Search results for: 'reference number -v-2'

P-4950 COMPLETE SPINNING PLANT – ZINSER – RIETER – FOR FIREPROOF THREAD

THIS SPINNING PLANT WAS COMPLETELY MODERNIZED IN 2008
PREPARED TO WORK FIREPROOF THREAD
THIS PLANT IS COMPLETED WITH ALL ITS MECHANISMS TO OPERATE AT THE TIME
HAS A MOISTURE CONDITIONER FOR THE ENTIRE FACTORY WITH WATER FILTERS AND DIFFERENT COMPARTMENTS WITH APPROXIMATELY 20M LONG AND 4M WIDE
IT ALSO HAS 2 CHAMBERS FOR DRYING THE YARN
THE PRODUCTION THICK YARNS TYPES AND TYPES OF MATERIAL THAT CAN WORK THIS SPINNING.
THE RELATIONSHIPS OF THE MACHINES:
1 BOILER VYC 12 BAR.
1 AUTOCLAVE TAINOX
1 ELECTRIC INDUSTRIAL SCALES
1 OPENING (RIETER)
1 CARDING RIETER
1 CARDING RIETER
1 DRAWING FRAME (24)
1 ROVING FRAME (24)
5 SPINNING FRAME G/01, ZINSER. (118X2 UNIT)
1 SPINNING FRAME G/01, RIETER (108X2 UNIT)
1 AUTOMATIC SCHLAFHORST AUTOCONER. ( 40 )
1 CENTRAL TEMPERATURE / HUMIDITY OF APPROX 20 M X 4 M.
2 CABINS DRYING.
1 FULL LAVORATORIO
2 COMPRESSORS (25 AND 30 HP)
1 DRYER
1 DEPOSIT OF AIR,
*ALL ACCESSORIES IN THE FACTORY.
STOCK ALSO NO THREAD IN LYCRA, ALSO MATERIALS IN BALES

QUANTITY: 1 COMPLETE PLANT

P-4948 VOLKMANN VTS09 TFO WIDTH 90mm 180 SPINDLES

VOLKMANN
MADE: GERMANY
MODEL: VTS09
TFO
180 SPINDLES PER MACHINE
LENGTH: 21,400mm
WIDTH: 90mm
HEIGHT: 1780mm
DRUM DIAMETER: 330mm
SPINDLE GUAGE: 200mm

QUANTITY: 8

M-5175 OLBRICH COATING LINE FOR MANUFACTURING TARPAULIN AND BANNER PVC COATED FABRICS 3300mm

KNIFE OVER ROLL COATING
LIST OF EQUIPMENT FOR MANUFACTURING OF PVC COATED FABRICS, LINE CAN APPLY ANY TYPE OF COATING INCLUDING WATER BASED OR SOLVENT BASED AND EITHER CLEAR COAT THE FABRIC OR SATURATE COAT ANY WOVEN FABRIC , CAN ALSO DO SUNBRELLA TYPE TECHNICAL TEXTILES
FOR ONE SIDE COATING WITH KISS COATER

MANUFACTURED BY OLBRICH GMBH (ERECTED IN 2005) 3400mm (SCRIM CAN BE 3400mm WIDTH)
CAN MAKE 3350mm COATED FABRIC AND AFTER TRIMMED EDGES HAVE A FINISHED PRODUCT OF 3300mm (BEGINNING WITH A 3400mm SCRIM , THERE ARE INBUILT CUTTING BLADES FOR TRIMMING .
MANUFACTURED IN GERMANY BEGINNING 2003 AND 2004

COATING LINE
UNWINDER
PENDULUM
WEB CONTROL UNIT
PULLING STATION
PENDULUM
HEATING ROLLER (DIAMETER 570 mm)
PLATFORM
SAWING GAUGE
DOUBLE-KNIFE (DOCTOR) VERTICAL COATING MACHINE
VERTICAL DRIER
COOLING STATION WITH ROLLER LOCK
PENDULUM
SMOOTHING ROLL
MACHINE FRAME
IDLER ROLLER BRIDGE
PULLING STATION
PLATFORM
COATING MACHINE (KNIFE-OVER-ROLL)
HORIZONTAL DRIER
COOLING STATION
IDLER ROLLER BRIDGE
PLATFORM
SMOOTHING CALENDER
SUCTION HOOD
LACQUERING MACHINE (ZIMMER)
TEMPERATURE CONTROL UNIT
DRYER
ACCUMULATOR OF FABRIC
COMPUTER WITH SOFTWARE CONTROL
(SIEMENS)
ELECTRICAL CONTROL PLANT
WEIGHT-PER-UNIT-AREA
MEASURING GAUGE (2 UNITS MAHLO)-ISOTOPE NOT INCLUDED
REWINDER
FREE STANDING SLITTER-REWINDER (SEE PHOTO ATTACHED)
TRIMMING GOUGE

