Search results for: 'Complete T'

REFERENCE NUMBER: T-6840 AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE BRAND: AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE CONSISTING OF: BLEND LINE, 60” WIDE, 4 HOPPERS WITH 12 HEAVY DUTY EXTENDED APRONS & NEW ELECTRONIC WEIGHING SYSTEM (2016). ALL MACHINES COMPLETELY RECONDITIONED IN 2016. OMMI STACK RESERVE, AUTOMATIC COMBO 332, YEAR 2000 SPINNBAU CARD, 2500mm, DOUBLE DOFFER, YEAR 1995, REPORTED ~1500 TO 1800 PPH CAPACITY DEPENDING UPON PRODUCT. AUTOMATEX FA/3000 TC CROSSLAPPER, YEAR 1997, AC DRIVES. BATT DRAFTER, 12 ROLLS. AUTOMATEX PR-100/T PRE-NEEDLER, 60mm STROKE, YEAR 1997 DRAFTER, 5 ROLLS. AUTOMATEX AG 154/TB NEEDLE LOOM, QUAD PUNCH, 50mm STROKE, YEAR 1997 FOUR ROLL STRETCH. METAL DETECTOR. ENTEX TENTER WITH VERTICAL IR HEAT BANKS, YEAR 1997 WINDER, YEAR 1997 PERKINS 4 ROLL CALENDER, NO STEEL ROLLS OR HEAT SYSTEM INCLUDED BUT MIGHT BE NEGOTIATED. EHHARDT+LEIMER GUIDER MODEL SE 11062, YEAR 2013 ENTEC WINDER, YEAR 1997 FINISHED WIDTH REPORTED OF 210" BUT COULD GO WIDER. LINE RAN PRIMARILY GEOTEXTILE & BEDDING PRODUCTS FROM 4.5 TO 10 OZ/YD. QUANTITY: 1 Learn More

C-4294 AUTOMATEX CROSS LAPPER, SPEED 65 M/MIN, WIDTH EXIT 3500mm, YEAR 2006

CROSS LAPPER
BRAND: AUTOMATEX
MODEL: FA 3000 TC
YEAR: 2006
YEAR COMPLETE RENEWED: 2010 FROM COMPANY AUTOMATEX
SPEED: 65 M/MIN
WIDTH ENTRANCE: 3000mm
WIDTH EXIT: 3500mm
IN THIS MACHINERY THE TIMING BELTS
AND CONVEYOR BELTS ARE IN GOOD CONDITIONS
WE WILL DISMANTLED PERSONALLY
AND THERE WILL BE ALSO ALL THE ELECTRICAL CABLES

QUANTITY: 1

Learn More

M-6064 NONWOVEN NEEDLE FELT PUNCH PRODUCTION LINE, WIDTH 3000mm TO 5500mm, YEAR 2000

OFFER 001
NONWOVEN NEEDLE FELT LINE
NEEDLE PUNCH PRODUCTION LINE
FINAL FABRIC WIDTH: MAXIMUM 5500mm
YEAR: END OF 2000
BONDING: MECHANICAL (NEEDLING)
CAPACITY: ± 960 KG/H FOR A 250 G/M2 PRODUCT ON 4M WIDTH

OFFER 002
TEMAFA FIBRE OPENING SYSTEM
BALE OPENER

OFFER 003
SPINNBAU CARD FEEDING UNIT

OFFER 004
SPINNBAU ONE CARDING MACHINE
WORKING WIDTH: 3000mm

OFFER 005
AUTEFA CROSSLAPPER
WORKING WIDTH: 3000mm
LAYERING WIDTH: 6500mm

OFFER 006
DILO DI-LOOM OD-II 60 NEEDLE LOOM

OFFER 007
OUG-II 60 NEEDLE LOOM

OFFER 008
ONE ACCUMULATOR

OFFER 009
ONE WINDING AND CUTTING DEVICE

OFFER 010
ONE TEMAFA WEB EGE OPENING

OFFER 011
ALL SUCTION EQUIPMENT

OFFER 012
FULL CONTROL DESK & CONTROL CABINETS

OFFER 013
ONE PROCESS CONTROL SYSTEM

QUANTITY: 1 LINE

Learn More

M-6054 EXTRUSION PLANT FOR FOAMED PET, WORKING WIDTH SHEETS 610mm x 240mm

OFFER 001
EXTRUSION PLANT
FOR FOAMED PET
WORKING WIDTH: SHEETS 610mm x 240mm
THICKNESS: 5mm TO 60mm
DENSITY: 80 TO 250 KG/M3
CAPACITY: UP TO 500 KG PER HOUR

