REFERENCE NUMBER: T-6925
KARL MAYER FRACTIONAL WARPER AND KARL MAYER ROTAL SIZING MACHINE, YEAR 2002
ITEM 001
KARL MAYER FRACTIONAL WARPER
MOD ZM-SP 2000/1250DNC
AIR PRESSURE 6 ATM
YEAR OF CONSTRUCTION 2002
CREEL MODEL GWSP780
NUMBER POSITION BOBBIN 780
DISTANCE EACH POSITION 335mm
DIAMETER BEAM 1250
WIDTH 2000
WORKED 2 SHIFT 5 DAYS A WEEK
DUST ASPIRATION ON WARPING UNIT
TYPE KM 711R44RD 90160L
POWER 15 KW
YEAR 2002
WARPING BEAM DIAMETER 1250 X 2000 WIDTH N24
ELECTRIC FORKLIFT ARMANNI FOR THE WARPING BEAM ELECTRIC CHARGER FOR FORKLIFT
ITEM 002
KARL MAYER ROTAL SIZING MACHINE
MOD ELC O TENS
YEAR OF CONSTRUCTION 2002
WIDTH 4000mm
MAX DIAMETER BEAM 1250
APPLICATION OF WAX OUTSIDE DRYING CILINDER
WORKED 1 SHIFT 5 DAYS X WEEK
1-SIZING BOX, 2 SET OF 2 SQUEEZING CYLINDERS STEAM CILINDER 8 WITH TEFLON 2 STAINLESS STEEL TOT 10 DIAMETER 800
WIDTH 2000mm
CREEL OF SIZING
16 BEAMS
WIDTH 2000mm
DIAMETER 1250
KITCHEN SIZING
MODEL MPD-PW/2000
YEAR 2002
CRANE TYPE 414
CAP. UP TO 1600KG
SIZING ASPIRATION ON DRYER STAINLESS STEEL
2 MOTOR ASPIRATION 11+7.5KW
DUST ASPIRATION ON THE ROLLING SYSTEM
SPECIAL FORKLIFT FOR FULL BEAM
MAX WIDTH OF BEAM 4000mm
MAX WEIGHT 2000KG
YEAR 2012
Learn More
T-9752 KARL MAYER CARBON MACHINES BIAXIAL AND MULTIAXIAL
PROPERTIES:
SINCE ALL FIBERS POINT IN ONE DIRECTION, THE SCRIM CAN BE IDEALLY DRAPED
GOOD SOAKABILITY WITH LITTLE RESIN CONSUMPTION
CAN BE DRAPED VERY WELL AROUND CURVES AND EDGES
EASY TO CUT
ELECTRICALLY CONDUCTIVE, INFUSIBLE
HIGH STRENGTH AND RIGIDITY DUE TO GRAPHITE-LIKE FIBER STRUCTURE
BIOCOMPATIBLE
TRANSPARENT TO X-RAYS
LOW SPECIFIC WEIGHT
IDEAL FOR SURFACE USE (LITTLE FIBER IMPRINTS)
IDEAL FOR PROCESSING WITH EPOXY RESIN!
TEXTILE SEMI-FINISHED PRODUCTS MADE OF PRE-SPREAD AND PLANE-PARALLEL LAID FIBERS FORM THE GROUP OF UNIDIRECTIONAL FABRICS. THE FIBERS ARE USUALLY LAID AT 0°, MORE RARELY AT 90°. BY LAYING THE UD FABRICS ALONG THE LINES OF FORCE ACTING IN THE COMPONENT, THE LIGHTWEIGHT POTENTIAL OF THE CARBON FIBER IS OPTIMALLY EXPLOITED.
UD FABRICS CONSIST OF ONE OR MORE SUPERIMPOSED FIBER LAYERS FIXED WITH AN EPOXY-COMPATIBLE BINDER THREAD. THE SPECIAL SPREADING TECHNIQUE PRODUCES FABRICS WITH HIGH FIBER PARALLELISM, WITHOUT KNOTS AND FIBER TWIST. SPREAD FIBERS ABSORB THE RESIN BETTER, RESULTING IN HIGHEST LAMINATE STRENGTHS.
