Search results for: 'needle punch l'

REFERENCE NUMBER: M-4398 (101048QEU9RX) K STRUCTURING NEEDLE LOOM PUNCH MACHINE YEAR 1974 WIDTH 4880mm STRUCTURING NEEDLE LOOM PUNCH MACHINE DR. ERNST FEHRER AG TYPE NL 11 WORKING WIDTH 4880mm YEAR 1974 LAMELLA GAUGE 4.7mm THE CONTROLS AND ELECTRIC BOARDS ARE NOT INCLUDED BECAUSE THE MACHINE WAS CONTROLLED BY A CENTRAL CONTROL FOR THE ENTIRE LINE TOTALLY 2 OR 3 SETS OF NEEDLE BOARDS CAN BE SUPPLIED WITH THE MACHINE THE MACHINE WAS PURCHASED AS SECOND-HAND APPROXIMATELY 7 YEARS AGO AND WAS USED FOR MAKING CARPETS SINCE THEN AS PER OPINION OF THE PLANT TECHNICIAN, THE MAIN BEARING IN THE HOUSING SHOULD BE OKAY. THE MACHINE WAS PURCHASED FROM A MULTINATIONAL COMPANY 7 YEARS AGO AND WAS IN GREAT CONDITION WHEN THE USED MACHINE CHANGED OWNER THE TOTAL INSIDE WIDTH IS 5178mm THE WIDTH ON WHICH THE NEEDLE BOARDS ARE DRILLED WITH HOLES FOR THE NEEDLES IS 4920mm. SO THIS IS THE TOTAL MAXIMUM WIDTH ON WHICH THE MATERIAL WOULD BE NEEDLE PUNCHED. NEEDLE BOARDS INSIDE THE MACHINE: 4 BOARDS ON ONE LINE. NUMBER OF NEEDLES PER METER: ESTIMATED TO BE 5,000 NEEDLES/M, BUT NEEDS TO BE CHECKED. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: T-6840 AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE BRAND: AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE CONSISTING OF: BLEND LINE, 60” WIDE, 4 HOPPERS WITH 12 HEAVY DUTY EXTENDED APRONS & NEW ELECTRONIC WEIGHING SYSTEM (2016). ALL MACHINES COMPLETELY RECONDITIONED IN 2016. OMMI STACK RESERVE, AUTOMATIC COMBO 332, YEAR 2000 SPINNBAU CARD, 2500mm, DOUBLE DOFFER, YEAR 1995, REPORTED ~1500 TO 1800 PPH CAPACITY DEPENDING UPON PRODUCT. AUTOMATEX FA/3000 TC CROSSLAPPER, YEAR 1997, AC DRIVES. BATT DRAFTER, 12 ROLLS. AUTOMATEX PR-100/T PRE-NEEDLER, 60mm STROKE, YEAR 1997 DRAFTER, 5 ROLLS. AUTOMATEX AG 154/TB NEEDLE LOOM, QUAD PUNCH, 50mm STROKE, YEAR 1997 FOUR ROLL STRETCH. METAL DETECTOR. ENTEX TENTER WITH VERTICAL IR HEAT BANKS, YEAR 1997 WINDER, YEAR 1997 PERKINS 4 ROLL CALENDER, NO STEEL ROLLS OR HEAT SYSTEM INCLUDED BUT MIGHT BE NEGOTIATED. EHHARDT+LEIMER GUIDER MODEL SE 11062, YEAR 2013 ENTEC WINDER, YEAR 1997 FINISHED WIDTH REPORTED OF 210" BUT COULD GO WIDER. LINE RAN PRIMARILY GEOTEXTILE & BEDDING PRODUCTS FROM 4.5 TO 10 OZ/YD. QUANTITY: 1 Learn More

REFERENCE NUMBER: C-4010

NEEDLE PUNCHING PRODUCTION LINE, WORKING WIDTH 3000mm TO 6000mm, YEAR 2005

 

DETAILS:

 

OFFER 001

NEEDLE PUNCHING PRODUCTION LINE

YEAR: 2005

WORKING WIDTH: 6000mm

WEIGHT: 120 TO 800 G/M²

MATERIAL: PP, PES

CAPACITY: 600 KG/H

WITH FOLLOWING FIBERS:

