Search results for: 'a-2'

REFERENCE NUMBER: T-6878 THIBEAU/AUTOMATEX/TECNOTEX/FOR DOFFER CARDS AND CROSS-LAPPERS ITEM 001 THIBEAU SINGLE DOFFER CARD YEAR: 1982 WORKING WIDTH: 2500mm AVANTRAIN + 1 SWIFT UP TO 200 KG/H QUANTITY: 1 + AUTOMATEX CROSS-LAPPER YEAR: 1982 INPUT: 2500mm OUTPUT: 5000mm QUANTITY: 1 ITEM 002 TECNOTEX DOUBLE DOFFER CARD YEAR: 2001 WORKING WIDTH: 3500mm QUANTITY: 1 + AUTOMATEX CROSS-LAPPER YEAR: 2001 INPUT: 3500mm OUTPUT: 4000mm QUANTITY: 1 ITEM 003 TECNOTEX DOUBLE DOFFER CARD YEAR: 2000 WORKING WIDTH: 3500mm AVANTRAIN + 2 SWIFTS QUANTITY: 1 + AUTOMATEX FA5000/TC CROSS-LAPPER YEAR: 2000 INPUT: 3600mm OUTPUT: 4500mm UP TO 80 M/MIN QUANTITY: 1 ITEM 004 FOR DOUBLE DOFFER CARD YEAR: 1990S WORKING WIDTH: 2500mm AVANTRAIN + 2 SWIFTS UP TO 500 KG/H + FOR CROSS-LAPPER YEAR: 1990S INPUT: 2500mm OUTPUT: 3800mm QUANTITY: 1 Learn More

REFERENCE NUMBER: Y-2075 SPINNBAU DOUBLE DOFFER NON-WOVEN CARD 2500mm RECONDITIONED CARD SPECIFICATION: 2500mm WORKING WIDTH DISH FEEF ARRANGEMENT WITH FEED ROLLER 159mm 1 LICKER-IN 292mm 1 BREAST 412mm WITH 1 WORKER 213mm AN 1 STRIPPER 105mm 1 TRANSFER 412mm 1 SWIFT 1500mm WITH 6 WORKERS 213mm AND 6 STRIPPERS 105mm 1 TOP DOFFER 500mm 1 BOTTOM DOFFER 550mm 2 BOTTOM RANDOMISER ROLLERS 292mm 2 BOTTOM RANDOMISER ROLLERS 292mm TOP DOFFER DOFFING ROLLER SYSTEM 2 ROLLER 105mm AND 105mm CARD MOUNTED ON RAILS WITH PLATFORM SPINNBAU GUARDING SYSTEM FITTED WITH THE FOLLOWING NEW EQUIPMENT: NEW HIGH CAPACITY HOPPER FEEDER WITH CHUTE DELIVERY ELECTRONIC WEIGHT SYSTEM NEW AC INVERTER DRIVES SYSTEM WITH TOUCH SCREEN CONTROL NEW AC GEARED MOTOR UNITS NEW DRIVE BELTS AS REQUIRED NEW SAFETY CIRCUIT, E-STOPS AND GUARD INTERLOCKS HOPPER FEEDER WITH CHUTE DELIVERY 2500mm WIDE 1500mm FEEDER CONVEYOR PVC WITH WOOD LATHS WITH GEARED MOTOR DRIVE INCLINED SPIKED LATTICE PVC WITH WOOD LATHS WITH GEARED MOTOR DRIVE LEVELLING ROLLER WITH GEARED MOTOR DRIVE STRIPPING ROLLER WITH GEARED MOTOR DRIVE VOLUMETRIC CHUTE DELIVERY VIBRATING BACKPLATE WITH GEARED MOTOR DRIVE CHUTE THICKNESS ADJUSTABLE DELIVERY ROLLERS TO BE DRIVEN FROM CARD FEED SHEET ELECTRICAL CONTROLS WITH VARIABLE SPEED DRIVE TO SPIKED LATTICE, OR STRIPPING ROLLERS AND VIBRATING BACKPLATE QUANTITY: 1 Learn More