QUANTITY: 3 LINES
Learn More
TT-6930 NSC WORSTED/SEMI WORSTED RINGSPINNING FRAME LINKED WITH KARL MAYER WINDER, YEAR 1990TT-6930 NSC WORSTED/SEMI WORSTED RINGSPINNING FRAME LINKED WITH KARL MAYER WINDER, YEAR 1990 QUANTITY: 1 Learn More
TT-1246 KARL MAYER - ROTAL SIZING MACHINE AND FRACTIONAL WARPER, WIDTH 2000mm TO 4000mm, YEAR 2002TT-1246 KARL MAYER - ROTAL SIZING MACHINE AND FRACTIONAL WARPER, WIDTH 2000mm TO 4000mm, YEAR 2002 ITEM 001 KARL MAYER - ROTAL SIZING MACHINE QUANTITY: 1 ITEM 002 KARL MAYER FRACTIONAL WARPER QUANTITY: 1 Learn More
KARL MAYER FRACTIONAL WARPER AND KARL MAYER ROTAL SIZING MACHINE, YEAR 2002REFERENCE NUMBER: T-6925 KARL MAYER FRACTIONAL WARPER AND KARL MAYER ROTAL SIZING MACHINE, YEAR 2002 ITEM 001 KARL MAYER FRACTIONAL WARPER MOD ZM-SP 2000/1250DNC AIR PRESSURE 6 ATM YEAR OF CONSTRUCTION 2002 CREEL MODEL GWSP780 NUMBER POSITION BOBBIN 780 DISTANCE EACH POSITION 335mm DIAMETER BEAM 1250 WIDTH 2000 WORKED 2 SHIFT 5 DAYS A WEEK DUST ASPIRATION ON WARPING UNIT TYPE KM 711R44RD 90160L POWER 15 KW YEAR 2002 WARPING BEAM DIAMETER 1250 X 2000 WIDTH N24 ELECTRIC FORKLIFT ARMANNI FOR THE WARPING BEAM ELECTRIC CHARGER FOR FORKLIFT ITEM 002 KARL MAYER ROTAL SIZING MACHINE MOD ELC O TENS YEAR OF CONSTRUCTION 2002 WIDTH 4000mm MAX DIAMETER BEAM 1250 APPLICATION OF WAX OUTSIDE DRYING CILINDER WORKED 1 SHIFT 5 DAYS X WEEK 1-SIZING BOX, 2 SET OF 2 SQUEEZING CYLINDERS STEAM CILINDER 8 WITH TEFLON 2 STAINLESS STEEL TOT 10 DIAMETER 800 WIDTH 2000mm CREEL OF SIZING 16 BEAMS WIDTH 2000mm DIAMETER 1250 KITCHEN SIZING MODEL MPD-PW/2000 YEAR 2002 CRANE TYPE 414 CAP. UP TO 1600KG SIZING ASPIRATION ON DRYER STAINLESS STEEL 2 MOTOR ASPIRATION 11+7.5KW DUST ASPIRATION ON THE ROLLING SYSTEM SPECIAL FORKLIFT FOR FULL BEAM MAX WIDTH OF BEAM 4000mm MAX WEIGHT 2000KG YEAR 2012 Learn More
C-1198 SINGLE KNIT TEXTILE EQUIPMENT, YEAR 1989 TO 1996, CAMSREFERENCE NUMBER: C-1198 SINGLE KNIT TEXTILE EQUIPMENT, YEAR 1989 TO 1996, CAMS QUANTITY AVAILABLE: 1 Learn More
TT-5319 KARL MAYER BAND O-MATIC SECTIONAL WARPER, WIDTH 3600mm, YEAR 1998TT-5319 KARL MAYER BAND O-MATIC SECTIONAL WARPER, WIDTH 3600mm, YEAR 1998 MODEL: BAND O MATIC WIDTH 3600mm QUANTITY: 1 Learn More
T-9752 KARL MAYER CARBON MACHINES BIAXIAL AND MULTIAXIALT-9752 KARL MAYER CARBON MACHINES BIAXIAL AND MULTIAXIAL PROPERTIES: SINCE ALL FIBERS POINT IN ONE DIRECTION, THE SCRIM CAN BE IDEALLY DRAPED GOOD SOAKABILITY WITH LITTLE RESIN CONSUMPTION CAN BE DRAPED VERY WELL AROUND CURVES AND EDGES EASY TO CUT ELECTRICALLY CONDUCTIVE, INFUSIBLE HIGH STRENGTH AND RIGIDITY DUE TO GRAPHITE-LIKE FIBER STRUCTURE BIOCOMPATIBLE TRANSPARENT TO X-RAYS LOW SPECIFIC WEIGHT IDEAL FOR SURFACE USE (LITTLE FIBER IMPRINTS) IDEAL FOR PROCESSING WITH EPOXY RESIN! TEXTILE SEMI-FINISHED PRODUCTS MADE OF PRE-SPREAD AND PLANE-PARALLEL LAID FIBERS FORM THE GROUP OF UNIDIRECTIONAL FABRICS. THE FIBERS ARE USUALLY LAID AT 0°, MORE RARELY AT 90°. BY LAYING THE UD FABRICS ALONG THE LINES OF FORCE ACTING IN THE COMPONENT, THE LIGHTWEIGHT POTENTIAL OF THE CARBON FIBER IS OPTIMALLY EXPLOITED. UD FABRICS CONSIST OF ONE OR MORE SUPERIMPOSED FIBER LAYERS FIXED WITH AN EPOXY-COMPATIBLE BINDER THREAD. THE SPECIAL SPREADING TECHNIQUE PRODUCES FABRICS WITH HIGH FIBER PARALLELISM, WITHOUT KNOTS AND FIBER TWIST. SPREAD FIBERS ABSORB THE RESIN BETTER, RESULTING IN HIGHEST LAMINATE STRENGTHS. QUANTITY: 3 LINES Learn More