Search results for: 'NEEDLE B'

REFERENCE NUMBER: M-1027 NEEDLE PUNCHING PLANT COMPLETE WITH 6 FEHRER NEEDLE LOOMS YEAR 1993 ARTIFICIAL LEATHER PRODUCING AND OTHER HIGH/EXTRA-HIGH DENSITY PRODUCING NONWOVEN NEEDLE PUNCHING LINE COMPLETE WITH 6 SETS FEHRER NEEDLE PUNCHING LOOMS YEAR: 1993 PLANT IS RUNNING CAN BE INSPECTED QUANTITY AVAILABLE: 1 Learn More

T-7943 DILO NEEDLE PUNCHING MACHINE – PRE AND FINISH NEEDLER, WIDTH 3600mm TO 4100mm, YEAR 1986 ITEM 001 DILO NEEDLE PUNCHING MACHINE - PRE NEEDLER, WIDTH 4100mm, YEAR 1986 CONDITION / STATUS: IN OPERATION QUANTITY: 1 ITEM 002 DILO NEEDLE PUNCHING MACHINE - FINISH NEEDLER, WIDTH 3600mm, YEAR 1986 CONDITION / STATUS: IN OPERATION QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6868 NEEDLE PUNCH LINE, EXIT WIDTH 2200/2500mm, CAPACITY 400 KGS, OVERHAULED AND UPDATED 2012 AND 2015 NEEDLE PUNCH LINE EXIT WIDTH 2200/2500mm OVERHAULED AND UPDATED IN 2012/2015 TECHNOLOGY CONTROL BY S7 DESIGNED AND USED FOR NATURAL FIBRES, GLASS FIBRES, RECYCLED FIBRES 100% OR MIXED WITH PP FOR BASIC MATERIALS OF THE AUTOMOTIVE INDUSTRY CAPACITY: 400 KGS ITEM 001 2 BALE OPENER BRAND TEMAFA WORKING WIDTH: 1400mm WOODEN LATICE BELTS WOODEN TRANSPORT LATTICE VERY GOOD CONDITION INDIVIDUAL CONTROL OF OPENING AND MIXING ITEM 002 WILLOW BRAND TEMAFA 4 PAIRS STRIPPING AND WORKING ROLLERS WORKING WIDTH: 1400mm WITH VENTILATOR AND PIPE SYSTEM TO CHUTE FEED AND HOPPER FEEDER ITEM 003 CHUTE FEED BRAND TEMAFA WORKING WIDTH: 2700mm CONTROL OF FILLING HEIGHT BY ULTRASOUND SENSORS ITEM 004 HOPPER FEEDER BRAND OCTIR (RSP) GROUND BELT BY WOODEN LATTICE AND DRIVEN BY SEPARATE DRIVE VIA ECCENTRIC VIBRATION WALL MOBILE FRON WALL ITEM 005 CARDING MACHINE WORKING WIDTH: 2500mm 5 PAIRD STRIPPER AND WORKER INSTALLED 1 PAIR STRIPPER/WORKER SEPARATE DELIVERY INDIVIDUAL DRIVE SYSTEMS RIGID CARD CLOTHING MAIN DRUM 1600mm DIAMETER DOFFER DRUM 1200mm AND FLY COMB ITEM 006 CROSS LAPPER WEB FEEDING BY TRANSILON-BELTS EXIT BELT AS WOODEN LATTICE BELT ITEM 007 PRE-NEEDLE MACHINE BRAND DILO MODI DVM25 WORKING WIDTH: 2500mm ALL BELT SYSTEMS USE WOODEN LATTICE BELTS 1 NEEDLE BOARD NEEDLING FROM TOP TO BOTTOM ITEM 008 NEEDLE MACHINE BRAND ASSELIN WORKING WIDTH: 2200mm 4 NEEDLE BAR MACHINE (2 TOP/2 BOTTOM) ALTERNATING AND SIMULTANEOUS WORKING METHODS BY MODIFICATION OF DRIVING BELT WAYS PULL-OUT ROLLERS AT EXIT STROKE HEIGHT 40mm ITEM 009 ROLLING MACHINE 3 LONGITUDINAL CUTTER (TOP AND BOTTOM DRIVEN) 1 CROSS CUTTER CONTROL OF THE LINE: SEPARATE SYSTEM FOR BALE OPENING AND MIXING S7 CONTROL FOR COMPLETE LINE UPR TO DATE LEVEL, AIRCONDITIONED, CONTROL CABINETS CLOSE TO MACHINE OR SEPARATE MACHINES ARE IN VERY GOOD AND UPDATED CONDITION Learn More

T-7951PRE AND FINISH – NEEDLER, WIDTH 2800mm TO 2900mm ITEM 001 PRE - NEEDLER QUANTITY: 1 ITEM 002 FINISH - NEEDLER QUANTITY: 1 Learn More

M-6064 NONWOVEN NEEDLE FELT PUNCH PRODUCTION LINE, WIDTH 3000mm TO 5500mm, YEAR 2000

OFFER 001
NONWOVEN NEEDLE FELT LINE
NEEDLE PUNCH PRODUCTION LINE
FINAL FABRIC WIDTH: MAXIMUM 5500mm
YEAR: END OF 2000
BONDING: MECHANICAL (NEEDLING)
CAPACITY: ± 960 KG/H FOR A 250 G/M2 PRODUCT ON 4M WIDTH

