Search results for: 'pre needle m'

REFERENCE NUMBER: G-9488 NONWOVEN LINES FOR GEOTEXTILES 3200mm TO 5000mm A) NEEDLING LINE FOR GEOTEXTILE B) NEEDLING LINE FOR GEOTEXTILE QUANTITY AVAILABLE: 2 Learn More

H-1305 BATT FEEDING SYSTEM - WORKING WIDTH 3000mm

WORKING WIDTH: 3000mm
CONTROL SYSTEM INCLUDED

COMPOSITION OF THE MACHINE:
- LOWER PVC INCLINED CONVEYOR BELT FOR THE TRANSPORT OF THE WEB FROM THE CROSS LAPPER TO THE ENTRANCE OF THE NEEDLE LOOM.
- UPPER PVC COMPRESSION BELT FOR THE PRE-COMPRESSION OF THE WEB BEFORE ENTERING THE FEEDING ROLLS.
- LOWER PVC CONVEYOR AND UPPER PVC BELT DRIVEN BY ONE GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- PAIR OF FEEDING ROLLS WITH PLASTIC FINGERS TO GUIDE THE COMPRESSED WEB CLOSE TO FIRST NEEDLE ZONE OF THE PRE-NEEDLE LOOM. ROLLER PAIR DRIVEN BY GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- BATT FEEDING SYSTEM INSTALLED ON RAIL SYSTEM AND EASY REMOVABLE FOR MAINTENANCE OF THE NEEDLE LOOM

TECHNICAL DATA:
ELECTRICAL INFORMATION:
ELECTRIC: MAIN VOLTAGE 400 V, 50 HZ, 3 PH.
CONTROL VOLTAGE: DC - 24 V / AC - 230 V
OTHER INFORMATION:
AIR PRESSURE (CONSTANT): MIN. 6 BAR (AT SITE)
OPERATOR SIDE LEFT OR RIGHT (IN WEB RUNNING DIRECTION)
LACQUER COATING:
MAIN COLOR OF THE MACHINES: RAL 7035 (LIGHT GREY)
CONTROL CABINET AND CONTROL DESK RAL 7035 (LIGHT GREY)
LABELING: ENGLISH
TECHNICAL DOCUMENTATION: ONE TIME ON CD-ROM (FURTHER SETS AVAILABLE AT ADDITIONAL COST)
LANGUAGE FOR OPERATING INSTRUCTIONS: ENGLISH
LANGUAGE FOR FURTHER DOCUMENTATION (SPARE PART LISTS, WIRING DIAGRAM, ETC): ENGLISH

ENVIRONMENTAL CONDITIONS:
INSTALLATION HEIGHT ABOVE SEA LEVEL: LESS THAN OR EQUAL TO 1,000 METERS
TEMPERATURE: 24° C (±2° C)
RELATIVE HUMIDITY: 65% (±5%)
ABSOLUTE WATER CONTENT: 9 TO 12 G/KG DRY AIR
NOTE: PLEASE MAKE SURE THAT THE TEMPERATURE INSIDE THE CONTROL CABINET DOES NOT EXCEED 450 CENTIGRADE. IN CASE OF EXCESSIVE ROOM TEMPERATURES WE RECOMMEND AN AIR-CONDITIONING SYSTEM FOR THE CONTROL CABINETS TO AVOID MALFUNCTION OF ELECTRICAL COMPONENTS

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-4010

NEEDLE PUNCHING PRODUCTION LINE, WORKING WIDTH 3000mm TO 6000mm, YEAR 2005

 

DETAILS:

 

OFFER 001

NEEDLE PUNCHING PRODUCTION LINE

YEAR: 2005

WORKING WIDTH: 6000mm

WEIGHT: 120 TO 800 G/M²

MATERIAL: PP, PES

CAPACITY: 600 KG/H

WITH FOLLOWING FIBERS:

6.7 DTEX

FIBER LENGTH: 60 TO 90mm

WORKING HOURS: CA. 41000 H

 

CONSISTS OF:

OFFER 002

BALE OPENER

MAKE: FALUBAZ

FEEDING TABLE: 1000mm WIDTH

2000mm LENGTH

WITH ELECTRONICALLY WEIGH BOXES

COLLECTING CONVEYOR

AND MIXING UNIT

QUANTITY: 4

 

