1.3
(SPARE DIAMETER 1,1 & 1,2)
NEEDLE HOLDER: 2PZ8.8L8
NOZZLE: 4-HOLES ECO (Z)1
4 LINE SLIVER CREELS FOR 20 INCH DIAMETER CANS

QUANTITY: 3

Learn More

P-4762 TOYOTA FL-100 ROVING FRAMES YEAR 1997 120 SPINDLES

TOYOTA
TYPE: FL-100
ROVING FRAMES
YEAR: 1997 (1501 – 1503)
NUMBER OF SPINDLE: 120
STAFF: 440mm
ARM: PK1500
DRAFT: 4 LINES
BOTTOM ROLLER: 28.8/28.8/28.8mm
CLOSE TYPE FLYER
FULL BOBBIN SIZE: 6 INCHES x 16 INCHES
WITH ROVING TENSION CONTROLLER
WITH INVERTER
WITH OHTC: PNEUMABLO BS
POWER: 380V/50H

QUANTITY: 3 SETS

Learn More

M-5228 RIETER G33 COMPLETE PLANT YEAR 2003 WITH 24,000 SPINDLES

BLOWROOM LINE
(1) X A 11 RIETER BALE OPENER YEAR: 2003
(1) X B 10 RIETER FINE OPENER YEAR: 2003
(1) X METAL DETECTOR ARGEMA YEAR: 2003
(1) X FOREIGN FIBER DETECTOR JOSSI YEAR: 2003
(2) X B 60 RIETER CLEANER YEAR: 2003
(2) X A 70 RIETER MULTIMIXER YEAR: 2003

CARDING
(18) X RIETER C51 YEAR: 2003
WITH IGS SYSTEM, A70 CHUTE FEED
40X42” CAN, AUTOMATIC CAN CHANGER

PASSAGE DRAWFRAME
(4) X RIETER SB 15 YEAR: 2003
POWER CREEL
24X42” DELIVERY

LAP FORMER
(1) X E-32 YEAR: 2008
(1) X E-30 YEAR: 2002

COMBER
(5) X E-62 YEAR: 2002
(6) X E-65 YEAR: 2008

PASSAGE DRAWFRAME
(5) X RIETER RSB D35 YEAR: 2003

FLYER
(6) X RIETER F-11 YEAR: 2003
120 SPINDLES, WITH BLOWER, SEMI AUTOMATIC

RING
(20) X RIETER G-33 YEAR: 2003
1200 SPINDLE, P3-1 DRAFTING, 70mm GAUGE
40mm DIAMETER, 21CM TUBE, WITH INVERTER, AUTOMATIC DOFFING

WINDER
(8) X MURATA 21C YEAR: 2003
LOEPFE 940F CLEARER
G2Z SPLICER
CONICAL 5*57
STEEL DRUM
60 SPINDLES
WITH BLOWER

SPLIT SALE IS POSSIBLE
LABORATORY – NOT AVAILABLE
HEATSEATER – NOT AVALIABLE
SPARE PARTS – AVAILABLE
HUMIDIFICATION – NOT AVAILABLE

QUANTITY: 1

Learn More

C-4127 RIETER RING SPINNING MILL WITH 24000 SPINDLES, YEAR 2003 TO 2008

RIETER RING SPINNING MILL
24000 SPINDLES
YEAR: 2003 TO 2008

CONSISTING OF:
OPENING LINE:
OFFER 001
UNIFLOC A11
WASTE OPENER
UNICLEAN
UNIMIX
UNIFLEX
JOSSI VISION SHIELD 2
QUANTITY: 1

OFFER 002
CARDS:
C51
CHUTE FEED A70
IDF (INTEGRATED GRINDING SYSTEM)
CAN SIZE: 1000mm
QUANTITY: 18

OFFER 003
DRAW FRAME:
4 X RSB SB-D15
CAN SIZE 600mm
5 X RSB D35
CAN SIZE 500mm
QUANTITY: 9

OFFER 004
LAP WINDER:
E32
QUANTITY: 2

OFFER 005
COMBER:
5 X E62
6 X E65
QUANTITY: 11

OFFER 006
ROVING:
6 X F11
120 SPINDLES
6 X 16"
QUANTITY: 12

OFFER 007
RING FRAME:
G33
1200 SPINDLES
38mm RING DIA. (10)
40mm RING DIA. (10)
GAUGE: 70mm
QUANTITY: 20

OFFER 008
WINDER:
MURATA 21C
60 POSITIONS
57
YARN CLEARER LÖPFE TK940F
WAXING
QUANTITY: 8

QUANTITY: 1 MILL

Learn More

H-1261 GOOSE FEATHER CLEANING MACHINE

LIST OF COMPONENTS FOR THE GOOSE FEATHER CLEANING MACHINE:

1) RINSING MACHINE OF THE TYPE 2000 (STAINLESS STEEL USED FOR IT)
EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM
QUANTITY: 1

2) GOOSE FEATHER ADDING MACHINE
EXTERIOR DIMENSION: 4000×1800×3300MM
QUANTITY: 1

3) WATER TANK
EXTERIOR DIMENSION: Ф1930MM×2440MM
QUANTITY: 1

4) DEWATERING MACHINE FLAT PLATE TYPE (BEING EQUIPPED WITH VARIABLE FREQUENCY CONTROL) - 2 SETS
QUANTITY: 2

5)DRYER OF THE TYPE 2000 (BEING EQUIPPED WITH ELECTRONIC WEIGHING)
EXTERIOR DIMENSION: 4500×2100×2900MM
QUANTITY: 1

6)GOOSE FEATHER ADDING MACHINE FOR DRYER(STAINLESS STEEL USED FOR IT AND ELECTRONIC WEIGHING INCLUDED)
EXTERIOR DIMENSION: 1500×1200×3600MM
QUANTITY: 1

7)THE COOLER OF THE TYPE 4700(STEEL & WOOD STRUCTURE, OPTIMIZED MOISTURE PROOF PANEL)
EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM
QUANTITY: 1

8) SORTING EQUIPMENT
QUANTITY: 2

9) POWER DISTRIBUTION CABINET
QUANTITY: 2

RINSING MACHINE: TYPE 2000

1. EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM DIAMETER

2.THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL IS USED FOR THE WALL FOR WASHING MACHINE AND 5MM IN THICKNESS FOR BARREL

3. THE MATERIAL OF AISI 1045 IS USED FOR THE SPINDLE OF THE SQUARE SHAPE(SPECIFICATION =108MMX108MM). WRAPPED WITH 2MM STAINLESS STEEL IN THE OUTER.
10MM IN THICKNESS STAINLESS STEEL IS FOR HOOP OF VANE.
4MM IN THICKNESS STAINLESS STEEL WHICH IS FOLDED IS FOR VANE.
HOOP SCREW OF M14 X 70 (HIGH STRENGTH GRADE) ARE USED.
THE BEARING HOUSING &BEARING OF UKP318 IS USED FOR THE SPINDLE.

4.THE SIEVE OF 1.5MM IN THICKNESS STAINLESS STEEL IS USED FOR WACHING MACHINE.THE HOLE IS 1.8MM IN DIAMETER. HOLE SPACING 3.8MM .THE STAINLESS STEEL OF 2MM IS USED FOR THE OBLIQUE OF OUTPUTTING THE GOOSE FEATHER.THE OUTLET NEAR DEWATERING MACHINE FOR GOOSE FEATHER CAN BE TURNED UPWARD. FOR GOOSE FEATHER.

5.THE PIPE FOR WATER INLET IS 114MM IN DIAMETER

6.THE POWER OF FAN: 7.5KW AND SPEED: 2900R/M

7.THE PIPE FOR FEEDING GOOSE FEATHER IS 250MM IN DIAMETER.

8.THE REDUCER FOR THE SPINDLE: JZQ-400. THE POWER OF MOTOR IS 15KW AND OUTPUT SPEED IS 42 R/M

9.EXTERIOR DIMENSION OF THE BOTTOM FOR WASHING MACHINE: WIDTH=1600MM;LENGTH=3500MM.ONE SIEVE OF 1MM IN THICKNESS FOR IT.

WATER TANK

1. THE DIMENSION OF TANK: Ф1930MM×2440MM

2.THE STAINLESS STEELOF 2MM IN THICKNESS FOR ITS BARREL AND 3MM FOR THE BOTTOM.THE COVER IS CONSTUCTED WITH ANGLE IRON OF STAINLESS STEEL AND INNER COVER 2MM STAINLESS STEEL PLATE.

