Search results for: 'ove'

REFERENCE NUMBER: C-2478 AIRLAY LINE WITH THERMOBONDING OVEN CORMATEX / SICAM, WIDTH 1300mm, YEAR 2010 TO 2011 SPECIFICATIONS: AIRLAY LINE WITH THERMOBONDING OVEN CORMATEX / SICAM WORKING WIDTH 1300mm YEAR OF CONSTRUCTION 2010 to 2011. THE AIRLAY LINE IS CONSISTING OF THE FOLLOWING COMPONENTS: BALE OPENER WITH SCALE TO MEASURE THE WEIGHT. CONVEYOR BELT. OPENER. AIRLAY UNIT. CONVEYOR BELT. THERMOBONDING OVEN. EDGE TRIM UNIT. PANEL CUTTER, FULLY AUTOMATIC. LOADING DEVICE TO LOAD READY MADE PANELS ONTO A PALETTE. THE THERMOBONDING OVEN IS MADE BY SICAM AND IS GAS HEATED. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: J-2912 SANTEX THERMOBONDING OVEN FOR HIGH DENSITY NONWOVENS, WORKING WIDTH 2600mm -CURRENTLY PROCESSING VIRGIN AND RECYCLED PET MAKE: SANTEX FOR PROCESSING HIGH DENSITY NONWOVENS FOR AUTOMOTIVE INDUSTRY, SOUND ABSORBENT MATERIALS, BEDDING AND FURNITURE WADDING YEAR: 1996 (PERMANENTLY OVERHAULED SO IN GOOD CONDITION) WORKING WIDTH: 2500mm (WEB WIDTH) CAPACITY: 100 TO 4000 gr/m2 WITH MODIFICATIONS TO ALLOW PROCESSING OF 4000 gr/m2 TO 25mm HEIGHT, INLET HEIGHT 5 TO 100mm WITH DOUBLE COMPRESSION GLASS-FIBER BELT GAS HEATED, SINGLE BURNER COOLING ZONE FLOORSPACE REQUIRED (FOR FULLY ERECTED OVEN) APPROXIMATE LENGTH: 9000mm + 3000mm INTAKE TRANSPORT BAND WIDTH: 5500mm HEIGHT: 3500mm + SPACE FOR FANS AND PIPING HEATING CHAMBER LENGTH: APPROXIMATELY 5000mm BURNER BTU (OR KILOCALORIES): INFORMATION COMING SOON IT IS POSSIBLE TO FEED THE OVEN WITH THE WEB WIDTH OF 2600mm, WHICH WILL ALLOW FOR THE TRIMMED WIDTH OF 2500mm AND TAKING OUT TWO PANELS EACH OF 1220mm FROM THIS STATUS: CURRENTLY RUNNING AND POSSIBLE TO SEE UNTIL END OF JUNE, 2020 QUANTITY: 1 Learn More

L-6683 DOUBLE BELT COMPRESSION THERMOBONDING OVEN SYSTEM 6000mm X 3300mm WIDE

INCLUDING:

THERMOBONDING OVEN
- DOUBLE COMPRESSION CONVEYORS SYSTEM SINGLE PASS
- DOUBLE BELT SOFT & HARD WADDING OVEN (6000mm LONG)
WORKING WIDTH: 3300mm
LENGTH OF HEATING CHAMBER: 6000mm
PANELS ARE 100mm THICK
TEMPERATURE INSIDE: UP TO 220 C
GAS BURNER 25 CUBIC METER PER HOUR DEPENDING ON MATERIAL THICKNESS
TWO GAS BURNERS ONE ON EACH SIDE 80 START AND 25 RUN CBM/H WITH MAINLINE 2 INCH
REDUCED TO 1” AT BURNER, PRESSURE 10 TO 15 KPascal
TWO HOT AIR FANS 22 KW EACH
ONE EXHAUST FAN 5.5 KW
WORKING SPEED: 1 TO 8 METERS PER MINUTE
DOUBLE TEFLON BELT WITH SINGLE PASS, WEAVE IS 2mm X 2mm
SUCTION HOOD AT THE ENTRANCE
THICKNESS OF FINAL PRODUCT 20 TO 150mm DEPENDING

