Search results for: 'pre'

REFERENCE NUMBER: F-1422 BALE BREAKER/FIBER MIXING SYSTEM 03E (NEW) MACHINE IS USED TO MIX FIBERS (SILICONIZED, NON-SILICONIZED POLYESTER, LOW MELT POLYESTER, CONJUGATE, HOLLOW POLYESTER FIBER) IN DIFFERENT RATIO AND SEND TO THE CARDING MACHINE. TECHNIQUE DATA: CAPACITY: 400 TO 600KG/H TOTAL POWER: 4.45KW PRE-OPENING MACHINE POWER: 7KW MACHINE WORKING WIDTH: 1200mm PRE-OPENER WORKING WIDTH: 1000mm WEIGHING CAPACITY: 1500GM WEIGHING TOLERANCE: 6% VOLUME OF WEIGHING HOPPER: 0.3M³ WEIGHING SPEED: 3 TO 5 TIMES/MIN OVERALL MACHINE DIMENSIONS: 6300mm × 3360mm × 1300mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1246 COMPLETE RING SPINNING PLANT OF 17136 SPINDLES COMPLETE RING SPINNING PLANT OF 17136 SPINDLES CONSISTING OF BLOWROOM CARDING WASTE COLLECTION DEPARTMENT DRAW FRAME ROVING (SPEED FRAME) RING FRAME AUTO CORO WINDING YARN CONDITIONING MACHINES HUMIDIFICATION PLANT TESTING LAB ROVING OPENER (FOR SPEED FRAME BOBBINS) MACHINE SHOP WEIGH SCALES UTILITIES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4089 (990DJSKXX8) L

COMPLETE RIETER RING SPINNING & YARN DYE FACTORY – 37,056 SPINDLES- will sell individually

 

FACTORY WAS PRODUCING VARIOUS SPECIALTY YARNS FOR USE IN APPAREL AND TECHNICAL TEXTILES

ALL RING FRAMES SHORT STAPLE FOR FIBERS UP TO 40mm, 220mm TUBES, APPROXIMATELY HALF OF THE RING FRAMES ARE WITH PINTER CORE DEVICE OR AMSLER SLUBBING DEVICE. AMSLER AND PINTER AVAILABLE TO SELL SEPARATELY.

 

CARDING

COMBERS

ROVING/FLYERS

RING SPINNING

WINDING

TWISTING

COMPLETE YARN DYE HOUSE & DYE LAB

 

