Search results for: 'can c'

REFERENCE NUMBER: K-8816 (99035MNH8UX) RIETER RSB D35 DRAWFRAME YEAR 2002 TYPE: AUTO LEVLER YEAR: 2002 EL: 3P/400V/50HZ MODEL: RSB D35 AUTOCAN CAN CHANGER AUTO LEVELLER CAN SIZE: 20” X 42”' RUNNING CONDITION QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K- 0713 RIETER COTTON COMBING PLANT 2002 1 X RIETER UNILAP MODEL: E32 5 X RIETER HIGH SPEED COMBING MACHINES MODEL: E62 YEAR: 2002 8 X COMBING HEADS/POSITIONS PER MACHINE COILER (CAN) SIZE: 24" X 48" AUTOMATIC CAN CHANGER INDIVIDUAL SUCTION WITH 6 TROLLIES FOR SPOOLS INCLUDING LAP TRANSPORT TROLLEYS AND SPOOLS EXCELLENT CONDITION STILL ERECTED ON MILLS FLOOR AND CONNECTED TO POWER TEST RUN WITHOUT MATERIAL IS POSSIBLE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-1181 RIETER DRAWING FRAMES MODEL SB-D 11, YEAR 2010, WITH CENTRAL SUCTION SPECIFICATIONS: RIETER DRAWING FRAMES MODEL SB-D 11 YEAR 2010 WHITOUT AUTOLEVELLER POWER CREEL FOR 8 CANS DIAM. 1000 X 1.250 MM EXIT WHIT AUTOMATIC CAN CHANGER FOR CAN DIAM. 1000 MM X 1.200 MM CENTRAL SUCTION 400 V 50 HZ QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5159 (1212FPEWXX11) L CROSROL MK-V CARDS YEAR 1993 CROSROL MK-V CARDS YEAR 1993 CAN CHANGER AVAILABLE CAN SIZE 36 x 48” COILER POSITION: LEFT CORNER AUTOLEVELLER AVAILABLE STATIONARY FLAT AT FRONT: 5 STATIONARY FLAT AT BACK: 3 X 5, 4 X 9 SUCTION: CENTRAL UPWARDS WIRE MAKE: ECC/BEKAERT CHUTE MAKE/MODEL: TRUETZSCHLER FBK 533 QUANTITY: 7 EMAIL US FOR PRICE & PICTURES INCLUDE OUR REFERENCE NUMBER Learn More

REFERENCE NUMBER: M-4075 (990GDMAXX8) L RIETER G5/1D RING FRAME YEAR 1988 – 432 SPINDLES, 41mm RING RIETER RING FRAME G5/1D 432 SPL./SET YEAR 1988 QUANTITY AVAILABLE: 1 SET Learn More

REFERENCE NUMBER: A-1233 (0101GHBXX12) A TRUTZSCHLER DK740 CARDING MACHINES YEAR 1991 YEAR: 1991 TYPE: DK740 QUANTITY AVAILABLE: 14 Learn More

REFERENCE NUMBER: M-4451 (1010BHAGXX9) K TRUTZSCHLER DK903 CARDING MACHINES YEAR 2003 TRUTZSCHLER DK903 CARDING MACHINES TYPE: AUTO LEVELER YEAR: 2003 MODEL: DK 903 AUTO LEVELLER AUTO CAN CHANGER CHUTE FEED CAN SIZE: 36x48 SERVO MOTOR: GERMANY INVERTER: LENZEN EXCELLENT CONDITION IN OPERATION QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: M-5086 (121265LDR11RL) L RIETER C60 HS CARDING MACHINES YEAR 2002 RIETER CARDING MACHINES YEAR 2002 TYPE C60 HS WITH RIETER CHUTE RIETER COILER WITH SB MODULE DRAWFRAME CAN SIZE 40” X 48” AUTOMATIC CAN CHANGER AUTOLEVELLER SINGLE LICKERIN EXCELLENT CONDITION QUANTITY AVAILABLE: 3 Learn More

M-5228 RIETER G33 COMPLETE PLANT YEAR 2003 WITH 24,000 SPINDLES

BLOWROOM LINE
(1) X A 11 RIETER BALE OPENER YEAR: 2003
(1) X B 10 RIETER FINE OPENER YEAR: 2003
(1) X METAL DETECTOR ARGEMA YEAR: 2003
(1) X FOREIGN FIBER DETECTOR JOSSI YEAR: 2003
(2) X B 60 RIETER CLEANER YEAR: 2003
(2) X A 70 RIETER MULTIMIXER YEAR: 2003