OFFER 003

CHAMBER FIBER MIXING UNIT

QUANTITY: 6

 

OFFER 004

FINE OPENER

WITH METAL DETECTOR

QUANTITY: 1

 

OFFER 005

DUST COLLECTION UNIT

QUANTITY: 2

 

OFFER 006

FOR VOLUMETRIC HOPPER FEEDER

MAKE: FOR

TYPE: HF

QUANTITY: 1

 

OFFER 007

FOR CARDING MACHINE

MAKE: FOR

TYPE: WM 2+2

WORKING WIDTH: 3000mm

BREAST: 3X WORKERS / STRIPPERS

TAMBOUR: 4X WORKERS / STRIPPERS

DOUBLE DOOFER

CONDENSING SYSTEM

QUANTITY: 1

 

OFFER 008

AUTOMATEX CROSSLAPPER

MAKE: AUTOMATEX

TYPE: FA 5000/TC

WITH PROFILING

QUANTITY: 1

 

OFFER 009

ASSELIN WEB DRAFTER

MAKE: ASSELIN

TYPE: ETO-15

ROLLERS: 15

QUANTITY: 1

 

OFFER 010

AUTOMATEX PRE – NEEDLE LOOM

MAKE: AUTOMATEX

TYPE: PR160/T

NEEDING: DOUBLE BOARD DOWN

NEEDLES: 2X 8000 N/M

STROKE: 55mm

INCLUSIVE CBF FEEDING SYSTEM

QUANTITY: 1

 

OFFER 011

AUTOMATEX NEEDLE LOOM

MAKE: AUTOMATEX

TYPE: AG160/TB

NEEDING: 4 BOARD QUATTRO PUNCH

NEEDLES: 4X 8000 N/M

STROKE: 65mm

QUANTITY: 1

 

OFFER 012

BELMATEX ACCUMULATOR

MAKE: BELMATEX

QUANTITY: 1

 

OFFER 013

BELMATEX END OF LINE

MAKE: BELMATEX

SLITTER

WINDER

QUANTITY: 1

 

QUANTITY: 1 LINE

Learn More

M-1519 NONWOVEN PRODUCTION LINE WIDTH 7000mm YEAR 2004

OFFER 001
MASIAS HOPPER FEEDER

OFFER 002
MASIAS CARDING MACHINE

OFFER 003
PRE-NEEDLE LOOM

OFFER 004
FINISH NEEDLE LOOM

OFFER 005
AUTOMATEX ACCUMULATOR

OFFER 007
AUTOMATEX LONGITUDINAL AND CROSS CUTTER

QUANTITY: 1 LINE

Learn More

M-6053 SPUNBOND PRODUCTION LINE, WORKING WIDTH 4040mm TO 4500mm

OFFER 001
SPUNBOND PRODUCTION LINE
WORKING WIDTH: 4040mm
WEIGHT: 130 TO 250 G/M2

OFFER 002
POLYMER CLEANING GROUP

OFFER 003
CRYSTALLIZING GROUP

OFFER 004
DRYING GROUP

OFFER 005
PNEUMATIC CONVEYING SYSTEM

OFFER 006
EXTRUDER HOPPER

OFFER 007
EXTRUDER

OFFER 008
FILTERING UNIT

OFFER 009
MELT TRANSFER LINE

OFFER 010
SPINNING BEAM

OFFER 011
SPINNING PACKS

OFFER 012
FILAMENTS QUENCHING SYSTEM

OFFER 013
FILAMENTS DRAWING AND DISTRIBUTION SYSTEM

OFFER 014
WEB FORMING CONVEYOR BELT

OFFER 015
CREEL FOR APPLICATION OF REINFORCING FILAMENTS

OFFER 016
PRE-NEEDLING MACHINE

OFFER 017
NEEDLING MACHINE

OFFER 018
THERMOSETTING UNIT

OFFER 019
OUTLET CALENDER

OFFER 020
FOULARD

OFFER 021
BINDER PREPARATION SYSTEM

OFFER 022
DRYER

OFFER 023
OUTLET CALENDER

OFFER 024
AUTOMATIC WINDER

OFFER 025
AIR COMPRESSORS (FOR FILAMENTS STRETCHING EJECTORS)