PERIPHERAL EQUIPMENT
LIQUIFIED GAS EQUIPMENT RH80 (RANSOME MANUFACTURING USA)
EVAPORATOR-RANSOME (USA)
CHILLER (ITALY) WITH EXPANSION TANK
BOILER ERENSAN MODEL 2000 (ISI SANAYI A.S. TURKEY) FOR HEATING OIL WITH EXPANSION TANK.
\BOILER FOR HEATING BUILDING, NOT INCLUDED
REGENERATIVE THERMAL OXIDIZER (RTO) ENVIROLOGIC USA
12 STAINLESS STEEL CONTAINERS FOR PLASTISOL VOLUME -1 M3
VACUUM DISSOLVER (SRUGO)-2 UNITS
PIPING, EXHAUST VENT PIPES (NO BUILDING HEATING PIPES )
OVERHEAD CRANE NOT INCLUDED

FLOORSPACE OCCUPIED BY THE LINE:
LENGTH 67,125mm
WIDTH 6200mm
HEIGHT 8100mm

SPEED 3 TO 30 M/MIN

HEATING SYSTEM: OIL

QUANTITY: 1 LINE

A-2101 MURATA VORTEX MSV861 AIR JET SPINNING FRAMES, YEAR 2006-2007, 80 SPINDLES

YEAR: 2006
MODEL: MSV861
80 SPINDLES PER FRAME
6 INCH TUBE TAKE UP
3 MURATEC SPLICERS PER FRAME
1 MARATEC AUTOMATIC DOFFERS WITH FRONT YARN CONVEYORS
MURATEC “VOS II” YARN MANAGEMENT SYSTEM
WAXING DEVICES
SPINDLES INSTALLED: 1/3 (SPARE DIAMETER 1.1 & 1.2)
NEEDLE HOLDER: 2PZ8.8L8
NOZZLE: 4 HOLES ECO (Z)1
4 LINE SILVER CREELS FOR 20 INCH DIAMETER CANS
1 MACHINE SET UP FOR COTTON

YEAR: 2007
MODEL: MVS861
80 SPINDLES
6 INCH TUBE TAKE UP
3 MURATEC SPLICERS
1 MURATEX AUTOMATIC DOFFERS WITH FRONT YARN CONVEYORS
MURATEC “VOS II” YARN MANAGEMENT SYSTEM
WAXING DEVICES
SPINDLES INSTALLED: 1/3 (SPARE DIAMETER 1.1 & 1.2)
NEEDLE HOLDER: 2PZ8.8L8
NOZZLE: 4 HOLES ECO (Z)1
4 LINE SILVER CREELS FOR 20 INCH DIAMETER CANS

QUANTITY: 2

A-2100 MURATA VORTEX SPINNING MVS870, YEAR 2001, 96 SPINDLES, 50 HZ

MODEL: MVS870
YEAR: 2011
VOLTAGE: 380V / 50 Hz
96 SPINDLES
(1) LEFT HAND WITH PACKAGE CONVEYOR
RIGHT TO LEFT, WITH PACKAGE LIFTER
(1) RIGHT HAND WITH PACKAGE CONVEYOR
LEFT TO RIGHT, WITH PACKAGE LIFTER
YARN CLEARER
MSC-F (WITH FOREIGN FIBERS DETECTION
PACKAGE: 6” PARALLEL
WAXING DEVICE
1 SET OF ORIENT NOZZLES – Z TWIST/MACHINE
1 SET OF ORIENT NEEDLE HOLDERS/MACHINE
1 SET OF ORIENT MIDDLE SPINDLES/MACHINE
1 SET OF ORIENT FINE SPINDLES/MACHINE
3 SPLICING CARRIAGES/MACHINE
1 AUTODOFFER/MACHINE
AUTOMATIC WASTE FIBER EXTRACTION
OVERHEAD BLOW CLEANER/MACHINE

QUANTITY: 2

C-2489 TOYOTA RX240 RING FRAMES LINKED TO MURATA 7-V WINDERS WITH 960 SPINDLES, YEAR 2000

YEAR: 2000
NO. OF SPINDLES: 960
SPINDLE GAUGE: 75mm
RING DIA/MAKE: 45mm
BOBBIN LENGTH: 230mm
PNEUMAFILL SUCTION: FLUTE
OHTC: PNEUMABLO