REFERENCE NUMBER: Y-2072 SLITTING, REWINDING, CUTTING MACHINE TWO KINDS OF BLADES: UPPER SHAFT KNIFE AND LOWER SHAFT KNIFE DIAMETER OF UPPER SHAFT KNIFE: 110mm DIAMETER OF LOWER SHAFT KNIFE: 80mm PRODUCTION CAPACITY: 3000mm PER MINUTE MAXIMUM WORK WIDTH: 1200mm NUMBER OF BLADES: 12 PCS WHICH CAN CUT A VARIOUS WIDTH OF NON-WOVEN CLOTH WOKING SPEED: ADJUSTABLE SPEED MOTOR DIMENSION: L: 1450mm X W: 1100mm X H: 1400mm SIZE: 3600mm X 4500mm X 1850mm VOLTAGE: 220V, 60Hz WEIGHT: 420 KG QUANTITY: 1 Learn More

REFERENCE NUMBER: A-2491 PP MELTBLOWN NONWOVEN FABRIC PRODUCTION LINE, 1600 mm MACHINE TYPE: MELTBLOWN WORKING WIDTH: 1600 mm MATERIAL MFI: 1000 TO 1600 PP CHIP MATERIAL PRODUCTION SPEED: 0 TO 50 M/min EXTRUDER DIAMETER IN mm: 90 mm EXTRUDER MOTOR IN KW: 55 KW PRODUCT WEIGHT RANGE: 10 TO 80 GSM FIBER FINENESS: 2 TO 5 mm ELECTROSTATIC ELECTRET: 200 KVA ROOTS BLOWER: 110 KW CENTRIFUGAL FAN: 75 KW MAX OUTPUT: UP TO 1500 KG/24 HOURS DIMENSION: 6000 X 3000 X 3000 mm WEIGHT: 8 TONS POWER (TOTAL KW): 400 KW VOLTAGE: 220 VOLTS AND 50/60 Hz QUANTITY OF CONTAINERS NEEDED: 45 HC PRODUCTION TIME: 30 DAYS Learn More

REFERENCE NUMBER: A-2488 MELT BLOWN CLOTH PRODUCTION LINE 600mm SPECIFICATIONS: PLASTIC AUTOMATIC CHARGER • FEEDING CAPACITY: 200 KG / H • AIR PUMP POWER: 0.75 KW HOPPER PLASTIC DRYER • HOPPER CUBIC CAPACITY: 100 L • FEEDING CAPACITY: 50 KG • HEATING POWER: 3.7 KW • BLOWER POWER: 0.12 KW SJ55/30 SINGLE SCREW EXTRUDER • SCREW, BARREL: SCREW AND BARREL MATERIAL 38CRMOALA, NITRIDE • SCREW DIAMETER: 55 mm • SCREW L/D: 30:1 • MAIN MOTOR POWER: 15 KW SIEMENS STANDARD • MOTOR MAIN MOTOR SPEED ADJUSTMENT: 15 KW ABB INVERTER • BARREL HEATING: CASTING - HEATER WITH AIR COOLING • HEATING POWER: 2.8 KW X 4 ZONES • GEAR BOX: ZLYJ SERIES RIGID GEAR BOX • EXTRUSION CAPACITY: 15 TO 40 KG/H HYDRAULIC SCREEN CHANGER • MOTOR POWER: 1.1 KW • STRUCTURE: DOUBLE POSITION, PLATE TYPE • HEATERS: STAINLESS STEEL HEATING BAR METERING PUMP • MOTOR POWER: 2.2KW • CAPACITY: 30CC • SPEED CONTROL: • HEATERS: STAINLESS STEEL HEATING BAR T-DIE • STRUCTURE: T-DIE • MATERIAL OF MOULD: HIGH QUALITY ALLOYED STEEL, SURFACE CHROME PLATED • FLOW CHANNEL CHROME PLATED, POLISHED • SPECIFICATION OF PRODUCT: WIDTH 600 mm • AIR INCOME HOLES: 12 PCS, HIGH PRECISION TEMPERATURE CONTROL FORMING MACHINE • MOTOR POWER: 1.5 KW • SPEED CONTROL: INVERTER • SUCTION FAN: 5.5 KW ELECTROSTATIC ELECTRET DEVICE • INCLUDES ELECTROSTATIC GENERATOR, VOLTAGE REGULATOR, ELECTRET FRAME • APPLICATION: GENERATE ELECTROSTATIC CHARGE, INCREASES THE FILTERING EFFICIENCY • MOTOR POWER: 2.2 KW • BLADES: 4 PCS • HAULING SPEED CONTROL: ADOPTABB INVERTER COLIER • COILING SHAFT: 2 PCS • COMPACTION: BY PNEUMATIC CONTROL • COILING METHOD: BY SELF FRICTION SCREW AIR COMPRESSOR • MOTOR POWER: 37 KW • STRUCTURE: SCREW TYPE, LOW NOISY • PLC CONTROL AIR FILTER • CAPACITY: 7 M3/min • PRESSURE: 1.0 MPA • FILTRATION EFFICIENCY: 3 MICRON / 5 PPM AIR DRYER • CAPACITY: 6 NM3/min • PRESSURE: 1 MPA • POWER: 2 HP AIR TANK • VOLUME: 1000 L • PRESSURE: 1.05 MPA HOT AIR SYSTEM • HEATING POWER: 60 KW • HEATING TYPE: ELECTRIC HEATING • WITH HEAT INSULATION LAYER Learn More