QUANTITY AVAILABLE: 1

Learn More

REFERENCE NUMBER: A-2471 INDUSTRIAL ELECTROSPINNING MACHINE A MASS PRODUCTION MACHINE OF ELECTROSPINNING. ALUMINUM FRAME STRUCTURE MAKES IT POSSIBLE FOR EXTENDING DIFFERENT FUNCTIONS. THE SPINNERET USED IS MULTI-NEEDLE ARRAYS, FROM 64 TO 384 NEEDLES ARE EQUIPPED. THE LENGTH AND WIDTH CAN BE MADE ACCORDING TO CUSTOMER'S REQUIREMENT. ROLL TO ROLL COLLECTOR AND CONTINUOUS COLLECTOR CAN BE USED BASED ON THE THICKNESS OF REQUIRED FIBER SHEET. FOR SOLUTIONS, A MULTI-CHANNEL PUMP WILL BE SUPPLIED FOR LONG TIME PRODUCTION OR NONE-STOP PRODUCTION. FEATURES: － EQUIPPED WITH BOTH POSITIVE & NEGATIVE HIGH VOLTAGE SUPPLY DEVICES － EQUIPPED WITH UNWINDING & WINDING MACHINES － CONTINUOUS ELECTROSPINNING & WINDING － ALUMINUM ALLOY FRAME STRUCTURE, MULTI-FUNCTIONS EXPANSIBLE － MULTI-NEEDLES IN ARRAYS. 16 NEEDLES X N ROWS, UP TO 384 NEEDLES － SPINNERET MOVING MACHINERY ENSURES EVEN FIBER SHEET － ONLINE AUTO-CLEAN DEVICE FOR NEEDLES － THICKNESS OF THE FIBER SHEET IS CONTROLLABLE － CE & FCC CERTIFICATE SPINNERET STANDARD：16 NEEDLES X 8 GROUPS =128 NEEDLES (THE NUMBER OF NEEDLES CAN BE ADJUSTED FREELY ACCORDING TO THE REQUIREMENTS OF USE） X-Y-Z MOTION SYSTEM － THE NOZZLE CAN BE MOVED UP AND DOWN IN THE Z DIRECTION THROUGH THE TOUCH SCREEN CONTROL TO DETERMINE THE APPROPRIATE SPINNING DISTANCE. － THE NOZZLE CAN MOVE BACK AND FORTH ALONG THE YAXIS DIRECTION OF THE TANGENT DIRECTION OF THE RECEIVING FILM TO PREPARE A UNIFORM FIBER FILM. － THE NOZZLE AUTOMATIC ONLINE CLEANING DEVICE SCANS ALONG THE X-AXIS DIRECTION. COLLECTOR － STAINLESS STEEL PLATE / MESH SERVES AS A CARRIER FOR THE FIBER MEMBRANE SUBSTRATE. － CONNECTED WITH NEGATIVE HIGH VOLTAGE. － RECEIVER BOARD WIDTH: 500 mm － SPINNING DISTANCE: 80 TO 300 mm ADJUSTABLE WINDER AND UNWINDER － AUTOMATICALLY CALCULATE THE ROLL DIAMETER OF THE LOADED MATERIAL AND CONTROL THE TENSION BETWEEN THE UNWINDING AND SPINNING SECTIONS. － CONSTANT FEEDING SPEED. THE FEEDING SPEED RANGE IS 0 TO 5000 mm / min. － ONLINE HOT PRESSING FUNCTION MODULE. AFTER THE SPINNING IS COMPLETED, BEFORE THE WINDING, A TEMPERATURE-CONTROLLED HOT PRESSING DEVICE (ROOM TEMPERATURE TO 60 ° C) IS USED FOR HOT PRESSING. (OPTIONAL THIRD LAYER MATERIAL STICKING AND REWINDING DEVICE). － CAN BE OPERATED BY TOUCH SCREEN. － DO NOT USE METAL FILM AS THE RECEIVING CARRIER. SYRINGE PUMP － 200ML X 4N CHANNEL － FLOW RATE: 0.1ML / H TO 1280 ML / H － SPECIALLY DESIGNED FOR ELECTRO-SPINNING AND RESISTANT TO HIGH VOLTAGE. HIGH VOLTAGE DEVICE －0 TO 50KV, DIGITAL DISPLAY －-50KV ~ 0 KV, DIGITAL DISPLAY －OUTPUT CURRENT: <1 MA －CONTINUOUSLY ADJUSTABLE CONTROL SYSTEM －PLC CONTROL SYSTEM, 7-INCH TOUCH SCREEN. －CONTROL THE MOVEMENT OF THE NOZZLE. －CONTROL THE NOZZLE TO MOVE UP AND DOWN. －YOU CAN SET THE MOVEMENT TIME, STROKE AND SPEED OF THE NOZZLE. －CONTROL THE FREQUENCY OF NOZZLE CLEANING. －SPINNING PROCESS PARAMETER RECORDS. ENVIRONMENTAL CONTROL SYSTEM －PROVIDE INTERFACE TO LET IN DRY AMBIENT HUMIDITY AIR. －AN EXTERNAL DEHUMIDIFIER CAN BE USED TO CONTROL THE AMBIENT HUMIDITY. THE EXTERNAL DEHUMIDIFIER NEEDS TO BE SELECTED ACCORDING TO THE SIZE OF THE WORKSHOP. THIS EQUIPMENT DOES NOT INCLUDE THIS DEHUMIDIFIER. EXHAUST SYSTEM －BOTTOM UP, AND FOUR FANS ARE PUMPED AT THE SAME TIME. －THE DISCHARGE VOLUME OF A SINGLE UNIT IS 5 TO 150 M3 / H, AND THE RATE IS ADJUSTABLE. THE COMBINED DISCHARGE VOLUME OF THE TWO EXHAUST FANS IS 10 TO 300M3 / H. THE EXTRACTOR IS DRAWN FROM THE MIDDLE. IN THIS WAY, THE HIGH-SPEED AIR VENTILATION MINIMIZES THE RELATIVE DISTURBANCE TO THE SPINNING. THE EXHAUST FAN IS A SILENT EXHAUST FAN. SAFETY －AUTOMATIC POWER-OFF DEVICE FOR OPENING THE DOOR. －RESIDUAL STATIC ELECTRICITY REMOVAL DEVICE. －EMERGENCY STOP SWITCH. －GROUND AT MULTIPLE POINTS. －ALARM DEVICE AFTER THE CONTROL PARAMETERS EXCEED THE LIMIT. CHAMBER －THE CHAMBER IS MADE OF ALUMINUM ALLOY FRAME. －THE FRONT AND SIDE WINDOWS OF THE CABINET ARE MADE OF TEMPERED GLASS. －MULTI-POINT TEMPERATURE AND HUMIDITY COLLECTION AND DISPLAY. －THE PROCESS CAN BE OBSERVED WITH THE NAKED EYE. －AIR INLET: HOT AND DRY AIR CAN BE INTRODUCED TO QUICKLY ADJUST THE HUMIDITY INSIDE THE CHAMBER. POWER SOURCE －220 VOLTS AND 50/60 Hz －TOTAL POWER: 10KW NUMBER OF NEEDLES: 128 NEEDLES (THE NUMBER OF NEEDLES CAN BE ARBITRARILY REDUCED ACCORDING TO THE SOLVENT USAGE) FLOW RATE OF EACH NEEDLE: (~ 3ML ± 50%) / HOUR TOTAL FLOW OF THE WHOLE MACHINE: ABOUT (400ML ± 50%) / HOUR SOLUTION CONCENTRATION: 10 TO 20% 8 HOURS SOLUTION PROCESSING CAPACITY: ABOUT (3L ± 50%) / 8 HOURS SOLID CONTENT (WEIGHT OF FIBER PRODUCED): (300G ± 50%) / 8 HOURS ACCORDING TO THE APPROXIMATE PRODUCTION OF FIBER MATERIAL WITH A GRAM WEIGHT OF 2GSM. WINDING AND UNWINDING SPEED: 50M / H MATERIAL WIDTH: 0.5 METERS FABRIC AREA PRODUCED PER HOUR: 25 SQUARE METERS FABRIC AREA PRODUCED IN 8 HOURS: 200 SQUARE METERS FABRIC AREA PRODUCED IN 24 HOURS: 600 SQUARE METERS BASED ON THE PRODUCTION OF FIBER MATERIAL WITH A GRAMMAGE OF 0.02G / ㎡, APPROXIMATELY: WINDING AND UNWINDING SPEED: 5000M / H MATERIAL WIDTH: 0.5 METERS FABRIC AREA PRODUCED PER HOUR: 2500 SQUARE METERS FABRIC AREA PRODUCED IN 8 HOURS: 20,000 SQUARE METERS FABRIC AREA PRODUCED IN 24 HOURS: ABOUT 60,000 SQUARE METERS Learn More

