Search results for: 'mach 3'

REFERENCE NUMBER: L-1824
MACHINE SIZE: 4500 X 1200 X 2250mm
QUANTITY: 1

REFERENCE NUMBER: L-1723
MAXIMUM FOAM WIDTH: 1800mm
QUANTITY: 1

REFERENCE NUMBER: L-1502
MODEL: UE2410
QUANTITY: 1

REFERENCE NUMBER: L-1427

SCREW FEED 6FT
PART #: 99030A276

BRONZE NUT – 2 PIECES
PART #: 95072A361

MOUNTING FLANGE – 2 PIECES
PART #: 95082A644

¾ INCH SCREW FEED 6FT
PART #: 99030A275

BRONZE NUT – 2 PIECES
PART #: 59072A351

MOUNTING FLANGE – 2 PIECES
PART #: 325895082A643

CONVEYOR BELT 45FT
PART #: 5999K5

FLANGE MOUNT BEARINGS – 16 PIECES
PART #: 5968K75

PILLOW BLOCK BEARINGS – 4 PIECES
PART #: 7728756

CHAIN – 50 FT
PART #: 6261K173

SPROKETS – 10 PIECES
PART #: 6733K146


AIR CYLINDER
PART #: 6498K662

AIR CYLINDER
PART #: 6498K232

1 X 2 TUBING – 250 FT
PART #: N/A

2 3/8” FLAT STEEL – 60 FEET
PART #: N/A

SHEET STEEL – 4FT X 8FT X ¼” – 2 PIECES
PART #: N/A

SHEET STEEL – 18 GAUGE – 4FT X 8FT – 5 PIECES
PART #: N/A

1 5/8 COLD ROLL SOLID – 40FT
PART #: N/A

1 INCH COLD ROLL SOLID – 20FT
PART #: N/A

3 INCH COLD ROLL SOLID
PART #: N/A

R-1170 DELL’ ORCO VILLANI RAG TEARING LINE + BALE PRESS, YEAR 1989 TO 1999

DETAILS:
DELL’ ORCA VILLANI RAG TEARING LINE + BALLING MACHINE
COMPOSED BY:
ITEM 001
DELL’ ORCA VILLANI CUTTERS
YEAR: 1989
QUANTITY: 2

ITEM 002
DELL’ ORCA VILLANI MIXING ROOMS + BIN EMPTIER
TYPE: FA/3030/T
QUANTITY: 2

ITEM 003
DELL’ ORCA VILLANI VOLUMATIC FEEDER
MODEL: CARICATORE
TYPE: CS/1600
YEAR: 1999
QUANTITY: 1

ITEM 004
DELL’ ORCA VILLANI RAG TEARING MACHINE
4 CYLINDERS
YEAR: 1999
WIDTH: 1500mm
EACH DRUM MODEL: M/1500
TYPE: SFILACCIATRICE
QUANTITY: 1

ITEM 005
DELL’ ORCA VILLANI VOLUMATIC FEEDER
MODEL: CARICATORE
TYPE: CS/1600
YEAR: 1989
QUANTITY: 1

ITEM 006
DELL’ ORCA VILLANI RAG TEARING MACHINE
3 CYLINDERS
YEAR: 1989
WIDTH: 1500mm
EACH DRUM MODEL: M/1500
TYPE: SFILACCIATRICE
QUANTITY: 1

ITEM 007
DELL’ ORCA VILLANI BALE PRESS
TYPE: RA/100
WITH 2 CHAMBERS (ROTATIVE SYSTEM)
WITH WEIGHING DEVICE (SCALE FOR KG OF EACH BALE)
QUANTITY: 1

ITEM 008
DELL’ ORCA VILLANI DUST COLLECTING INSTALLATION
WITH BAGS TO COLLECT THE DUST
QUANTITY: 1

QUANTITY: 1 LINE

C-3796 MARGASA 4-DRUM TEARING LINE, WORKING WIDTH 900mm TO 1500mm, YEAR 2012

MARGASA 4-DRUM TEARING LINE
YEAR: 2012
WORKING WIDTH: 1500mm

CONSISTING OF:

MARGASA CMT-900 ROTARY CUTTERS
WORKING WIDTH: 900mm
QUANTITY: 2

METAL DETECTOR
QUANTITY: 1

PNEUMATIC TRANSPORT
QUANTITY: 1

MAGNETIC DUCT
QUANTITY: 1

BIG STORAGE BOX
QUANTITY: 1

FEEDING
QUANTITY: 1

MARGASA MASTER MCM-1500-DD 4-DRUM TEARING MACHINE
WORKING WIDTH: 1500mm
DRUM DIAMETER: 1000mm
WITH:
PRESSING ROLLER
WITH A LARGE DIAMETER TO COMPACT THE MATERIAL
BEFORE THE FIRST FEED ROLLER OF THE TEARING MACHINE
BEATERS THAT ELIMINATE THE FOREIGN SUBSTANCES
SUCH AS PLASTICS
WOODS
AND BUTTONS
THAT DUE TO WEIGHT HAVE FALLEN ON THE RETURN APRON
RETURN LATTICE
WITH MOTOR-REDUCER OF 1.5 KW
THAT DRIVES THE BIT RETURN LATTICES
OF THE MATERIAL TO BE RECYCLED
QUANTITY: 1