CARDING
(18) X RIETER C51 YEAR: 2003
WITH IGS SYSTEM, A70 CHUTE FEED
40X42” CAN, AUTOMATIC CAN CHANGER

PASSAGE DRAWFRAME
(4) X RIETER SB 15 YEAR: 2003
POWER CREEL
24X42” DELIVERY

LAP FORMER
(1) X E-32 YEAR: 2008
(1) X E-30 YEAR: 2002

COMBER
(5) X E-62 YEAR: 2002
(6) X E-65 YEAR: 2008

PASSAGE DRAWFRAME
(5) X RIETER RSB D35 YEAR: 2003

FLYER
(6) X RIETER F-11 YEAR: 2003
120 SPINDLES, WITH BLOWER, SEMI AUTOMATIC

RING
(20) X RIETER G-33 YEAR: 2003
1200 SPINDLE, P3-1 DRAFTING, 70mm GAUGE
40mm DIAMETER, 21CM TUBE, WITH INVERTER, AUTOMATIC DOFFING

WINDER
(8) X MURATA 21C YEAR: 2003
LOEPFE 940F CLEARER
G2Z SPLICER
CONICAL 5*57
STEEL DRUM
60 SPINDLES
WITH BLOWER

SPLIT SALE IS POSSIBLE
LABORATORY – NOT AVAILABLE
HEATSEATER – NOT AVALIABLE
SPARE PARTS – AVAILABLE
HUMIDIFICATION – NOT AVAILABLE

QUANTITY: 1

Learn More

H-1261 GOOSE FEATHER CLEANING MACHINE

LIST OF COMPONENTS FOR THE GOOSE FEATHER CLEANING MACHINE:

1) RINSING MACHINE OF THE TYPE 2000 (STAINLESS STEEL USED FOR IT)
EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM
QUANTITY: 1

2) GOOSE FEATHER ADDING MACHINE
EXTERIOR DIMENSION: 4000×1800×3300MM
QUANTITY: 1

3) WATER TANK
EXTERIOR DIMENSION: Ф1930MM×2440MM
QUANTITY: 1

4) DEWATERING MACHINE FLAT PLATE TYPE (BEING EQUIPPED WITH VARIABLE FREQUENCY CONTROL) - 2 SETS
QUANTITY: 2

5)DRYER OF THE TYPE 2000 (BEING EQUIPPED WITH ELECTRONIC WEIGHING)
EXTERIOR DIMENSION: 4500×2100×2900MM
QUANTITY: 1

6)GOOSE FEATHER ADDING MACHINE FOR DRYER(STAINLESS STEEL USED FOR IT AND ELECTRONIC WEIGHING INCLUDED)
EXTERIOR DIMENSION: 1500×1200×3600MM
QUANTITY: 1

7)THE COOLER OF THE TYPE 4700(STEEL & WOOD STRUCTURE, OPTIMIZED MOISTURE PROOF PANEL)
EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM
QUANTITY: 1

8) SORTING EQUIPMENT
QUANTITY: 2

9) POWER DISTRIBUTION CABINET
QUANTITY: 2

RINSING MACHINE: TYPE 2000

1. EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM DIAMETER

2.THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL IS USED FOR THE WALL FOR WASHING MACHINE AND 5MM IN THICKNESS FOR BARREL

3. THE MATERIAL OF AISI 1045 IS USED FOR THE SPINDLE OF THE SQUARE SHAPE(SPECIFICATION =108MMX108MM). WRAPPED WITH 2MM STAINLESS STEEL IN THE OUTER.
10MM IN THICKNESS STAINLESS STEEL IS FOR HOOP OF VANE.
4MM IN THICKNESS STAINLESS STEEL WHICH IS FOLDED IS FOR VANE.
HOOP SCREW OF M14 X 70 (HIGH STRENGTH GRADE) ARE USED.
THE BEARING HOUSING &BEARING OF UKP318 IS USED FOR THE SPINDLE.

4.THE SIEVE OF 1.5MM IN THICKNESS STAINLESS STEEL IS USED FOR WACHING MACHINE.THE HOLE IS 1.8MM IN DIAMETER. HOLE SPACING 3.8MM .THE STAINLESS STEEL OF 2MM IS USED FOR THE OBLIQUE OF OUTPUTTING THE GOOSE FEATHER.THE OUTLET NEAR DEWATERING MACHINE FOR GOOSE FEATHER CAN BE TURNED UPWARD. FOR GOOSE FEATHER.

5.THE PIPE FOR WATER INLET IS 114MM IN DIAMETER

6.THE POWER OF FAN: 7.5KW AND SPEED: 2900R/M

7.THE PIPE FOR FEEDING GOOSE FEATHER IS 250MM IN DIAMETER.

8.THE REDUCER FOR THE SPINDLE: JZQ-400. THE POWER OF MOTOR IS 15KW AND OUTPUT SPEED IS 42 R/M

9.EXTERIOR DIMENSION OF THE BOTTOM FOR WASHING MACHINE: WIDTH=1600MM;LENGTH=3500MM.ONE SIEVE OF 1MM IN THICKNESS FOR IT.