OFFER 002
TEMAFA FIBRE OPENING SYSTEM
BALE OPENER

OFFER 003
SPINNBAU CARD FEEDING UNIT

OFFER 004
SPINNBAU ONE CARDING MACHINE
WORKING WIDTH: 3000mm

OFFER 005
AUTEFA CROSSLAPPER
WORKING WIDTH: 3000mm
LAYERING WIDTH: 6500mm

OFFER 006
DILO DI-LOOM OD-II 60 NEEDLE LOOM

OFFER 007
OUG-II 60 NEEDLE LOOM

OFFER 008
ONE ACCUMULATOR

OFFER 009
ONE WINDING AND CUTTING DEVICE

OFFER 010
ONE TEMAFA WEB EGE OPENING

OFFER 011
ALL SUCTION EQUIPMENT

OFFER 012
FULL CONTROL DESK & CONTROL CABINETS

OFFER 013
ONE PROCESS CONTROL SYSTEM

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: M-4398 (101048QEU9RX) K STRUCTURING NEEDLE LOOM PUNCH MACHINE YEAR 1974 WIDTH 4880mm STRUCTURING NEEDLE LOOM PUNCH MACHINE DR. ERNST FEHRER AG TYPE NL 11 WORKING WIDTH 4880mm YEAR 1974 LAMELLA GAUGE 4.7mm THE CONTROLS AND ELECTRIC BOARDS ARE NOT INCLUDED BECAUSE THE MACHINE WAS CONTROLLED BY A CENTRAL CONTROL FOR THE ENTIRE LINE TOTALLY 2 OR 3 SETS OF NEEDLE BOARDS CAN BE SUPPLIED WITH THE MACHINE THE MACHINE WAS PURCHASED AS SECOND-HAND APPROXIMATELY 7 YEARS AGO AND WAS USED FOR MAKING CARPETS SINCE THEN AS PER OPINION OF THE PLANT TECHNICIAN, THE MAIN BEARING IN THE HOUSING SHOULD BE OKAY. THE MACHINE WAS PURCHASED FROM A MULTINATIONAL COMPANY 7 YEARS AGO AND WAS IN GREAT CONDITION WHEN THE USED MACHINE CHANGED OWNER THE TOTAL INSIDE WIDTH IS 5178mm THE WIDTH ON WHICH THE NEEDLE BOARDS ARE DRILLED WITH HOLES FOR THE NEEDLES IS 4920mm. SO THIS IS THE TOTAL MAXIMUM WIDTH ON WHICH THE MATERIAL WOULD BE NEEDLE PUNCHED. NEEDLE BOARDS INSIDE THE MACHINE: 4 BOARDS ON ONE LINE. NUMBER OF NEEDLES PER METER: ESTIMATED TO BE 5,000 NEEDLES/M, BUT NEEDS TO BE CHECKED. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1530 (660EUSJXX5) DILO DI-LOOP YEAR 1995 WIDTH 5500mm DILO STRUCTURING NEEDLE LOOM MAKE: DILO TYPE: DI-LOOP VS 55 WORKING WIDTH: 5.500mm Y.O.C.: 1995 QUANTITY AVAILABLE: 1 Learn More

MODEL: BG-450 NEEDLING SPEED: 0 TO 1000 RPM DOWN STROKE 60mm NEEDLE DENSITY: 5000 NEEDLES PER LINEAR METER PINHOLE DIAMETER: Ø1.83mm ACTUAL WIDTH OF NEEDLE PLATE: 4500mm STRIP PLATE AND SCREEN PLATE: ALL PINHOLES ARE BEVELLED, SURFACE CHROME-COATED, COMPUTERIZED DRILLING FEED SPEED: 0.6 TO 6M/MIN (NORMALLY BETWEEN 2.5 AND 4M/MIN) MAIN MOTOR: 22KW INVERTER CONTROL FEEDING AND DISCHARGING MOTOR: 2.2KW EACH, INVERTER CONTROL MOTORS FOR STRIP PLATE AND SCREENING PLATE: 1.5KW×2, POWER-DRIVEN WORM-GEAR LIFT, WITH RULER AND TRAVEL SWITCHES PVC APRON FEEDING, CHROM-COATED DOUBLE-ROLLER DISCHARGING UP AND DOWN CONTROL: PNEUMATIC CONTROL TOTAL POWER: 27.2KW QUANTITY AVAILABLE: 1 Learn More

M-1519 NONWOVEN PRODUCTION LINE WIDTH 7000mm YEAR 2004

OFFER 001
MASIAS HOPPER FEEDER

OFFER 002
MASIAS CARDING MACHINE

OFFER 003
PRE-NEEDLE LOOM

OFFER 004
FINISH NEEDLE LOOM

OFFER 005
AUTOMATEX ACCUMULATOR

OFFER 007
AUTOMATEX LONGITUDINAL AND CROSS CUTTER

QUANTITY: 1 LINE

Learn More

TT-1196 NONWOVEN MACHINES FOR NEEDLEFELTS PRODUCTON, YEAR 1995 TO 2015 MACHINES FOR THE PRODUCTION OF NEEDLEPUNCHED FELTS 1. BLENDING THT YEAR 2015 2. OPENING: THT YEAR 2015 3. CARDING: F.O.R. YEAR 1995 UPDATED ON 2015 4. CROSSLAPPING: GUASCH YEAR 2000 UPDATED ON 2015 5. NEEDLEPUNCHING: CHANGSHU SNM YEAR 2015 6. SLITTING. CROSSCUTTING & WINDING: THT YEAR 2015 Learn More