OFFER 026
DIATHERMIC OIL HEATING SYSTEM

OFFER 027
CHILLED WATER CIRCULATION AND GENERATION SYSTEM

OFFER 028
EQUIPMENT FOR CLEANING CYCLE, SPECIAL TOOLS

OFFER 029
FIBRE DUST RECOVERY SYSTEM

OFFER 030
EDGES RECOVERY SYSTEM

OFFER 031
SPINNING SECTION STEEL STRUCTURE

OFFER 032
DISTRIBUTION ELECTRIC CABINETS

OFFER 033
PROCESS ELECTRIC SYSTEM OF EXISTING MACHINES ACCORDING TO THE ACTUAL LAYOUT

OFFER 034
CABLES AND CABLING MATERIALS

QUANTITY: 1 LINE

Learn More

T-7954 SAMHWA NEEDLE PUNCHING MACHINE UPSTROKE, WIDTH 3950mm, YEAR 2017 PRESENT STATUS: FULLY FUNCTIONAL QUANTITY: 1 Learn More

KB-110 BALE OPENER (2 SETS) KS-130 PRE OPENER (1 SET) HM-200 BIG CAPACITY BLENDER (1 SET) KS-130 FINE OPENER (1 SET) GM-220 VIBRATING HOPPER (1 SET) SL-250 CARDING MACHINE (C2D2) (1 SET) PW-600 CROSS LAPPER (1 SET) JL-590 BATT FEEDER (1 SET) GY-580 HIGH SPEED PRE-NEEDLE LOOM (1 SET) GS-570 HIGH SPEED UPWARD PUNCH NEEDLE LOOM (1 SET) GX-570 HIGH SPEED DOWNWARD PUNCH NEEDLE LOOM (1 SET) CJ-550 WINDER (1 SET) ELECTRIC CONTROL CABINET (1 SET) MOTORS: TECO (TAIWAN) INVERTERS: EMERSON PLC+TOUCH SCREEN: MITSUBISHI Learn More

REFERENCE NUMBER: C-2459 FEHRER AIRLAY NONWOVEN LINE, WIDTH 2200mm, YEAR 1992 SPECIFICATIONS: 1 PC. AIRLAY NONWOVEN LINE FEHRER V 21 K 12 2200 MM WORKING WIDTH, YEAR OF CONSTRUCTION 1992, SECOND-HAND THE LINE IS CONSISTING OF: 1 PC. CHUTE FEEDER TEMAFA WITH CONDENSER. 1 PC. WEIGHTING UNIT KUKLA WITH CONTINUOUS BELT. 1 PC. FEEDING UNIT, CONTINUOUS BELT TYPE FEHRER - FEEDING V 21. 1 PC. WEB FORMING UNIT FEHRER V 21. 2200 mm WORKING WIDTH. 1 PC. AERODYNAMIC CARD FEHRER K 12, 2200 mm WORKING WIDTH. 1 PC. NEEDLE LOOM FEHRER NL 9 S, 2200 mm WORKING WIDTH. SINGLE BOARD DOWN STROKE MACHINE, 3000 NEEDLES/M. MAX. 1500 STROKES/MIN. WITH OUTLET ROLLERS. 1 PC. WINDER WITH LONGITUDINAL CUTTER. (NO CROSS CUTTER AVAILABLE.) 1 PC. COMPLETE DUST COLLECTION UNIT. THE V 21 K 12 LINE IS SUITABLE FOR A WEIGHT RANGE OF APPROX. 400 TO 2000 GR/SWM AND A CAPACITY OF UP TO 600 KG/H, DEPENDING ON FIBERS. THE CONTROL PANELS, FILTERS ETC. ARE IN A GOOD CONDITION. 1 PC. RANDOM CARDING MACHINE FEHRER K 12 (REF. NO. 2133817). 2300 mm WORKING WIDTH, YEAR OF CONSTRUCTION UNFORTUNATELY NOT KNOWN. WITH OPENING MACHINE K 12. WITH ONE ASSELIN NEEDLE LOOM MODEL 169, STROKE HEIGHT 0-30 MM. 2.800 mm WORKING WIDTH. WITH ONE FEHRER NEEDLE LOOM NL 12, 1200 STROKES/MIN. 60 mm STROKE HEIGHT, 2.400 mm WORKING WIDTH. INCL. CUTTING AND ROLLING SECTION. THE LINE CONSISTS OF K 12 SECTION ONLY. V 21 SECTION IS NOT INCLUDED. PREVIOUSLY USED FOR 200 TO 2000 GR/SQM. THE MINIMUM IS 200 GR/SQM. MAINLY USED TO PRODUCE HIGH QUALITY MATTRESS MATERIAL IN A SQM-RANGE OF 300-1200 G/SQM MADE FROM JUTE FIBRES. IN GENERAL ALMOST ALL TYPES OF FIBERS CAN BE PROCESSED. IT IS A GOOD MACHINE FOR NATURAL FIBERS. 1 PC. AIRLAY LINE ROLANDO / FEHRER V21/K12 (REF. NO. 2226950). 4400 MM WORKING WIDTH. THE LINE IS CONSISTING OF: - HOPPER FEEDER ROLANDO, CASTING IRON. - CHEMINEE FEEDER WITH AUTOMATIC REGULATED FEEDING ROLANDO. - SQUARE METER MEASURING UNIT AND CONTROL SYSTEM MADE BY FEHRER TYPE E-PW. - OPENER FEHRER V 21, 4400 MM WORKING WIDTH. - RANDOM CARDING MACHINE FEHRER K 12, 4400 MM WORKING WIDTH. THE LINE HAS WORKED ON 1000 GR / SQM AND UP. QUANTITY AVAILABLE: 1 Learn More