WATER TANK

1. THE DIMENSION OF TANK: Ф1930MM×2440MM

2.THE STAINLESS STEELOF 2MM IN THICKNESS FOR ITS BARREL AND 3MM FOR THE BOTTOM.THE COVER IS CONSTUCTED WITH ANGLE IRON OF STAINLESS STEEL AND INNER COVER 2MM STAINLESS STEEL PLATE.

DEWATERING MACHINE OF TYPE 1600

1. ONE SETS OF RINSING MACHING OF THE TYPE 2000 IS EQUIPPED WITH TWO SETS DEWATERING MACHINE OF THE TYPE 1600

2.THE POWER OF MOTOR=11KW-17KW.DOUBLE SPEED MOTOR WITH VARIABLE FREQUENCY CONTROL.

DRYER OF TYPE 2000

1. EXTERIOR DIMENSION: 4500×2100×2900×Ф1800MM（DIAMETER）

2. THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL(Q345R) IS USED FOR THE WALL FOR WASHING MACHINE. 10MM STAINLESS STEEL(Q345R) IS USED FOR INNER COVER OF THE BARREL AND 10MM STAINLESS STEEL (Q345R) PLATE FOR OUTER COVER OF THE BARREL.

3. THE INNER WALL OF WIND PLATE IS 0.5MM IN THICKNESS AND THE HOLE 1.5MM IN DIAMETER STAINLESS STEEL. 3MM COLD ROLLED PLATE IS USED FOR THE OUTER GATE.

4. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 10MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M12X70

6. THERE ARE FOUR INLET OF 1.5INCH IN DIAMETER FOR STEAM.
RELIEF VALVE FROM 3 KILO TO 7 (1 SETS)
THE PRESSURE GAGE (0-16 KILO) (2 SETS)
THE THERMOMETER (0-150 DEGREE) (1 SETS)
THERE ARE THREE DRAIN HOLE OF 1.5 INCH IN DIAMETER AT THE BOTTOM

6. THERE ARE TWO LAYERS FOR GOOSE FEATHER ADDING FOR DRYER: 1.5×1.2×3.6M.THEY ARE MADE WITH STAINLESS STEEL.THE SPECIFICATION OF CHARGING SPOUT ON THE TOP OF DRYER IS 1.55 X 0.55M.

7. THE OUTLET FOR GOOSE FEATHER OF DRYER CAN BE TURNED UPWARD.THE PIPE FOR OUTPUTTING GOOSE FEATHER IS 300MM IN DIAMETER.

8. TWO FANS ARE EQUIPPED FOR PRECISE WASHING LINE.THE POWER OF FAN FOR ADDING GOOSE FEATHER IS 7.5KW,SPEED: 2900R/M.WHICH IS USED TOGETHER WITH GOOSE ADDING MACHINE OF WASHING MACHINE.THE POWER OF FAN FOR DRYER IS 5.5KW,SPEED IS 2900 R/M.

9. MAIN SHAFT SPEED REDUCER FOR BELT BRIDGE MOTOR 7.5KW.OUTPUT SPEED IS 52 R/M
THE COOLER IS OF TYPE 4700

1. EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM DIAMETER

2. THE EXTERIOR IS CONSTRUCTED WITH THE WHOLE WOOD STRUCTURE.THE MATERIAL OF STEEL WITH 4# ANGLE STEEL AND 30X30 SQUARE TUBE IS FOR THE INNER SKELETON.

3. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 14MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M16X70

4. THE DIAMETER OF WIND PIPE: MAIN PIPE IS 300MM IN DIAMETER AND BRANCH IS 250MM IN DIAMETER.THERE ARE FOUR AIR OUTLET OF 300MM IN DIAMETER EQUIPPED EQUALLY SPACE.

5. ONE SIEVE IS EQUIPPED FOR THE COOLER.THE SIEVE IS MADE WITH 0.6MM IN THICKNESS GALVANIZED STEEL SHEET.THE HEIGHT OF HOLE IS 1.1MM.THE SCREEN FRAME IS MADE WITH 3# ANGLE STEEL.

6.THERE ARE TWO SORTING BOX WHICH IS CONSTRUCTED WITH STEEL FRAME AND WOODEN STRUCTURE. SIEVE 14 MESH GALVANIZED MESH BOLD

7. ONE FAN IS FOR THE COOLER.THE POWER OF THE FAN IS 11KW AND OUTPUT SPEED IS 2900 R/M

8. THE MOTOR FOR THE MAIN SPINDLE IS 15KW (6 POLE).THE SPEED OF 140 R/M IS FOR THE COOLER.

QUANTITY: 1

Learn More