REFERENCE NUMBER: A-2485 MELTBLOWN FABRIC PRODUCTION MACHINE, 1600 mm MACHINE TYPE: MELTBLOWN WORKING WIDTH: 1600 mm PRODUCTION SPEED: UP TO 2500 KG/24 HOURS EXTRUDER DIAMETER IN mm: 90 mm EXTRUDER MOTOR IN KW: 55 KW PRODUCT WEIGHT RANGE: 25 TO 30 GSM MAX OUTPUT: UP TO 2500 KG/24 HOURS DIMENSION: 14500 X 3200 X 4800 mm WEIGHT: 9.36 TONS POWER (TOTAL KW): 450 KW VOLTAGE: 220 VOLTS AND 50/60 Hz QUANTITY OF CONTAINERS NEEDED: 1 X 40; 1 X 20; PRODUCTION TIME: 50 DAYS Learn More

REFERENCE NUMBER: A-2484 MELTBLOWN FABRIC PRODUCTION MACHINE, 600 mm MACHINE TYPE: MELTBLOWN WORKING WIDTH: 600 mm PRODUCTION SPEED: 300 KG/24 HOURS EXTRUDER DIAMETER IN mm: 65mm EXTRUDER MOTOR IN KW: 18.5 KW PRODUCT WEIGHT RANGE:25 TO 30 GSM MAX OUTPUT: 350 KG/24HOURS DIMENSION: 7500 X 1800 X 2550 mm WEIGHT: 3.3 TONS POWER (TOTAL KW): 2.2 KW VOLTAGE: 220 VOLTS AND 50/60 Hz QUANTITY OF CONTAINERS NEEDED: 1 X 40 PRODUCTION TIME: 25 DAYS Learn More

