Search results for: 'reference number -v-2'

REFERENCE NUMBER: P-2774
HOWA UA-33F RING SPINNING FRAME YEAR 1989 720 SPINDLES (LINK CONER WITH MURATA NO.7-II)
8 SETS HOWA
MODEL: UA-33F
(LINK CONER WITH MURATA NO. 7-II)
YEAR: 1989
8 SETS MURATA
TYPE: NO. 7-II (LINK CONER)
AUTO WINDER
YEAR: 1989
QUANTITY: 8 SETS

Learn More

REFERENCE NUMBER: P-2486 VOLKMANN VTS 07-0 5.10 TWISITNG MACHINE YEAR 1995 & 1996 160 SPINDLES VOLKMANN TYPE: VTS 07-0 5.10 TWISTING MACHINE YEAR: 1995 & 1996 160 SPINDLES EACH FEEDING TUBES LENGTH 250mm CAN DIAMETER 128mm OUTPUT 6 INCHES 4 DEGREES 20 FEET GUAGE 225mm AIR THREADING DEVICE WITH NEW ELECTRONIC MOTORS 240 VOLTS QUANTITY AVAILABLE: 5 Learn More

REFERENCE NUMBER: M-5364 (220WDFAXX1) L VOLKMANN VTS-07 TFO TWISTERS YEAR 1999 WITH 160 SPINDLES VOLKMANN 2X1 TWISTERS MODEL VTS-07 YEAR 1999 160 SPINDLES EACH FEEDING TUBES LENGTH 250mm CAN DIAMETER 128mm OUTPUT 6” 4°20, GAUGE 225mm AIR THREADING DEVICE WITH 1 SMIT DOUBLE MACHINE (NEW MACHINE NOT BEING INSTALLED) ASSEMBLY WINDER MODEL SESB/24, WITH 24 HEADS FOR ASSEMBLING UP TO 2 PLIES WITH CREEL IN MACHINE, DELIVERY TRAVERSE 6”, 4°20, WITH MESDAN WATER SPLICER QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: M-5373 (220RJAMHH1) L OPEN END SPINNING PLANT OPENER – CARDS (2) X RIETER UNIFLOC A1/2 BALE PLUCKER YEAR 1988 (12) X RIETER C4 CARDS YEAR 1988 (12) X RIETER AEROFEED TYPE U CHUTE FEED YEAR 1988 (3) X RIETER UNIMIX B-7/3R MIXER YEAR 1997 (1) X RIETER UNIMIX B-7/3R MIXER YEAR 2000 (1) X RIETER UNIMIX B-7/3R MIXER YEAR 1988 (1) X RIETER UNIMIX B-7/3 MIXER YEAR 1997 (2) X RIETER B-3/3R MIXER-OPENER YEAR 1988 (1) X RIETER B-1 OPENER YEAR 1988 (1) X RIETER B-50 OPENER YEAR 1988 (2) X RIETER B-50 OPENER YEAR 1997 (1) X RIETER ERM-B5/5 OPENER YEAR 1988 (1) X RIETER MONOCYLINDER B 4/1 OPENER YEAR 1988 (1) X RIETER UNIBLEND A80 (3 CHAMBERS) YEAR 1997 (1) X RIETER UNIBLEND A80 (2 CHAMBERS) YEAR 1997 (2) X RIETER UNISTORE A77 YEAR 1997 (1) X RIETER B-2/5 WASTE OPENER YEAR 1988 (1) X TRUTZSCHLER ABGANGOFFNER WASTE OPENER YEAR 1979 (1) X OMMI BLENDER YEAR 1998 DRAW FRAMES (2) X RIETER D1/2 DRAW FRAMES YEAR 1988 ROTOR SPINNING FRAMES (2) X SCHLAFHORST ACO-288 (SE-10) AUTOCORO (240 ROTORS) YEAR 1997 (3) X SCHLAFHORST-SUSSEN ACO-240 (SE-08/SC1-M) AUTOCORO (216 ROTORS) YEAR 1998-1995 (1) X SCHLAFHORST ACO-240 (SE-08) AUTOCORO (216 ROTORS) YEAR 1988 (4) X RIETER R-20 OPEN END (240 ROTORS) YEAR 1997 (4) X RIETER R-20 OPEN END (280 