COOLING UNIT
- FOUR COOLING PRESS ROLLERS 200mm diameter , 10mm shell thickness, with chiller
12,000 watt output power , input power 5700 watt , capacity 65 liter per minute
WORKING WIDTH: 3300mm
- LENGTHWISE CUTTER – 7 KNIVES ,pneumatically activated , BLADE DIAMETER 650mm
-SINGLE MOTOR
- MOVABLE SIDEWAYS
- CROSS CUTTER 2.2 KW MOTOR . UP TO 4 CUTS PER MINUTE
MAXIMUM LENGTH 2000mm
WORKING WIDTH: 2800mm
PVC CONVEYOR AT THE EXIT

ELECTRICAL CONTROL SYSTEM
-ELECTRICAL CABINET UL COMPONENTS

QUANTITY: 1

Learn More

REFERENCE NUMBER: T-6868 NEEDLE PUNCH LINE, EXIT WIDTH 2200/2500mm, CAPACITY 400 KGS, OVERHAULED AND UPDATED 2012 AND 2015 NEEDLE PUNCH LINE EXIT WIDTH 2200/2500mm OVERHAULED AND UPDATED IN 2012/2015 TECHNOLOGY CONTROL BY S7 DESIGNED AND USED FOR NATURAL FIBRES, GLASS FIBRES, RECYCLED FIBRES 100% OR MIXED WITH PP FOR BASIC MATERIALS OF THE AUTOMOTIVE INDUSTRY CAPACITY: 400 KGS ITEM 001 2 BALE OPENER BRAND TEMAFA WORKING WIDTH: 1400mm WOODEN LATICE BELTS WOODEN TRANSPORT LATTICE VERY GOOD CONDITION INDIVIDUAL CONTROL OF OPENING AND MIXING ITEM 002 WILLOW BRAND TEMAFA 4 PAIRS STRIPPING AND WORKING ROLLERS WORKING WIDTH: 1400mm WITH VENTILATOR AND PIPE SYSTEM TO CHUTE FEED AND HOPPER FEEDER ITEM 003 CHUTE FEED BRAND TEMAFA WORKING WIDTH: 2700mm CONTROL OF FILLING HEIGHT BY ULTRASOUND SENSORS ITEM 004 HOPPER FEEDER BRAND OCTIR (RSP) GROUND BELT BY WOODEN LATTICE AND DRIVEN BY SEPARATE DRIVE VIA ECCENTRIC VIBRATION WALL MOBILE FRON WALL ITEM 005 CARDING MACHINE WORKING WIDTH: 2500mm 5 PAIRD STRIPPER AND WORKER INSTALLED 1 PAIR STRIPPER/WORKER SEPARATE DELIVERY INDIVIDUAL DRIVE SYSTEMS RIGID CARD CLOTHING MAIN DRUM 1600mm DIAMETER DOFFER DRUM 1200mm AND FLY COMB ITEM 006 CROSS LAPPER WEB FEEDING BY TRANSILON-BELTS EXIT BELT AS WOODEN LATTICE BELT ITEM 007 PRE-NEEDLE MACHINE BRAND DILO MODI DVM25 WORKING WIDTH: 2500mm ALL BELT SYSTEMS USE WOODEN LATTICE BELTS 1 NEEDLE BOARD NEEDLING FROM TOP TO BOTTOM ITEM 008 NEEDLE MACHINE BRAND ASSELIN WORKING WIDTH: 2200mm 4 NEEDLE BAR MACHINE (2 TOP/2 BOTTOM) ALTERNATING AND SIMULTANEOUS WORKING METHODS BY MODIFICATION OF DRIVING BELT WAYS PULL-OUT ROLLERS AT EXIT STROKE HEIGHT 40mm ITEM 009 ROLLING MACHINE 3 LONGITUDINAL CUTTER (TOP AND BOTTOM DRIVEN) 1 CROSS CUTTER CONTROL OF THE LINE: SEPARATE SYSTEM FOR BALE OPENING AND MIXING S7 CONTROL FOR COMPLETE LINE UPR TO DATE LEVEL, AIRCONDITIONED, CONTROL CABINETS CLOSE TO MACHINE OR SEPARATE MACHINES ARE IN VERY GOOD AND UPDATED CONDITION Learn More

