Search results for: 'sets'

FOR NONWOVEN MATERIALS: SPUNBOND, MELTBLOW, SPUNLACE, AIRLAID, PPE, PS, PES, NYLON66, ARAMID ETC.
OIL ABSORBER, WATERPROOF, BREATHABLE COMPOSITES
TOTAL MATERIAL THICKNESS RANGE: 20gsm TO 55gsm

WORKING WIDTH: 1600mm
CAPACITY: 10 TO 100 METERS PER MINUTE
ONE PATTERN ROLLER
TITANIUM HORNS
ULTRASONIC SYSTEM 20 KHZ, 2000 WATTS (10 SETS)
PLC CONTROLS WITH TOUCH SCREEN
ELECTRICAL: 380 VOLTS, 3-PHASE, 28 KW
AIR: 6 BAR PER CM2 , 2 LITERS PER HOUR
OPTIONAL EXTRA PATTERN ROLLER AVAILABLE (PRICED SEPERATELY)
WITH CE CERTIFICATE, TOOL BOX, USER MANUAL

LEAD TIME: 110 DAYS

QUANTITY: 1

REFERENCE NUMBER: L-4643
MODEL: AP-1000/1250
WIDTH: 2600mm
YEAR: 2000
QUANTITY: 1

REFERENCE NUMBER: A-1548 (0707GHBAV06) A
BRAND: SUCKER MULLER HACOBA
WIDTH 3400mm
YEAR: 1999
QUANTITY: 1

H-1305 BATT FEEDING SYSTEM - WORKING WIDTH 3000mm

WORKING WIDTH: 3000mm
CONTROL SYSTEM INCLUDED

COMPOSITION OF THE MACHINE:
- LOWER PVC INCLINED CONVEYOR BELT FOR THE TRANSPORT OF THE WEB FROM THE CROSS LAPPER TO THE ENTRANCE OF THE NEEDLE LOOM.
- UPPER PVC COMPRESSION BELT FOR THE PRE-COMPRESSION OF THE WEB BEFORE ENTERING THE FEEDING ROLLS.
- LOWER PVC CONVEYOR AND UPPER PVC BELT DRIVEN BY ONE GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- PAIR OF FEEDING ROLLS WITH PLASTIC FINGERS TO GUIDE THE COMPRESSED WEB CLOSE TO FIRST NEEDLE ZONE OF THE PRE-NEEDLE LOOM. ROLLER PAIR DRIVEN BY GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- BATT FEEDING SYSTEM INSTALLED ON RAIL SYSTEM AND EASY REMOVABLE FOR MAINTENANCE OF THE NEEDLE LOOM

TECHNICAL DATA:
ELECTRICAL INFORMATION:
ELECTRIC: MAIN VOLTAGE 400 V, 50 HZ, 3 PH.
CONTROL VOLTAGE: DC - 24 V / AC - 230 V
OTHER INFORMATION:
AIR PRESSURE (CONSTANT): MIN. 6 BAR (AT SITE)
OPERATOR SIDE LEFT OR RIGHT (IN WEB RUNNING DIRECTION)
LACQUER COATING:
MAIN COLOR OF THE MACHINES: RAL 7035 (LIGHT GREY)
CONTROL CABINET AND CONTROL DESK RAL 7035 (LIGHT GREY)
LABELING: ENGLISH
TECHNICAL DOCUMENTATION: ONE TIME ON CD-ROM (FURTHER SETS AVAILABLE AT ADDITIONAL COST)
LANGUAGE FOR OPERATING INSTRUCTIONS: ENGLISH
LANGUAGE FOR FURTHER DOCUMENTATION (SPARE PART LISTS, WIRING DIAGRAM, ETC): ENGLISH

ENVIRONMENTAL CONDITIONS:
INSTALLATION HEIGHT ABOVE SEA LEVEL: LESS THAN OR EQUAL TO 1,000 METERS
TEMPERATURE: 24° C (±2° C)
RELATIVE HUMIDITY: 65% (±5%)
ABSOLUTE WATER CONTENT: 9 TO 12 G/KG DRY AIR
NOTE: PLEASE MAKE SURE THAT THE TEMPERATURE INSIDE THE CONTROL CABINET DOES NOT EXCEED 450 CENTIGRADE. IN CASE OF EXCESSIVE ROOM TEMPERATURES WE RECOMMEND AN AIR-CONDITIONING SYSTEM FOR THE CONTROL CABINETS TO AVOID MALFUNCTION OF ELECTRICAL COMPONENTS