DEWATERING MACHINE OF TYPE 1600

1. ONE SETS OF RINSING MACHING OF THE TYPE 2000 IS EQUIPPED WITH TWO SETS DEWATERING MACHINE OF THE TYPE 1600

2.THE POWER OF MOTOR=11KW-17KW.DOUBLE SPEED MOTOR WITH VARIABLE FREQUENCY CONTROL.

DRYER OF TYPE 2000

1. EXTERIOR DIMENSION: 4500×2100×2900×Ф1800MM（DIAMETER）

2. THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL(Q345R) IS USED FOR THE WALL FOR WASHING MACHINE. 10MM STAINLESS STEEL(Q345R) IS USED FOR INNER COVER OF THE BARREL AND 10MM STAINLESS STEEL (Q345R) PLATE FOR OUTER COVER OF THE BARREL.

3. THE INNER WALL OF WIND PLATE IS 0.5MM IN THICKNESS AND THE HOLE 1.5MM IN DIAMETER STAINLESS STEEL. 3MM COLD ROLLED PLATE IS USED FOR THE OUTER GATE.

4. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 10MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M12X70

6. THERE ARE FOUR INLET OF 1.5INCH IN DIAMETER FOR STEAM.
RELIEF VALVE FROM 3 KILO TO 7 (1 SETS)
THE PRESSURE GAGE (0-16 KILO) (2 SETS)
THE THERMOMETER (0-150 DEGREE) (1 SETS)
THERE ARE THREE DRAIN HOLE OF 1.5 INCH IN DIAMETER AT THE BOTTOM

6. THERE ARE TWO LAYERS FOR GOOSE FEATHER ADDING FOR DRYER: 1.5×1.2×3.6M.THEY ARE MADE WITH STAINLESS STEEL.THE SPECIFICATION OF CHARGING SPOUT ON THE TOP OF DRYER IS 1.55 X 0.55M.

7. THE OUTLET FOR GOOSE FEATHER OF DRYER CAN BE TURNED UPWARD.THE PIPE FOR OUTPUTTING GOOSE FEATHER IS 300MM IN DIAMETER.

8. TWO FANS ARE EQUIPPED FOR PRECISE WASHING LINE.THE POWER OF FAN FOR ADDING GOOSE FEATHER IS 7.5KW,SPEED: 2900R/M.WHICH IS USED TOGETHER WITH GOOSE ADDING MACHINE OF WASHING MACHINE.THE POWER OF FAN FOR DRYER IS 5.5KW,SPEED IS 2900 R/M.

9. MAIN SHAFT SPEED REDUCER FOR BELT BRIDGE MOTOR 7.5KW.OUTPUT SPEED IS 52 R/M
THE COOLER IS OF TYPE 4700

1. EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM DIAMETER

2. THE EXTERIOR IS CONSTRUCTED WITH THE WHOLE WOOD STRUCTURE.THE MATERIAL OF STEEL WITH 4# ANGLE STEEL AND 30X30 SQUARE TUBE IS FOR THE INNER SKELETON.

3. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 14MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M16X70

4. THE DIAMETER OF WIND PIPE: MAIN PIPE IS 300MM IN DIAMETER AND BRANCH IS 250MM IN DIAMETER.THERE ARE FOUR AIR OUTLET OF 300MM IN DIAMETER EQUIPPED EQUALLY SPACE.

5. ONE SIEVE IS EQUIPPED FOR THE COOLER.THE SIEVE IS MADE WITH 0.6MM IN THICKNESS GALVANIZED STEEL SHEET.THE HEIGHT OF HOLE IS 1.1MM.THE SCREEN FRAME IS MADE WITH 3# ANGLE STEEL.

6.THERE ARE TWO SORTING BOX WHICH IS CONSTRUCTED WITH STEEL FRAME AND WOODEN STRUCTURE. SIEVE 14 MESH GALVANIZED MESH BOLD

7. ONE FAN IS FOR THE COOLER.THE POWER OF THE FAN IS 11KW AND OUTPUT SPEED IS 2900 R/M

8. THE MOTOR FOR THE MAIN SPINDLE IS 15KW (6 POLE).THE SPEED OF 140 R/M IS FOR THE COOLER.

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-2072

CONE PACKING MACHINE -BRAND ZANCANER MODEL ROCBOX

 

PACKING MACHINE

MACHINE FOR CONES PACKING ZANCANER MODEL ROCBOX

 

PROCEDURE:

NYLON IS PLACED AROUND THE CONE WHICH CLOSES PACKAGES WITH NYLON INSIDE THE CONE

AUTOMATICALLY POSITIONS THE CONES IN BOXES AND THE SEPARATOR BETWEEN LINES - YEAR 1989.