R-7391 BEMATIC BOMBI NONWOVEN CARDLINE AND OVEN, 2500mm,  YEAR 2005

BRAND BEMATIC
MODEL BOMBI
YEAR 2005
STATUS AVAILABLE
BEMATIC - BOMBI NONWOVEN
2 BALE HOLES, 1 OPENING ROLL, 1 OPENER
1 CARD HERGETH 2500mm, 1.5 PHASES
1 CROSS TAPPER 2500mm
1 BOMBI OVEN, 3 LAYERS, 10 M LONG, 2600mm WIDTH
3 WEISHAUPT BURNERS
1CUTTING MACHINE, 4 HORIZONTAL KNIVES
1 ROLLING MACHINE
1 SCALE
1 PACKING MACHINE THE LINE IS IN EXCELLENT TECHNICAL CONDITION

Learn More

V-1360 SANTEX THERMOBONDING COMPRESSION OVEN FOR NONWOVENS ON ROLL, 80 TO 400 G/M, YEAR 1986

WORKING WIDTH: 2500mm
ROLL FACE WIDTH: WORKING WIDTH + 50mm
MATERIAL FIBERS: NONWOVEN WEB OF POLYESTER OR DIFFERENT FIBERS MIXED WITH 10 TO 25% POLYESTER BI-COMPONENT BINDER FIBERS OR DIFFERENT BINDER FIBERS
MACHINE SPEED: 1 TO 20 M/MIN. (OTHERS UPON REQUEST)
COMPOSITION OVEN: 2 HEATING ZONES OF 2 M EACH + 1 COOLING SECTION

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-2505 AIR LAID LINE YEAR 2000 WIDTH 2400mm, CONTINUOUS OVEN FOR THERMOBONDING YEAR 2010 WIDTH 2600mm, LONGITUDINAL & TRANSVESAL CUTTER YEAR 2000 WIDTH 2500mm SPECIFICATIONS: NO. 1 AIR-LAY LINE BY "LAROCHE" – FRANCE NO. 1 CONTINUOUS OVEN FOR THERMOBONDING OF NONWOVENS BY "SICAM" - ITALY NO. 1 LONGITUDINAL AND TRANSVERSAL CUTTER BY "AUTOMATEX" - ITALY QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-2479 NONWOVEN LINE, WIDTH 2500mm, CROSS LAPPER WIDTH 6000mm, GAS OVEN 3400mm SPECIFICATIONS: NONWOVEN LINE THE LINE IS CONSISTING OF: 1 PC. CARDING MACHINE, 2500 MM WORKING WIDTH. 1 PC. CROSS LAPPER HERGETH, 6000 MM WORKING WIDTH. 1 PC. GAS HEATED 3-FLOOR OVEN MARIO BOMBI, 3400 MM WIDTH. QUANTITY AVAILABLE: 1 Learn More

TOMES THERMOBONDING OVEN
YEAR: 1995
WORKING WIDTH: 3100mm
SINGLE BELT
3 ZONES
COOLING SECTION

QUANTITY: 1

Learn More

INDEX 1. Technical specification pag.2 2. Line composition pag.3 3. Machines description pag.4 4. Total price of the turn-key plant pag.25 5. Sale terms pag.26 6. Payment terms pag.28 7. General selling terms and conditions pag.29 Learn More