TAKES 4 CONTAINERS TO LOAD

QUANTITY: 1 LINE

H-1305 BATT FEEDING SYSTEM - WORKING WIDTH 3000mm

WORKING WIDTH: 3000mm
CONTROL SYSTEM INCLUDED

COMPOSITION OF THE MACHINE:
- LOWER PVC INCLINED CONVEYOR BELT FOR THE TRANSPORT OF THE WEB FROM THE CROSS LAPPER TO THE ENTRANCE OF THE NEEDLE LOOM.
- UPPER PVC COMPRESSION BELT FOR THE PRE-COMPRESSION OF THE WEB BEFORE ENTERING THE FEEDING ROLLS.
- LOWER PVC CONVEYOR AND UPPER PVC BELT DRIVEN BY ONE GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- PAIR OF FEEDING ROLLS WITH PLASTIC FINGERS TO GUIDE THE COMPRESSED WEB CLOSE TO FIRST NEEDLE ZONE OF THE PRE-NEEDLE LOOM. ROLLER PAIR DRIVEN BY GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- BATT FEEDING SYSTEM INSTALLED ON RAIL SYSTEM AND EASY REMOVABLE FOR MAINTENANCE OF THE NEEDLE LOOM

TECHNICAL DATA:
ELECTRICAL INFORMATION:
ELECTRIC: MAIN VOLTAGE 400 V, 50 HZ, 3 PH.
CONTROL VOLTAGE: DC - 24 V / AC - 230 V
OTHER INFORMATION:
AIR PRESSURE (CONSTANT): MIN. 6 BAR (AT SITE)
OPERATOR SIDE LEFT OR RIGHT (IN WEB RUNNING DIRECTION)
LACQUER COATING:
MAIN COLOR OF THE MACHINES: RAL 7035 (LIGHT GREY)
CONTROL CABINET AND CONTROL DESK RAL 7035 (LIGHT GREY)
LABELING: ENGLISH
TECHNICAL DOCUMENTATION: ONE TIME ON CD-ROM (FURTHER SETS AVAILABLE AT ADDITIONAL COST)
LANGUAGE FOR OPERATING INSTRUCTIONS: ENGLISH
LANGUAGE FOR FURTHER DOCUMENTATION (SPARE PART LISTS, WIRING DIAGRAM, ETC): ENGLISH

ENVIRONMENTAL CONDITIONS:
INSTALLATION HEIGHT ABOVE SEA LEVEL: LESS THAN OR EQUAL TO 1,000 METERS
TEMPERATURE: 24° C (±2° C)
RELATIVE HUMIDITY: 65% (±5%)
ABSOLUTE WATER CONTENT: 9 TO 12 G/KG DRY AIR
NOTE: PLEASE MAKE SURE THAT THE TEMPERATURE INSIDE THE CONTROL CABINET DOES NOT EXCEED 450 CENTIGRADE. IN CASE OF EXCESSIVE ROOM TEMPERATURES WE RECOMMEND AN AIR-CONDITIONING SYSTEM FOR THE CONTROL CABINETS TO AVOID MALFUNCTION OF ELECTRICAL COMPONENTS

QUANTITY: 1

REFERENCE NUMBER: M-3290

FEHRER NL42 NEEDLE LOOM YEAR 1985 WIDTH 2700mm – QUATTRO PUNCH

MAKE: FEHRER

TYPE: NL42

YEAR: 1985

WORKING WIDTH 2700mm

QUATTRO PUNCH

TWO BOARDS UP AND TWO BOARDS DOWN

NEEDLES: 4 X 7500 N/M

WEIGHT: CA. 22TO

DIMENSIONS: 3900mm X 2300mm X 2600mm

COMPLETE WITH CONTROL SYSTEM

COMPLETE WITH FEEDING SYSTEM

DC MAIN DRIVE

GOOD CONDITION

OVERHAULED 2 GEARBOXES

MACHINE IS STILL IN OPERATION

QUANTITY: 1

P-3457 THIBEAU CARD CA11-R3P5PP (LL), WIDTH 3500mm, YEAR 1997

THIBEAU
MODEL: CA 11
TYPE: R3P5PP (LL)
CARDING MACHINE
YEAR: 1997
WORKING WIDTH: 3500mm
DELIVERY WEIGHT 26 to 40 GR/SQM
DELIVERY SPEED UP TO 90m/min
PRODUCTION CAPACITY APPROXIMATELY 700 KILOGRAMS PER HOUR
WEIGHING SYSTEM ACE
WIDTH: 3500mm
TRUTZSCHLER
EXACTAFEED FBK
WIDTH: 3500mm
THE MACHINES ARE IN VERY GOOD CONDITION BECAUSE THEY HAVE BEEN USED FOR SOME MONTHS ONLY
NOW THEY ARE DISMANTLED AND STORED IN DRY WARE HOUSE
THE CARDING MACHINE IS PACKED INTO WOODEN BOXES

QUANTITY: 1

C-4294 AUTOMATEX CROSS LAPPER, SPEED 65 M/MIN, WIDTH EXIT 3500mm, YEAR 2006

CROSS LAPPER
BRAND: AUTOMATEX
MODEL: FA 3000 TC
YEAR: 2006
YEAR COMPLETE RENEWED: 2010 FROM COMPANY AUTOMATEX
SPEED: 65 M/MIN
WIDTH ENTRANCE: 3000mm
WIDTH EXIT: 3500mm
IN THIS MACHINERY THE TIMING BELTS
AND CONVEYOR BELTS ARE IN GOOD CONDITIONS
WE WILL DISMANTLED PERSONALLY
AND THERE WILL BE ALSO ALL THE ELECTRICAL CABLES

QUANTITY: 1