LINKED TO:

6 X MURATA 7-V
YEAR: 2000
NO. OF DRUMS: 21 - 23 DRUMS
YARN CLEARER TYPE: KEISOKKI SU-24
SPLICER: G2Z
WAXING: AVAILABLE
CONICITY: 5º57

QUANTITY: 6

R-1729 USTER TESTER 5 S400 VERSION, YEAR 2012

USTER TESTER 5 S400 VERSION
YEAR: 2012
BASIC MODULE FOR U%
CV% HAIRINESS MODULE CONVEYOR
MODULE FOREIGN MATTER MODULE
WITH KEYBOARD
LCD MONITOR AND COMPUTER SYSTEM

QUANTITY: 1

R-1726 MURATEC 21C WINDER WITH 60 DRUMS, YEAR 2010

MURATEC 21C WINDER
YEAR: 2010
60 DRUMS MAGAZINE
TYPE FEED
USTER QUANTUM 2
MEASURING HEAD
MODEL: IMK C20
CONICITY: 4º20
WAXING DEVICE
1 AUTO DOFFERS
STEEL DRUM WITH 2.5 TURNS
G2Z SPLICER
ORIGINAL MURATA OVER HEAD CLEARER
AVAILABLE: IMMEDIATELY
CONDITION VERY EXCELLENT LIKE NEW

QUANTITY: 2

C-3729 RIETER OE R 20 WITH 300 ROTORS, YEAR 2002

RIETER
MODEL: OE R 20
YEAR: 2002
300 ROTORS
CYLINDRICAL PACKAGE: 170mm HEIGHT X 320mm DIAMETER
PACKAGE WEIGHT MAXIMUM: 3.0 KGS
ROTOR DIAMETER: 28 OR 30mm
OB 20 (UNIVERSAL)
COMBERS SPEED: 7000 TO 9000 RPM
ROTORS SPEED: 90 TO 100 000 RPM
MANUFACTURED YARNS: VISCOSE
VISCOSE/PES - TEX 20, 25, 30
WAXING DEVICE
AUTOMATIC DOFFING (2 PER MACHINE)
BLOWER
USTER QUANTUM
3 X 380V
50 HZ
6 BARS

QUANTITY: 1

C-1426 COMPLETE RIETER G33 RING SPINNING PLANT 29,000 SPINDLES, YEAR 1996

RING FRAMES,
FLYERS AND DRAW FRAMES
INSTALLED YEAR 2000
BLOWROOM AND CARDS INSTALLED YEAR 1996

-RIETER BLOWROOM

RIETER UNIFLOC A10, 2300MM, 36.8M
ARGEMA ELECTRONIC METAL DETECTOR
RIETER WASTE OPENER B2/5
RIETER UNICLEAN B10
2 RIETER UNIMIX B7/3
4 RIETER UNIFLEX B7/3

PNEUMATIC FIBRE CONVEYANCE, EXHAUST FANS,
DUST EXTRACTOR FANS,
TRANSPORT FANS, 2 TWO-WAY DISTRIBUTORS,
4 HIGH SPEED BY-PASS VALVES
ELECTRICAL CONTROL PANEL

-RIETER CARDS

12 RIETER C50 CARDS WITH CHUTE FEED AEROFEED A7/U
AUTOMATIC WASTE REMOVAL SYSTEM,
TRANSPORT FANS, BY-PASS VALVES.
RINSING VALVES AND LOCKING VALVES

-RIETER DRAW FRAMES

4 RIETER DRAW FRAMES TYPE SB-D10, 20” X 42” CANS
4 RIETER DRAW FRAMES TYPE RSB-D30, 20” X 42” CANS

-RIETER ROVING FRAMES

8 RIETER ROVING FRAMES , TYPE F10, 120 SPINDLES
LUWA TRAVELLING CLEANERS

-RIETER RING FRAMES

30 RIETER G33 RING FRAMES, 960 SPINDLES
10 FRAMES RINGS 42MM DIA, 70MM GAUGE, LIFT 220MM

20 FRAMES RINGS 45MM DIA, 70MM GAUGE, LIFT 230MM
LUWA TRAVELLING CLEANERS

-CONE WINDING

8 MURATA CONE WINDERS, 60 HEADS EACH
(4 X TYPE 7-2 FROM 1985 AND 4 X 7-V FROM 1996)

-LABORATORY

USTER TESTER 4
USTER TENSORAPID UTR-3

-ACCESSORIES

OTIMA VACUUM STEAMER
COMPRESSORS,

PLANT IS RUNNING NOW
INSPECTION WELCOME ANY TIME

QUANTITY: 1