OFFER 002
SILO FOR VIRGIN MATERIAL

OFFER 003
DRYING SYSTEM (SUITABLE FOR 500 KG PER HOUR)

OFFER 004
GRAVIMETRIC FEEDING SYSTEM

OFFER 005
GAS STOCKING SYSTEM

OFFER 006
GAS FEEDING SYSTEM

OFFER 007
EXTRUDER

OFFER 008
SCREEN CHANGER

OFFER 009
STRAND DYE WITH ELEMENTS FOR EXTRUSION

OFFER 010
PNEUMATIC SHAPER FOR SHAPING THE BOARD BY ADJUSTING THE LOAD

OFFER 011
HAUL OFF UNIT

OFFER 012
ROLLERS FOR BOARDS CONVEYING

OFFER 013
PULLER HAUL OFF

OFFER 014
TRANSVERSAL CUTTING UNIT

OFFER 015
FINISHING EQUIPMENT

OFFER 016
BLOCK WELDING MACHINE

OFFER 017
FINISHING PLATFORM

OFFER 018
HORIZONTAL CUTTING MACHINE

OFFER 019
SHEETS WELDING MACHINE

OFFER 020
SCRAPS RECYCLING SYSTEM

OFFER 021
GRINDER TO MILL THE PIECES OF MATERIAL

OFFER 022
COMPACTING UNIT

OFFER 023
STORING SILOS FOR DENSIFIED FOAM PET

OFFER 024
PROCESS ELECTRIC SYSTEM OF EXISTING MACHINES ACCORDING TO THE ACTUAL LAYOUT

OFFER 025
CABLES AND CABLING MATERIALS

OFFER 026
PIPING

QUANTITY: 1 PLANT

Learn More

M-6050 COMPLETE NONWOVEN PRODUCTION LINE, WORKING WIDTH 2500mm TO 4000mm, YEAR 1974 TO 2005

OFFER 001
ITALIAN REGENERATION BEATING OPENER (WILLOW)

OFFER 002
RAMELLA CARDING MACHINE

OFFER 003
2N (TECTEX) CROSS LAPPER

OFFER 004
AUTOMATEX NEEDLE LOOM

OFFER 005
FEHRER NEEDLE LOOM

OFFER 006
MTV LONGITUDINAL CUTTER WITH 5 DISC BLADES

OFFER 007
DUST COLLECTOR (FILTER)

