Search results for: 'f&k''

REFERENCE NUMBER: G-8444-A PUNCHING MACHINE MODEL FST 11 FOR LATEX MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-0929 FOAM PROFILE CUTTING MACHINE FOR DOUBLE MATTRESSES WORKING CUTTING WIDTH: 1800mm WORKING CUTTING LENGTH: 2100mm MAXIMUM HEIGHT FROM TABLE TO BLADE: 0/250mm LOADING TABLE: 2200 X 1980mm VERTICAL STROKE OF THE PRESS-CONVEYOR: 0/250mm PASSAGE BETWEEN OUTPUT ROLLER AND TABLE: 25/540mm MAXIMUM HEIGHT OF FOAM TO BE WORKED: 220mm MAXIMUM MATTRESS DIMENSION: 1960 X 2100mm TABLE SPEED: 0-20 M/MIN POWER KW: 15 WEIGHT APPROXIMATELY: 4900 KGS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-9015 HORIZONTAL MOVING TABLE FOAM CUTTING MACHINE (WITH AUTOMATIC WINDING SYSTEM) TABLE IS 16 METERS LONG, TO ACCOMMODATE 50 FOOT LONG BUNS X 51" MAXIMUM HEIGHT. WITH A 2.15 METER CUTTING WIDTH AND 16 METER MOVING TABLE, THE FLOORSPACE OF THE WHOLE MACHINE IS ABOUT L 35 METERS X W 4200mm X H 2400mm (116 FEET LONG; 165" OVERALL WIDTH) QUANTITY AVAILABLE: 1 Learn More

INVENTORY NUMBER: E-9456-A FOAM BUN COMPRESSION AND PACKAGING MACHINE 10 METERS LONG BUILT OF RIGID STEEL BEAMS AND HEAVY PLATE MAXIMUM OIL PRESSURE: 60 TONS COMPRESSION UNIT WITH TWO HYDRAULIC CYLINDERS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5211 (1313465Z12UC) L FOAM CONSTANT-LOAD POUNDING FATIGUE TESTER FOAM CONSTANT-LOAD POUNDING FATIGUE TESTER MODEL: L64 DETERMINE THE THICKNESS REDUCED VALUE AND HARDNESS DECREASED VALUE OF POROUS ELASTIC MATERIALS USED IN INTERIOR DECORATION. PUT A SQUARE SAMPLE ON THE LOWER PLATFORM, AND REPEATEDLY RECESS THE SAMPLE BY AN INDENTER, WHOSE SIZE IS SMALLER THAN THE SPECIMEN. REACH THE MAXIMUM LOAD UNDER A CERTAIN RANGE DURING EACH IMPACT PERIOD, AND THEN EVALUATE THE SAMPLE PERFORMANCE AFTER A CERTAIN TIME. KEY SPECIFICATION: TEST SPEED: 70±5 R/MIN TEST TIMES: 0~999999 TIMES, SETABLE UPPER PLATEN: DIAMETER Ø 250mm FILLET OF LOWER EDGE: R25mm STROKE: 80mm SAMPLE LOAD: 750±20N DIMENSION (SPECIMEN): (380±20)x(380±20)x(50±2)mm COUNTING: 0~999 999 TIMES SIZE (WxDxH): 69x50x115CM WEIGHT: ABOUT 150KG POWER: 380V STANDARD: GB/T 18941, GB/T 12825, ISO 3385 ENGLISH OPERATION MANUAL CERTIFICATE OF QUALITY QUANTITY: 1 Learn More

T-8260 ALBRECHT BAUMER IS-M, 40 METERS PER MINUTE, CUT HEIGHT 1300mm, YEAR 1987 MAKE: ALBRECHT BAUMER MODEL: IS-M SPEED: 0 TO 40 METERS PER MINUTE CUTTING HEIGHT: 1300mm KNIFE MEASUREMENTS: 10 x 0.45 x 10350mm POWER SUPPLY: 380 VOLTS, 3-PHASE, 50 Hz POWER REQUIREMENT: 4 KW YEAR: 1987 RIGHT TABLE: 2435mm BUN WIDTH (RIGHT TABLE): 2200mm BUN LENGTH: 2580mm LEFT TABLE: 2435mm BUN WIDTH (LEFT TABLE): 2200mm BUN LENGTH: 2580mm) QUANTITY: 1 Learn More

YY-1181 WEIMA SINGLE SHAFT SHREDDER YEAR OF CONSTRUCTION: 2013 OPERATING VOLTAGE: 460 V, 3 PH, 60Hz HOURS IN SERVICE: 35,000 Learn More

J-3403 ALBRECHT BAUMER BSA HORIZONTAL FOAM SPLITTING MACHINE (SKIVER) HORIZONTAL SPLITTING MACHINE WITH INTEGRATED DESTACKING SYSTEM PRESSURE ROLLER ADJUSTABLE IN HEIGHT BY MOTOR RETAINER ADJUSTMENT UNLOADING CONVEYOR DOWNSTREAM OF THE CUTTING UNIT 600 VOLTS, 3-PHASE, 60 Hz QUANTITY: 1 Learn More

REFERENCE NUMBER: L-4034

LONG SHEET FOAM PEELING MACHINE- 2300 mm X 60 METERS LONG – NEW

 

CUTTING WIDTH: 2300mm

CUTTING HEIGHT: 1300mm (51 inches) (beginning bun height)

CUTTING SPEED: 0 TO 60 METERS PER MINUTE

CUTTING THICKNESS: 2 TO 60mm

Learn More

REFERENCE NUMBER: R-7121
SOFTWARE: TOUCH SCREEN AND COMPUTER OPERATED
CAPACITY: 5 kN
STANDARDS: ASTMD3575, ASTMD3574
SPEED UP TO 40 INCHES PER MIN 

INCLUDES:
TEST A DENSITY TEST, 1% PRECISION, 200G (ELECTRIC BALANCE)
TEST D CONSTANT COMPRESSION TEST
QUANTITY: 1 

Learn More