ROTORS) YEAR 1997 MISCELLANEOUS (1) X C+M WASTE PRESS YEAR 2001 (1) X SAN GRATO KALIE V3 PACKING MACHINE YEAR 1988 (1) X ITIPAC VKC/F-O WRAPPING MACHINE YEAR 1995 (1) X DALMEC BOX LIFT (1) X SAN GRATO PELLICANO PACKING MACHINE YEAR 1997 (1) X ITIPAC VKC/F-O WRAPPING MACHINE YEAR 1995 (1) X DALMEC BOX LIFT (1) X LUWA WASTE PRESS (1) X LAROCHE WASTE OPENER (3) X RIETER CONDENSER INFORMATION – DETAILS A. SE-10 AUTOCORO SCHLAFHORST OPEN-END YEAR 1997 MODEL ACO 288 TYPE SRK 240 POSITIONS NOZZLE KN 4 ROTORS T 231 BD YARN PRESENCE DEVICE EXIT CONICAL 4°20 6” TRAVERSE CLEARERS BARCO COROLAB 7 SPINNING BOX SE-10 01 SHUTTLE FOR 240 SPINDLES 02 ASW PIECERS WITH INTERNAL RESERVE WITH WAXING DEVICE BIG BELT FOR WASTE REMOVAL CONE DELIVERY WITH TWO BELTS 2 MAIN MOTOR DRIVEN BY FREQUENCY INVERTER VOLTAGE 380.3.50HZ COMBING ROLLER B 174 WITH ELECTRONIC YARN BREAK DETECTOR B. (4) X AUTOCORO SCHLAFHORST OPEN-END SPINNING MACHINES YEAR 1988/1997 MODEL ACO 240/SC1-M (3 MACHINES), ACO 240 SE08 (1 MACHINE) TYPE SRK 216 POSITIONS FEEDING CANS 500mm x 1160mm WITHOUT WHEELS NOZZLE KN4 ROTORS T 231 BD (1 MACHINE), T 236 BD (1), T 233 BD (1), T 33 (1) EXIT CONICAL 4°20 6” TRAVERSE CLEARERS USTER UPG4 SPINNING BOX THREE MACHINES SC1-M, ONE MACHINE SE08 1 SHUTTLE FOR 216 SPINDLES ONE MACHINE WITH 2 ASW PIECERS, THREE MACHINES WITH 1 ASW PIECER WITH INTERNAL RESERVE WITH WAXING DEVICE BIG BELT FOR THE WASTE REMOVAL CONE DELIVERY WITH TWO BELTS VOLTAGE 380.3.50HZ COMBING ROLLER B174 C. (12) X C4 RIETER CARDING MACHINES YEAR 1988 FEEDING BY CHUTE FEED AEROFEED U WORKING WIDTH 1000mm CARD CLOTHING FOR COTTON REVOLVING FLATS CENTRALIZED WASTE COLLECTION INTERMITTENT FIX FLATS IN ENTRY AND EXIT RIETER AUTOLEVELLER 1850-582 DIGITAL METER COUNTER IN METER MODEL DZ1 COILERS SIZE 1100mm x 1200mm DOFFER DRIVEN BY FREQUENCY INVERTER SAFETY COVERS FOR THE OPERATORS VOLTAGE 380.3.50HZ STATUS: STOPPED QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-4869 FIBER CARD AND SINGLE NOZZLE FILLING MACHINE (NEW) CARD MODEL: 1001-360 FILLER MODEL: 502 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-2473 SEMI INDUSTRIAL SCALE MULTI NOZZLE ELECTROSPINNING UNIT THE MAJOR ADVANTAGE OF THIS MACHINE IS SCALABILITY, AS IT’S SUITABLE FOR BOTH PRODUCTION LINE AS WELL AS R & D PROJECTS. IT FUNCTIONS WITH 56 NOZZLES ENABLING HIGH PRODUCTIVITY FOR MASS PRODUCTION OF NANOFIBERS, HOWEVER IT CAN ALSO FUNCTION WITH A SINGLE WHEN WORKING ON R & D PROJECTS. ITS