REFERENCE NUMBER: M-7735

PEYER / USTER FIBROLINER FL-100 (REFURBISHED)

 

MAKE: PEYER / USTER

MODEL: FIBROLINER FL 100

REFURBISHED

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: L-4845
MODEL: 4465
TENSION TESTING OPENING: 48”
COMPRESSION TESTING OPENING: 48”
DISTANCE BETWEEN COLUMNS/SCREWS: 16”
TESTING STROKE: 48”
TABLE SIZE: 16” X 6”
TESTING SPEED: .0004 TO 40 IPM

QUANTITY: 1

Learn More

P-4607 SCHLAFHORST 338D & 238 WINDER YEAR 1991 & 2000

1 SCHLAFHORST
TYPE: 338D
WINDER
YEAR: 2000
RIGHT HEAD STOCK
40 HEADS
DELIVERY 6 INCHES, CONICITY 4 DEGREE 20 FEET
CYLINDER 2 STEPS
CLEARERS USTER QUANTUM 3.10, HEAD MKC15F23
KNOTTERS THERMO SPLICER
TUBE FEEDING UP TO 330mm
1 TROLLEY AUTO DOFFING
AUTOMATIC FEEDING
2 PREPARATORS
MAGITEX TRAVELLING BLOWER
220V, 50Hz

1 SCHLAFHORST
TYPE: 238 UWDX 146
WINDER
YEAR: 1991
RIGHT HEAD STOCK
30 HEADS
DELIVERY 6 INCHES, CONICITY 4 DEGREE 20 FEET
CLEARERS LOEPFE YARN MASTER TK 740 AC
KNOTTERS SPLICER
1 TROLLEY AUTO DOFFING
FEEDER
WAXER
MAGITEX TRAVELLING BLOWER
220V, 50Hz