TT-1196 NONWOVEN MACHINES FOR NEEDLEFELTS PRODUCTON, YEAR 1995 TO 2015 MACHINES FOR THE PRODUCTION OF NEEDLEPUNCHED FELTS 1. BLENDING THT YEAR 2015 2. OPENING: THT YEAR 2015 3. CARDING: F.O.R. YEAR 1995 UPDATED ON 2015 4. CROSSLAPPING: GUASCH YEAR 2000 UPDATED ON 2015 5. NEEDLEPUNCHING: CHANGSHU SNM YEAR 2015 6. SLITTING. CROSSCUTTING & WINDING: THT YEAR 2015 Learn More

REFERENCE NUMBER: T-6852 AUTEFA, DILO, SPINNBAU NEEDLE-PUNCHING COMPLETE LINE BRAND: AUTEFA, DILO, SPINNBAU SHORT DESCRIPTION: NEEDLE-PUNCHING COMPLETE LINE 3° NEEDLE-PUNCHING COMPLETE LINE (1970 CA.) COMPOSED OF: 1 SINGLE DOFFER CARD BY “BESSI” WORKING WIDTH 2500mm - HOPPER-FEEDER “TEMAFA” WITH SCALE (WEIGHPAN) AND TOP SILO - BREAST UNIT DIAMETER 1500mm WITH 7 PAIRS WORKERS/STRIPPER DIAMETER 220/74, RIGID METALLIC WIRES STILL USABLE 60% APPROX. - TRANSPORT ROLL DIAMETER 1285mm, RIGID WIRES STILL USABLE FOR 80% APPOX - SWIFT DIAMETER 1500mm, 6 PAIRS WORKERS/STRIPPER DIAMETER 215/74, SWIFT WITH RIGID WIRES STILL USABLE 90% CA., FLEXIBLE WIRES FOR WORKERS STILL USABLE 80% APPROX - DOFFER DIAMETER 1500mm, FRIGID WIRES STILL USABLE 90% APPROX. - FLY-COMB 1 CROSSLAPPER “MAK-AUTEFA”, INLET WORKING WIDTH 2500mm, EXIT WORKING WIDTH 3000mm 1 PRE-NEEDLER “DILO” NFZ25, MATR. 2387/1965, NO. 2580 NEEDLES/LM WITH MOBILE STRIPPER PLATE FOR HEAVY FELTS 1500 GRS/SQM AND/OR VOLUMINOUS FIBERS 2 LONGITUDINAL CUT “MACCHI” 1 TRANSVERSAL CUT “SPINNBAU” 1 WINDER IN WEIGHTING CELLS (METTLER) QUANTITY: 1 Learn More