UNIQUE DESIGN ENABLES PRODUCTION OF NANOFIBERS AND COMPOSITES, IT ACCOMMODATES FOUR SYRINGE PUMPS AND FOUR HIGH VOLTAGE POWER SUPPLIERS, MAKING IT POSSIBLE TO WORK SIMULTANEOUSLY WITH UP TO FOUR DIFFERENT POLYMERS, INDEPENDENTLY CONTROLLED. MACHINE USES A UNIQUE PATENTED HYBRID ELECTROSPINNING TECHNOLOGY. THIS NEW TECHNIQUE COMBINES THE ADVANTAGES OF BOTH NEEDLE - BASED AND NEEDLE - LESS ELECTROSPINNING, WHICH ARE INCLUDING BUT NOT LIMITED TO: HIGH THROUGHOUT PRODUCTIVITY (FROM THE NEEDLE - LESS), WITH A VERY ACCURATE CONTROL OVER THE PROCESS AND THE FINAL PRODUCT (FROM NEEDLE - BASED ELECTROSPINNING). SPECIFICATIONS: CHASSIS: ELECTROSTATIC PAINTED SHEET METAL FEEDING AREA MATERIAL: PE 1000 (HIGH DENSITY, CHEMICAL RESISTANT) COLLECTOR MATERIAL: STAINLESS STEEL LED ILLUMINATION EXHAUST FAN ATMOSPHERE CONTROL (OPTIONAL) TOTAL WEIGHT: APPROX. 650 KGS DIMENSIONS: 1965 X 2095 X 2012 mm HIGH VOLTAGE POWER SUPPLY NUMBER OF HV GENERATORS: 4 UNITS (1 FOR EACH SOLUTION FEEDING ROD) VOLTAGE RANGE: 0 TO 40 KV VOLTAGE PRECISION: 0.1 KV MAX CURRENT: 0.125 MA HIGH PRECISION MICRO PUMP NUMBER OF PUMPS: 4 UNITS FLOW RATE: 0.01 TO 4464 ML/H (BD 60 ML SYRINGE) FLOW RATE PRECISION: 0.01 ML AVAILABLE SYRINGES: ALL TYPES ARE AVAILABLE FEEDING AREA NUMBER OF NOZZLES ON EACH FEEDING PIPE SET: 14 PCS NUMBER OF FEEDING PIPE SETS: 4 PCS NUMBER OF NOZZLES: 56 PCS SINGLE NOZZLE PRODUCTION: AVAILABLE FEEDING PIPE MATERIAL: ALUMINUM NOZZLE MATERIAL: ELECTRICALLY CONDUCTIVE STAINLESS STEEL NOZZLE INNER DIAMETER: 0.8 mm MINIMUM REQUIRED SOLUTION FOR SINGLE NOZZLE FEEDING: 3 ML MINIMUM REQUIRED SOLUTION FOR EACH FEEDING PIPE SET: 15 ML MINIMUM REQUIRED SOLUTION FOR FULL LOADING: 50 ML SPINNING DISTANCE DISTANCE BETWEEN NOZZLE AND COLLECTOR: 30 TO 280 mm DISTANCE ADJUSTMENT PRECISION: 1 mm COLLECTOR ROLL TO ROLL COLLECTOR FIBER DEPOSITION WIDTH: 550 mm SUBSTRATE WINDING SPEED: 0,01 M/MIN TO 1 M/min REPETITIVE WINDING MODE (OPTIONAL) COATING HOMOGENEITY SYSTEM: X-AXIS REPETITIVE MOTION STROKE OF COATING HOMOGENEITY SYSTEM: 10 MM TO 80 mm SPEED OF COATING HOMOGENEITY SYSTEM: 2 TO 20 mm/SEC UNIQUE USER INTERFACE 12" TOUCH SCREEN CONTROL PANEL WITH WELL DESIGNED USER FRIENDLY INTERFACE FULLY ABLE TO CONTROL ALL PARAMETERS SAVING & RECALLING ALL PARAMETERS VIA RECIPE & RECALL FUNCTION SAFETY FUNCTION SAFE DOOR EMERGENCY BUTTON & SAFETY RELAY HV WARNING LIGHT ELECTRICAL ISOLATED & GROUNDED CABINET OVER CURRENT PROTECTION TECHNICAL REQUIREMENTS POWER: 220 VOLTS AND 50/60 HZ @ MAX 25A GROUNDING: EXTERNAL GROUNDING LINE AREA: MIN. 3000 X 3000 mm Learn More