1 SCHLAFHORST
TYPE: 238 UWPDX 146
WINDER
YEAR: 1991
LEFT HEAD STOCK
30 HEADS
DELIVERY 6 INCHES, CONICITY 4 DEGREE 20 FEET
CLEARERS USTER POLYMATIC MK C15AC
KNOTTERS THERMO SPLICER
1 TROLLEY AUTO DOFFING
FEEDER
WAXER
MAGITEX TRAVELLING BLOWER
220V, 50Hz

QUANTITY: 3

Learn More

P-4073 SCHLAFHORST 238/147 V (LINK) WINDERS YEAR 1995

3 SCHLAFHORST
MODEL: 238.147 V (LINK)
WINDERS
YEAR: 1995
LEFT HEADSTOCK
24 POSITIONS
CLEARERS PEYER 551
DELIVERY 6 INCHES
1 TROLLEY AUTO DOFFING
KNOTTERS THERMO SPLICER
1 PREPARATOR
SCHLAFHORST TRAVELLING BLOWER
380V, 50Hz

OPTIONAL:
3 RESCH
STEAMERS
YEAR: 1995

QUANTITY: 6

Learn More

C-4678 SCHLAFHORST WINDERS 238/147 V, YEAR 1995

SCHLAFHORST WINDERS
MODEL: 238/147 V (LINK)
YEAR: 1995
LEFT HEAD STOCK
24 POSITIONS
CLEARERS PEYER 551
DELIVERY 6”
1 TROLLEY AUTO DOFFING
KNOTTERS THERMO SPLICER
1 PREPARATOR
SCHLAFHORST TRAVELLING BLOWER
380V 50HZ
OPTIONAL:
3 STEAMERS RESCH

QUANTITY: 3

Learn More

P-4706 TOYODA FL-100 ROVING FRAMES YEAR 1997 96 and 120 SPINDLES

TOYODA
MODEL: FL-100
ROVING FRAMES
YEAR: 1997
2 SETS WIITH 96 SPINDLES
2 SETS WITH 120 SPINDLES
STAFF (4 SPINDLES); 440mm
FULL BOBBIN DIAMETER: 152mm
LIFT: 406mm
EASY DOFFING DEVICE
DRAFTING SYSTEM: 4-ROLLER DOUBLE APRON D-TYPE
FOR 100% COTTON, COMBED OR CARDED
PROCESSING FIBRE UP TO 38mm, Ne 10-20s
WEIGHTING ARM: SKF-PK1500-001938
SHORT BOTTOM APRON
CRADLE TYPE: SKF OH 514-110
CCRADLE RADIUS: 34.5mm, WIDTH: 40mm
BOTTOM ROLLER = 28.5 (F) x 28.5 (S) x 28.5 (T) x 28.5 (B)
TOP ROLLER SKF
LP 315-110 (F) x LP 315-110 (S) x LP 317-110 (T) x LP 315-110 (B)
DIAMETER OF FLYER SPINDLE, 22mm
LIGHT ALLOW METAL FLYER, SL REINFORCED, SLIT LESS TYPE (FL 100)
SIZE OF FEEDING CAN: 508mm (20 INCHES) x 1321mm (52INCHES) SIZE
SINGLE SILVER FEEDING TYPE
INDICATOR: 3 SHIFTS
CLEARER: POSITIVE INTERMITTENT ROVING CLEARER WITH COMB FOR TOP AND BOTTOM ROLLERS
ELECTRIC CUSHION STARTER CONTROL FOR RUN AND INCHING
AUTOMATIC LUBRICATION FOR FLYER AND BOBBIN GEAR
MACHINE BACK COVER WITH BOBBIN JUMP PREVENTION DEVICE
VOLTAGE: AC 220/60Hz

SPECIAL OPTIONS INCLUDED ARE:
ROVING TENSION CONTROLLER
FLYER SPEED CONTROL BY INVERTOR
MAIN GEARING IN OIL BATH
DRAFT GEARING GREASE
IRREGULAR ROVING [REVENTING DEVICE
PACKAGE SHOULDER COLLAPSE PREVENTING DEVICE
STOP MOTION UPON LENGTH MEASURED SETTING COMPLETION

QUANTITY: 4 SETS

Learn More