QUANTITY: 1

P-3505 DORNIER AIRJET LABEL LOOMS YEAR 2000 JACQUARD

DORNIER
AIRJET LABEL LOOMS
YEAR: 2000
WITH STAUBLI JACQUARD CX880
CONTROLLER JC5
1152 HOOKS TAFFETA WEAVING 8x20

QUANTITY: 2 SETS

V-1325 FEHRER NEEDLE LOOM MODEL NL21/S, WIDTH 3000mm, YEAR 1986 – 5000 NEEDLES/METER

NEEDLE LOOM
MAKE: FEHRER
MODEL: NL21/S
WIDTH: 3000mm
YEAR: 1986
NEEDLE PATTERN 2 X 5000 PATTERN K1 (300mm FRONT TO BACK)
TOTAL 6 SECTION BOARDS 1000mm WIDE EACH
STROKE 35mm
1800 RPM
OUTLET ROLLER 200mm DIAMETER

QUANTITY: 1

C-4025 MURATA LINKED CONER WITH 28 DRUMS, YEAR 1989

MURATA LINKED CONER
YEAR: 1989
28 DRUMS
STEEL DRUM (NO CERAMIC GUIDE): 2W
YOLK CREDLE
CONE ANGLE: 5 DEG’ 57’

QUANTITY: 10 SETS

C-4024 HOWA RING FRAME UA-33F WITH 960 SPINDLES, RING DIAMETER 42mm, YEAR 1990

HOWA RING FRAME
MODEL: UA-33F
YEAR: 1990
SPINDLES: 960 SPINDLES
GAUGE: 75mm
SPINDLE WRAP DIAMETER: 23.8mm
RING DIAMETER: 42mm

QUANTITY: 10 SETS

M-6054 EXTRUSION PLANT FOR FOAMED PET, WORKING WIDTH SHEETS 610mm x 240mm

OFFER 001
EXTRUSION PLANT
FOR FOAMED PET
WORKING WIDTH: SHEETS 610mm x 240mm
THICKNESS: 5mm TO 60mm
DENSITY: 80 TO 250 KG/M3
CAPACITY: UP TO 500 KG PER HOUR

OFFER 002
SILO FOR VIRGIN MATERIAL

OFFER 003
DRYING SYSTEM (SUITABLE FOR 500 KG PER HOUR)

OFFER 004
GRAVIMETRIC FEEDING SYSTEM

OFFER 005
GAS STOCKING SYSTEM

OFFER 006
GAS FEEDING SYSTEM

OFFER 007
EXTRUDER

OFFER 008
SCREEN CHANGER

OFFER 009
STRAND DYE WITH ELEMENTS FOR EXTRUSION

OFFER 010
PNEUMATIC SHAPER FOR SHAPING THE BOARD BY ADJUSTING THE LOAD

OFFER 011
HAUL OFF UNIT

OFFER 012
ROLLERS FOR BOARDS CONVEYING

OFFER 013
PULLER HAUL OFF

OFFER 014
TRANSVERSAL CUTTING UNIT

OFFER 015
FINISHING EQUIPMENT

OFFER 016
BLOCK WELDING MACHINE

OFFER 017
FINISHING PLATFORM

OFFER 018
HORIZONTAL CUTTING MACHINE

OFFER 019
SHEETS WELDING MACHINE

OFFER 020
SCRAPS RECYCLING SYSTEM

OFFER 021
GRINDER TO MILL THE PIECES OF MATERIAL

OFFER 022
COMPACTING UNIT

OFFER 023
STORING SILOS FOR DENSIFIED FOAM PET

OFFER 024
PROCESS ELECTRIC SYSTEM OF EXISTING MACHINES ACCORDING TO THE ACTUAL LAYOUT

OFFER 025
CABLES AND CABLING MATERIALS

OFFER 026
PIPING

QUANTITY: 1 PLANT

P-3225 DR. ERNST FEHRER AG AUSTRIA NL 11 STRUCTURING NEEDLE LOOM, WIDTH 4880mm, YEAR 1974

DR. ERNST FEHRER AG AUSTRIA
TYPE: NL 11
STRUCTURING NEEDLE LOOM
YEAR: 1974
WORKING WIDTH: 4880mm

QUANTITY: 1