REFERENCE NUMBER: A-2472 INDUSTRIAL SCALE MULTI NOZZLE ELECTROSPINNING UNIT MACHINE HAS A HIGH PRODUCTION CAPACITY. IT ALSO ENABLES EASY MONITORING AND MANAGEMENT OF ALL PARAMETERS THAT ARE EFFECTIVE IN THE PRODUCTION OF NANOFIBERS. FOR THE COMMERCIAL PRODUCTION, REPEATABLE PRODUCTION OF MATERIALS IN UNIFORM AND SPECIFIC STANDARDS HAS THE HIGHEST IMPORTANCE. MACHINE IS EQUIPPED WITH 132 ELECTROSPINNING NEEDLES AND A HOMOGENIZATION SYSTEM, ALLOWING THE SURFACE TO BE UNIFORMLY AND CONTINUOUSLY AT A WIDTH OF 1 METER. BECAUSE OF ITS ADVANCED AUTOMATION SYSTEM AND THE AIR CONDITIONING EQUIPMENT, IT ENABLES CONTINUOUS PRODUCTION AT THE HIGHEST SET QUALITY EVEN UNDER CHANGING ENVIRONMENTAL CONDITIONS. SPECIFICATIONS: SPINNING-TYPE: BOTTOM-UP SPINNING CHASSIS: ELECTROSTATIC PAINTED SHEET METAL FEEDING AREA MATERIAL: PE 1000 (HIGH DENSITY, CHEMICAL RESISTANT) COLLECTOR MATERIAL: STAINLESS STEEL LED ILLUMINATION EXHAUST FAN ATMOSPHERE CONTROL (OPTIONAL) TOTAL WEIGHT: APPROX. 600 KGS DIMENSIONS: 3650 x 1950 X 1940 mm HIGH VOLTAGE POWER SUPPLY VOLTAGE RANGE: IN THE SPINNERET 0-(+)60 KV VOLTAGE PRECISION: 0.1 KV MAXIMUM CURRENT: 3 MA PUMP SYSTEM FLOW RATE: 0.01 TO 4464 ML/H (BD 60 ML SYRINGE) FLOW RATE PRECISION: 0.01 ML CONTINUES FEEDING PUMP SYSTEM FEEDING AREA NUMBER OF NOZZLES ON EACH FEEDING PIPE SET: 33 PCS NUMBER OF FEEDING PIPE SETS: 4 PCS NUMBER OF NOZZLES: 132 PCS SINGLE NOZZLE PRODUCTION: AVAILABLE FEEDING PIPE MATERIAL: ALUMINUM NOZZLE MATERIAL: ELECTRICALLY CONDUCTIVE STAINLESS STEEL NOZZLE INNER DIAMETER: STANDARD NOZZLE: 0.8 mm (DIFFERENT DIAMETERS CAN BE USED) MINIMUM REQUIRED SOLUTION FOR SINGLE NOZZLE FEEDING: 3 ML MINIMUM REQUIRED SOLUTION FOR EACH FEEDING PIPE SET: 25 ML MINIMUM REQUIRED SOLUTION FOR FULL LOADING: 150 ML SPINNING DISTANCE DISTANCE BETWEEN NOZZLE AND COLLECTOR: 50 mm TO 350 mm DISTANCE ADJUSTMENT PRECISION: 1 mm COLLECTOR ROLL TO ROLL COLLECTOR FIBER DEPOSITION WIDTH: 1000 mm SUBSTRATE WINDING SPEED: MAX. 0,1 M/ min TO MIN. 10 M/ min COATING HOMOGENEITY SYSTEM: X-AXIS STROKE OF COATING HOMOGENEITY SYSTEM: 30 mm TO 80 mm SPEED OF COATING HOMOGENEITY SYSTEM: 2 TO 20 mm/SEC UNIQUE USER INTERFACE 12” TOUCH SCREEN CONTROL PANEL WITH WELL DESIGNED USER FRIENDLY INTERFACE FULLY ABLE TO CONTROL ALL PARAMETERS SAVING & RECALLING ALL PARAMETERS VIA RECIPE & RECALL FUNCTION SAFETY FUNCTION SAFE DOOR EMERGENCY BUTTON & SAFETY RELAY HV WARNING LIGHT ELECTRICAL ISOLATED & GROUNDED CABINET OVER CURRENT PROTECTION TECHNICAL REQUIREMENTS POWER: 220 VOLTS AND 50/60 Hz @ MAX 25A GROUNDING: EXTERNAL GROUNDING LINE AREA: MIN. 5000 X 3000 mm Learn More