6.7 DTEX

FIBER LENGTH: 60 TO 90mm

WORKING HOURS: CA. 41000 H

 

CONSISTS OF:

OFFER 002

BALE OPENER

MAKE: FALUBAZ

FEEDING TABLE: 1000mm WIDTH

2000mm LENGTH

WITH ELECTRONICALLY WEIGH BOXES

COLLECTING CONVEYOR

AND MIXING UNIT

QUANTITY: 4

 

OFFER 003

CHAMBER FIBER MIXING UNIT

QUANTITY: 6

 

OFFER 004

FINE OPENER

WITH METAL DETECTOR

QUANTITY: 1

 

OFFER 005

DUST COLLECTION UNIT

QUANTITY: 2

 

OFFER 006

FOR VOLUMETRIC HOPPER FEEDER

MAKE: FOR

TYPE: HF

QUANTITY: 1

 

OFFER 007

FOR CARDING MACHINE

MAKE: FOR

TYPE: WM 2+2

WORKING WIDTH: 3000mm

BREAST: 3X WORKERS / STRIPPERS

TAMBOUR: 4X WORKERS / STRIPPERS

DOUBLE DOOFER

CONDENSING SYSTEM

QUANTITY: 1

 

OFFER 008

AUTOMATEX CROSSLAPPER

MAKE: AUTOMATEX

TYPE: FA 5000/TC

WITH PROFILING

QUANTITY: 1

 

OFFER 009

ASSELIN WEB DRAFTER

MAKE: ASSELIN

TYPE: ETO-15

ROLLERS: 15

QUANTITY: 1

 

OFFER 010

AUTOMATEX PRE – NEEDLE LOOM

MAKE: AUTOMATEX

TYPE: PR160/T

NEEDING: DOUBLE BOARD DOWN

NEEDLES: 2X 8000 N/M

STROKE: 55mm

INCLUSIVE CBF FEEDING SYSTEM

QUANTITY: 1

 

OFFER 011

AUTOMATEX NEEDLE LOOM

MAKE: AUTOMATEX

TYPE: AG160/TB

NEEDING: 4 BOARD QUATTRO PUNCH

NEEDLES: 4X 8000 N/M

STROKE: 65mm

QUANTITY: 1

 

OFFER 012

BELMATEX ACCUMULATOR

MAKE: BELMATEX

QUANTITY: 1

 

OFFER 013

BELMATEX END OF LINE

MAKE: BELMATEX

SLITTER

WINDER

QUANTITY: 1

 

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: M-3290

FEHRER NL42 NEEDLE LOOM YEAR 1985 WIDTH 2700mm – QUATTRO PUNCH

 

MAKE: FEHRER

TYPE: NL42

YEAR: 1985

WORKING WIDTH 2700mm

QUATTRO PUNCH

TWO BOARDS UP AND TWO BOARDS DOWN

NEEDLES: 4 X 7500 N/M

WEIGHT: CA. 22TO

DIMENSIONS: 3900mm X 2300mm X 2600mm

 

COMPLETE WITH CONTROL SYSTEM

COMPLETE WITH FEEDING SYSTEM

DC MAIN DRIVE

GOOD CONDITION

OVERHAULED 2 GEARBOXES

 

MACHINE IS STILL IN OPERATION

 

QUANTITY: 1

Learn More

V-1177 GEOTEXTIL NEEDLE PUNCH PRODUCTION LINE, WORKING WIDTH 2500mm TO 7400mm, YEAR 1992 TO 1994

OFFER 001
PRODUCTION SPEED: 20 M/MIN
WEIGHT: 130 TO 600 G/M²

COMPOSED OF:
OFFER 002
HERGETH CARDING

OFFER 003
ASSELIN CROSSLAPPER

OFFER 004
FEHRER PRE-NEEDLING

OFFER 005
FEHRER NEEDLING

OFFER 006
ACCUMULATOR

QUANTITY: 1 LINE

Learn More

T-7943 DILO NEEDLE PUNCHING MACHINE – PRE AND FINISH NEEDLER, WIDTH 3600mm TO 4100mm, YEAR 1986 ITEM 001 DILO NEEDLE PUNCHING MACHINE - PRE NEEDLER, WIDTH 4100mm, YEAR 1986 CONDITION / STATUS: IN OPERATION QUANTITY: 1 ITEM 002 DILO NEEDLE PUNCHING MACHINE - FINISH NEEDLER, WIDTH 3600mm, YEAR 1986 CONDITION / STATUS: IN OPERATION QUANTITY: 1 Learn More