REFERENCE NUMBER: T-6848 SPINNBAU CARDING LINE, YEAR 2013 BRAND: SPINNBAU SHORT DESCRIPTION: CARDING LINE YEAR: 2013 INSTALLED 2014 LIKE NEW, LITTLE RUN TIME 4 HOPPER TEMAFA BLEND LINE, 1600mm WIDE, 1 WITH CONDENSER FED FROM TRIM MACHINE CARDING WILLOW – 800mm WIDE FEED BELT AND 1200mm WIDE – TEMAFA TEMAFA MIXMASTER BLENDING BIN – 3000mm WIDE X 8000mm LONG X 4600mm HIGH (FILL HEIGHT 3000mm). 72 CUBIC METER CAPACITY. TEMAFA FINE OPENER – 2000mm WIDE WITH PINS 3000mm SPINNBAU CARD FEEDING UNIT – FEED TRUNK, VIBRATING CHUTE, WEIGHT BELT 708mm BREAST SECTION WITH 3 WORKERS AND STRIPPERS, 1500mm MAIN WITH 5 W/S AND (2) 708mm DOFFERS. 1 FOUNDATIONS AND PLATFORMS. DILO PROFILINE – BATT WEIGHT CONTROL SYSTEM MAHLO WEIGHT MEASURING UNIT – QUALISCAN CMS-12 DILO LAYER CROSSLAPPER – TYPE DLS 30/60 – 3000mm INFEED AND UP TO 6000mm LAYDOWN. MAX WEB HEIGHT 650mm. MAXIMUM SPEED 125M/MIN. SPINNBAU LAP DRAFTER TYPE VST 19 – MAX 6000mm WORKING WIDTH. 9 ROLLER PAIRS. LIFTING DEVICE TO ALLOW FOR 600mm CLEARANCE. 159mm ROLLER DIAMETER. INFEED HEIGHT 650 mm BRUCKNER THERMOBONDING OVEN – 5000mm OVEN WITH 3 HEATING AND 2 COOLING ZONE. MAGNETIC BELT. 3 NATURAL GAS MAXON BURNER. SLITTING – 9 POSITION BRUCKNER CRUSH CUTTER SLITTING HEADS. PNEUMATIC LIFTING. 450mm KNIFE DIAMETER CROSS CUTTER – ROTARY CUTTER STYLE WITH CLAMPING. CAPABLE OF 3 CUTS/MINUTES FOR MATERIALS UP TO 200mm THICK. WINDING – ASCENDING BATCH STYLE WINDER. MAX ROLL DIAMETER OF 1200mm. 3000mm DRIVEN FEED CONVEYOR. MANDREL GUIDANCE SYSTEM, MANUALLY ADJUSTABLE BRAKE SYSTEM FOR CONTROLLING TENSILE FORCE AND COMPACTION. TEMAFA FILTER HOUSE – TFS 50. MAX FLOW 50,000 CUBIC METER/H ELECTRICL INFO – 3 X 480V/60Hz. CONTROLS 110V AC/24 DC. SIEMENS PLC QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6840 AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE BRAND: AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE CONSISTING OF: BLEND LINE, 60” WIDE, 4 HOPPERS WITH 12 HEAVY DUTY EXTENDED APRONS & NEW ELECTRONIC WEIGHING SYSTEM (2016). ALL MACHINES COMPLETELY RECONDITIONED IN 2016. OMMI STACK RESERVE, AUTOMATIC COMBO 332, YEAR 2000 SPINNBAU CARD, 2500mm, DOUBLE DOFFER, YEAR 1995, REPORTED ~1500 TO 1800 PPH CAPACITY DEPENDING UPON PRODUCT. AUTOMATEX FA/3000 TC CROSSLAPPER, YEAR 1997, AC DRIVES. BATT DRAFTER, 12 ROLLS. AUTOMATEX PR-100/T PRE-NEEDLER, 60mm STROKE, YEAR 1997 DRAFTER, 5 ROLLS. AUTOMATEX AG 154/TB NEEDLE LOOM, QUAD PUNCH, 50mm STROKE, YEAR 1997 FOUR ROLL STRETCH. METAL DETECTOR. ENTEX TENTER WITH VERTICAL IR HEAT BANKS, YEAR 1997 WINDER, YEAR 1997 PERKINS 4 ROLL CALENDER, NO STEEL ROLLS OR HEAT SYSTEM INCLUDED BUT MIGHT BE NEGOTIATED. EHHARDT+LEIMER GUIDER MODEL SE 11062, YEAR 2013 ENTEC WINDER, YEAR 1997 FINISHED WIDTH REPORTED OF 210" BUT COULD GO WIDER. LINE RAN PRIMARILY GEOTEXTILE & BEDDING PRODUCTS FROM 4.5 TO 10 OZ/YD. QUANTITY: 1 Learn More

FOR NONWOVEN MATERIALS: SPUNBOND, MELTBLOW, SPUNLACE, AIRLAID, PPE, PS, PES, NYLON66, ARAMID ETC.
OIL ABSORBER, WATERPROOF, BREATHABLE COMPOSITES
TOTAL MATERIAL THICKNESS RANGE: 20gsm TO 55gsm

WORKING WIDTH: 1600mm
CAPACITY: 10 TO 100 METERS PER MINUTE
ONE PATTERN ROLLER
TITANIUM HORNS
ULTRASONIC SYSTEM 20 KHZ, 2000 WATTS (10 SETS)
PLC CONTROLS WITH TOUCH SCREEN
ELECTRICAL: 380 VOLTS, 3-PHASE, 28 KW
AIR: 6 BAR PER CM2 , 2 LITERS PER HOUR
OPTIONAL EXTRA PATTERN ROLLER AVAILABLE (PRICED SEPERATELY)
WITH CE CERTIFICATE, TOOL BOX, USER MANUAL

LEAD TIME: 110 DAYS

QUANTITY: 1

Learn More