REFERENCE NUMBER: A-2478 ADVANCED LEVEL SINGLE NOZZLE ELECTROSPINNING UNIT - STATIONARY PLATE COLLECTOR THIS ELECTROSPINNING UNIT IS A MODEL IN BETWEEN BASIC AND ADVANCED ELECTROSPINNING SYSTEMS. ALL PROCESS PARAMETERS CAN BE ADJUSTED FROM ITS PROGRAMMABLE EASY-TO-USE TOUCH SCREEN PANEL. IT ALSO HAS A SPECIAL DESIGNED ISOLATED CHASSIS AND AN EXHAUST SYSTEM THAT ENABLES WORKING WITH EVAPORATIVE SOLVENTS. THANKS TO THE ADVANCED SAFETY FEATURES, THE DOOR SAFETY SYSTEM AND THE ISOLATED CHASSIS, SCIENTISTS CAN CARRY OUT THEIR EXPERIMENTS IN SAFE CONDITIONS, WITHOUT WORRYING ABOUT ANY RISK OF USERS’ HEALTH ENDANGERMENT. SPECIFICATIONS: SPINNING-TYPE: BOTTOM-UP SPINNING CHASSIS: ELECTROSTATICALLY PAINTED STEEL FEEDING AREA MATERIAL: PE 1000 (HIGH DENSITY, CHEMICAL RESISTANT) COLLECTOR MATERIAL: 7000 SERIES ALUMINUM ALLOY, STAINLESS STEEL LED ILLUMINATION EXHAUST FAN ATMOSPHERE CONTROL (OPTIONAL) TOTAL WEIGHT: APPROX.150 KGS DIMENSIONS: 770 X 675 X 1040 mm HIGH VOLTAGE POWER SUPPLY VOLTAGE RANGE: 0 TO 40 KV VOLTAGE PRECISION: 0.1 KV MAX CURRENT: 0.125 MA HIGH PRECISION MICRO PUMP FLOW RATE: 0.01 TO 4464 ML/H (BD 60 ML SYRINGE) FLOW RATE PRECISION: 0.01 ML/H AVAILABLE SYRINGES STANDARD: ALL TYPES ARE AVAILABLE FEEDING AREA NUMBER OF NOZZLES: 1 NOZZLE NOZZLE INNER DIAMETER: 0.8 mm COMPATIBLE WITH STANDARD SYRINGE NOZZLES MINIMUM REQUIRED SOLUTION FOR SINGLE NOZZLE FEEDING: 2 ML SPINNING DISTANCE DISTANCE BETWEEN NOZZLE AND COLLECTOR: 13 TO 213 mm DISTANCE ADJUSTMENT PRECISION: 1 mm STATIONARY PLATE COLLECTOR MATERIAL: STAINLESS STEEL DIMENSIONS OF STATIONARY PLATE: 370 X 130 mm UNIQUE USER INTERFACE 9" TOUCH SCREEN CONTROL PANEL WITH WELL DESIGNED USER FRIENDLY INTERFACE FULLY ABLE TO CONTROL ALL PARAMETERS SAVING & RECALLING ALL PARAMETERS VIA RECIPE & RECALL FUNCTION SAFETY FUNCTION SAFE DOOR EMERGENCY BUTTON & SAFETY RELAY HV WARNING LIGHT ELECTRICAL ISOLATED & GROUNDED CABINET OVER CURRENT PROTECTION FULLY SEALED CABINET TECHNICAL REQUIREMENTS POWER: 220 VOLTS AND 50/60 HZ @ MAX 25A GROUNDING: EXTERNAL GROUNDING LINE AREA: MIN. 1000 X 1000 mm WORKBENCH ABLE TO CARRY MINIMUM 150 KGS. Learn More