 

AUTOMATIC CLOSING OF THE BOXES, ELECTRONIC WEIGHING, WITH COMPUTER TO PRINT

LABEL AND MANUALLY IS GLUED TO THE BOX -YEAR 2010.

 

UPDATE COMPLETE ON THE MACHINE MADE IN 2010

 

QUANTITY: 1 

Learn More

REFERENCE NUMBER: P-2774
HOWA UA-33F RING SPINNING FRAME YEAR 1989 720 SPINDLES (LINK CONER WITH MURATA NO.7-II)
8 SETS HOWA
MODEL: UA-33F
(LINK CONER WITH MURATA NO. 7-II)
YEAR: 1989
8 SETS MURATA
TYPE: NO. 7-II (LINK CONER)
AUTO WINDER
YEAR: 1989
QUANTITY: 8 SETS

Learn More

REFERENCE NUMBER: M-2025 (7702RDCBJM6UF) COMPLETE RING SPINNING PLANT OF 20,448 SPINDLES - YEAR 1995 COMPLETE RING SPINNING PLANT OF 20448 SPINDLES ALL MACHINES ARE OF YEAR 1995 AND ARE IN RUNNING IN EXCELLENT CONDITION BLOW ROOM: COMPLETE TRUTZSCHLER BLOW ROOM LINE CONSISTING OF AXI FLOW CLEANER AFC : 1 BALE OPENER BOA : 1 BLENDOMAT BDT 019 (2300) CLEANOMAT CVT 3 : 1 CONDENSER LVSA : 2 FAN TV 425: 2 MULTI MIXER mm10 : 1 SECUROMAT SC : 1 SEPAROMAT ASTA: 1 CARDING: 11 TRUTZSCHLER CARDING MACHINES MODEL DK 760 DRAWFRAME: 3 CHERRY HARA DRAW FRAME MODEL : D600 4 CHERRY HARA DRAW FRAME MODEL: D 600 USC COMBERS: 2 CHERRY HARA HI LAP MODEL : HL 100 11 CHERRY HARA COMBERS MODEL : VC 300 A ROVING: 6 ZINSER ROVING FRAMES MODEL : 660 NO. OF SPINDLES: 120 RING FRAME: 18 ZINSER RING FRAMES MODEL: 321E FU NO. OF SPINDLES : 1136 RING DIA: 38mm GAUGE : 70 mm DRAFTING SYSTEM: SPRING LOADED SKF 235 SPINDLE WHARVES DIA: 19.5 WITH OHTC : YES WINDING: 9 MURATA 7 V WINDING MACHINE NO. OF SPINDLES: 60, WITH USTER / LOEPFE ELECTRONIC YARN CLEARERS WITH AUTOMATIC FEEDING TWISTING: 24 VOLKMAN TFO MACHINES MODEL : VTS 09 O S NO. OF SPINDLES: 192 POT DIA: 150 GAUGE : 250mm 8 HAMEL ASSEMBLY WINDER QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1246 COMPLETE RING SPINNING PLANT OF 17136 SPINDLES COMPLETE RING SPINNING PLANT OF 17136 SPINDLES CONSISTING OF BLOWROOM CARDING WASTE COLLECTION DEPARTMENT DRAW FRAME ROVING (SPEED FRAME) RING FRAME AUTO CORO WINDING YARN CONDITIONING MACHINES HUMIDIFICATION PLANT TESTING LAB ROVING OPENER (FOR SPEED FRAME BOBBINS) MACHINE SHOP WEIGH SCALES UTILITIES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-2023 OPEN END SPINNING PLANT FOR SALE: INCLUDING TWISTING DEPARTMENT FOR THE PRODUCTION OF COARSE COTTON YARNS (TWISTED) BLOWROOM FOR COTTON, TRUTZSCHLER, YEAR 2004 CARDING TRUTZSCHLER 2004 DRAWING TRUTZSCHLER 2004 SPINNING SCHLAFHORST TWISTING STEAMING XORELLA 2004 AIR CONDITIONING MARTEL 2004 QUANTITY AVAILABLE: 1 Learn More