KB-110 BALE OPENER (2 SETS) KS-130 PRE OPENER (1 SET) HM-200 BIG CAPACITY BLENDER (1 SET) KS-130 FINE OPENER (1 SET) GM-220 VIBRATING HOPPER (1 SET) SL-250 CARDING MACHINE (C2D2) (1 SET) PW-600 CROSS LAPPER (1 SET) JL-590 BATT FEEDER (1 SET) GY-580 HIGH SPEED PRE-NEEDLE LOOM (1 SET) GS-570 HIGH SPEED UPWARD PUNCH NEEDLE LOOM (1 SET) GX-570 HIGH SPEED DOWNWARD PUNCH NEEDLE LOOM (1 SET) CJ-550 WINDER (1 SET) ELECTRIC CONTROL CABINET (1 SET) MOTORS: TECO (TAIWAN) INVERTERS: EMERSON PLC+TOUCH SCREEN: MITSUBISHI Learn More

M-4892 HIGH-SPEED NEEDLE PUNCHING MACHINE

MACHINE WIDTH: 2000mm TO 9200mm
NEEDLE DENSITY: 4000 TO 8000N/M
NEEDLE STROKE 30mm TO 60mm
PUNCHING FREQUENCY: 800 TO 1200S/MIN

QUANTITY: 1

Learn More

M-6055 NONWOVEN NEEDLE FELT LINE, WIDTH 4300mm, YEAR 1970 TO 2004

OFFER 001
NONWOVEN NEEDLE FELT LINE – RENEWED 3 YEARS AGO
WORKING WIDTH: 4300mm

OFFER 002
HERGETH BALE OPENER
YEAR: 1986
WORKING WIDTH: 1000mm

OFFER 003
OILING UNIT
TANK CAPACITY: 250 LITRES

OFFER 004
AUGUST PROTT FAN FOR FIBER TRANSPORT
POWER: 7.5 KW

OFFER 005
TERMO GORING KERR METAL DETECTOR AND METAL SEPARATOR
YEAR: 2004

OFFER 006
TEMAFA MIXING BIN

OFFER 007
FOR FAN FOR FIBER TRANSPORTATION

OFFER 008
FOR CHUTE FEED WITH MOVEABLE CONDENSOR
WORKING WIDTH: 2500mm

OFFER 009
WEB DENSITY MEASURING AND AUTOMATIC ALIGNING

OFFER 010
FOR CARDING MACHINE
WORKING WIDTH: 2500mm

OFFER 011
ASSELIN CROSSLAPPER
YEAR: 1984
INPUT WIDTH: 2500mm

OFFER 012
FEHRER FIRST NEEDLE LOOM
YEAR: 1973
WORKING WIDTH: 4800mm

OFFER 013
UNWINDING FOR PRELIMINARY WEB

OFFER 014
CONVEYOR SYSTEM FOR WEB TRANSPORTATION TO SECOND NEEDLE LOOM

OFFER 015
FEHRER SECOND NEEDLE LOOM
YEAR: 1970
WORKING WIDTH: 4400mm

OFFER 016
FEHRER THIRD NEEDLE LOOM
YEAR: 1973
WORKING WIDTH: 4800mm

OFFER 017
BENEDETTI & CALAMAI TRIMMING AND WINDING UNIT
YEAR: 1995
TABLE WIDTH: 5500mm

OFFER 018
LAROCHE EDGE TRIM OPENER

QUANTITY: 1 LINE

Learn More

P-3226 FEHRER NL 11 STRUCTURING NEEDLE PUNCH MACHINE, WIDTH 2400mm, YEAR 1977

FEHRER
TYPE: NL 11
STRUCTURING NEEDLE PUNCH MACHINE
YEAR: 1977
WIDTH: 2400mm

QUANTITY: 1

Learn More