REFERENCE NUMBER: A-2477 ADVANCED LEVEL SINGLE NOZZLE ELECTROSPINNING UNIT - DRUM COLLECTOR MACHINE IS A LABORATORY SCALE ELECTROSPINNING UNIT WITH A SINGLE NOZZLE. THE STANDARD MACHINES HAVE A 500 RPM ROTATING DRUM COLLECTOR AND A FLAT COLLECTOR. THERE ARE OPTIONAL ACCESSORIES UPON REQUEST FOR FUNCTIONALITY IMPROVEMENT. OPERATION PARAMETERS LIKE THE NEEDLE-COLLECTOR DISTANCE AND HIGH VOLTAGE VALUE COULD BE AUTOMATICALLY ADJUSTED FROM THE USER PANEL, WITH HIGH PRECISION. THE SYSTEM COMES WITH AN ENCLOSED CABINET MAKING IT POSSIBLE TO ADD TEMPERATURE AND RELATIVE HUMIDITY CONTROL SYSTEMS. SPECIFICATIONS: SPINNING-TYPE: BOTTOM-UP SPINNING CHASSIS: ELECTROSTATICALLY PAINTED STEEL FEEDING AREA MATERIAL: PE 1000 (HIGH DENSITY, CHEMICAL RESISTANT) COLLECTOR MATERIAL: 7000 SERIES ALUMINUM ALLOY, STAINLESS STEEL LED ILLUMINATION EXHAUST FAN ATMOSPHERE CONTROL (OPTIONAL) TOTAL WEIGHT: APPROX.150 KGS DIMENSIONS: 770 X 675 X 1040 mm HIGH VOLTAGE POWER SUPPLY VOLTAGE RANGE: 0 TO 40 KV VOLTAGE PRECISION: 0.1 KV MAX CURRENT: 0.125 MA HIGH PRECISION MICRO PUMP FLOW RATE: 0.01 TO 4464 ML/H (BD 60 ML SYRINGE) FLOW RATE PRECISION: 0.01 ML/H AVAILABLE SYRINGES STANDARD: ALL TYPES ARE AVAILABLE FEEDING AREA NUMBER OF NOZZLES: 1 NOZZLE NOZZLE MATERIAL: ELECTRICALLY CONDUCTIVE STAINLESS STEEL NOZZLE INNER DIAMETER: 0.8 mm COMPATIBLE WITH STANDARD SYRINGE NOZZLES MINIMUM REQUIRED SOLUTION FOR SINGLE NOZZLE FEEDING: 2 ML SPINNING DISTANCE DISTANCE BETWEEN NOZZLE AND COLLECTOR: 33.5 TO 233.5 mm DISTANCE ADJUSTMENT PRECISION: 1 mm ROTATING COLLECTOR DRUM COLLECTOR MATERIAL: ALUMINUM DIMENSIONS OF DRUM: 100 X 150 mm FIBER DEPOSITION AREA: 314 X 150 mm DRUM ROTATING SPEED: 100 TO 500 RPM SURFACE SPEED: 52.3 CM/S TO 261.6 CM/S STATIONARY PLATE COLLECTOR MATERIAL: STAINLESS STEEL DIMENSIONS OF STATIONARY PLATE: 370 X 130 mm UNIQUE USER INTERFACE 9" TOUCH SCREEN CONTROL PANEL WITH WELL DESIGNED USER FRIENDLY INTERFACE FULLY ABLE TO CONTROL ALL PARAMETERS SAVING & RECALLING ALL PARAMETERS VIA RECIPE & RECALL FUNCTION SAFETY FUNCTION SAFE DOOR EMERGENCY BUTTON & SAFETY RELAY HV WARNING LIGHT ELECTRICAL ISOLATED & GROUNDED CABINET OVER CURRENT PROTECTION FULLY SEALED CABINET TECHNICAL REQUIREMENTS POWER: 220 VOLTS AND 50/60 HZ @ MAX 25A GROUNDING: EXTERNAL GROUNDING LINE AREA: MIN. 1000 X 1000 mm WORKBENCH ABLE TO CARRY MINIMUM 150 KGS. Learn More

REFERENCE NUMBER: M-7424
MAKE: SAVIO
MODEL: FLEXIROTOR 7000 / DUO-SPINNER
YEAR: 2008

QUANTITY: 21 

Learn More