QUANTITY: 1 LINE

Learn More

C-3945 THIBEAU CARDING MACHINE CA5, WIDTH 2500mm, YEAR 1984 TO 1985

THIBEAU CARDING MACHINE
BRAND: THIBEAU
TYPE: CA5
YEAR: 1984 TO 1985
WIDTH: 2500mm

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-2505 AIR LAID LINE YEAR 2000 WIDTH 2400mm, CONTINUOUS OVEN FOR THERMOBONDING YEAR 2010 WIDTH 2600mm, LONGITUDINAL & TRANSVESAL CUTTER YEAR 2000 WIDTH 2500mm SPECIFICATIONS: NO. 1 AIR-LAY LINE BY "LAROCHE" – FRANCE NO. 1 CONTINUOUS OVEN FOR THERMOBONDING OF NONWOVENS BY "SICAM" - ITALY NO. 1 LONGITUDINAL AND TRANSVERSAL CUTTER BY "AUTOMATEX" - ITALY QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-2459 FEHRER AIRLAY NONWOVEN LINE, WIDTH 2200mm, YEAR 1992 SPECIFICATIONS: 1 PC. AIRLAY NONWOVEN LINE FEHRER V 21 K 12 2200 MM WORKING WIDTH, YEAR OF CONSTRUCTION 1992, SECOND-HAND THE LINE IS CONSISTING OF: 1 PC. CHUTE FEEDER TEMAFA WITH CONDENSER. 1 PC. WEIGHTING UNIT KUKLA WITH CONTINUOUS BELT. 1 PC. FEEDING UNIT, CONTINUOUS BELT TYPE FEHRER - FEEDING V 21. 1 PC. WEB FORMING UNIT FEHRER V 21. 2200 mm WORKING WIDTH. 1 PC. AERODYNAMIC CARD FEHRER K 12, 2200 mm WORKING WIDTH. 1 PC. NEEDLE LOOM FEHRER NL 9 S, 2200 mm WORKING WIDTH. SINGLE BOARD DOWN STROKE MACHINE, 3000 NEEDLES/M. MAX. 1500 STROKES/MIN. WITH OUTLET ROLLERS. 1 PC. WINDER WITH LONGITUDINAL CUTTER. (NO CROSS CUTTER AVAILABLE.) 1 PC. COMPLETE DUST COLLECTION UNIT. THE V 21 K 12 LINE IS SUITABLE FOR A WEIGHT RANGE OF APPROX. 400 TO 2000 GR/SWM AND A CAPACITY OF UP TO 600 KG/H, DEPENDING ON FIBERS. THE CONTROL PANELS, FILTERS ETC. ARE IN A GOOD CONDITION. 1 PC. RANDOM CARDING MACHINE FEHRER K 12 (REF. NO. 2133817). 2300 mm WORKING WIDTH, YEAR OF CONSTRUCTION UNFORTUNATELY NOT KNOWN. WITH OPENING MACHINE K 12. WITH ONE ASSELIN NEEDLE LOOM MODEL 169, STROKE HEIGHT 0-30 MM. 2.800 mm WORKING WIDTH. WITH ONE FEHRER NEEDLE LOOM NL 12, 1200 STROKES/MIN. 60 mm STROKE HEIGHT, 2.400 mm WORKING WIDTH. INCL. CUTTING AND ROLLING SECTION. THE LINE CONSISTS OF K 12 SECTION ONLY. V 21 SECTION IS NOT INCLUDED. PREVIOUSLY USED FOR 200 TO 2000 GR/SQM. THE MINIMUM IS 200 GR/SQM. MAINLY USED TO PRODUCE HIGH QUALITY MATTRESS MATERIAL IN A SQM-RANGE OF 300-1200 G/SQM MADE FROM JUTE FIBRES. IN GENERAL ALMOST ALL TYPES OF FIBERS CAN BE PROCESSED. IT IS A GOOD MACHINE FOR NATURAL FIBERS. 1 PC. AIRLAY LINE ROLANDO / FEHRER V21/K12 (REF. NO. 2226950). 4400 MM WORKING WIDTH. THE LINE IS CONSISTING OF: - HOPPER FEEDER ROLANDO, CASTING IRON. - CHEMINEE FEEDER WITH AUTOMATIC REGULATED FEEDING ROLANDO. - SQUARE METER MEASURING UNIT AND CONTROL SYSTEM MADE BY FEHRER TYPE E-PW. - OPENER FEHRER V 21, 4400 MM WORKING WIDTH. - RANDOM CARDING MACHINE FEHRER K 12, 4400 MM WORKING WIDTH. THE LINE HAS WORKED ON 1000 GR / SQM AND UP. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-2481 NONWOVEN LINE FOR WOOLEN INSULATION MATERIAL, WIDTH 2500mm, YEAR 2007 TO 2012 SPECIFICATIONS: NONWOVEN LINE FOR WOOLEN INSULATION MATERIAL YEAR OF CONSTRUCTION: VARIOUS, PLEASE SEE BELOW. THE LINE IS CONSISTING OF: BALE OPENER WITH CARDING WILLOW. METAL SEPARATOR MADE IN APPROX. 2007. PASS THROUGH CLEANER MADE IN APPROX. 2007. HOPPER FEEDER WITH FINE OPENER, RECONDITIONED EQUIPMENT. 2 LARGE BLENDING BINS WITH BIN EMPTIER, RECONDITIONED IN 2009. COMPLETE SUCTION AND AIR FILTRATION UNIT WITH DRUM FILTER AND COARSE FIBER PRE FILTER WITH FIBRE COMPACTOR AS WELL AS FINE DUST SEPARATOR. HOPPER FEEDER WITH RESERVE CHUTE. AIRLAY LINE MADE IN 2011. 2500 mm WORKING WIDTH. DOUBLE BAND OVEN MADE IN 2010, VERY EFFICIENT. LONGITUDINAL CUTTING DEVICE WITH 6 DRIVEN UPPER AND LOWER KNIVES. CROSS CUTTER WITH STRONG POWER, MADE IN 2012. VARIOUS VENTILATORS, CONDENSER, PIPES, PIPE SWITCHES, EVENTUALLY ALSO INCLUDING ELECTRO FORK LIFT WITH BALE CLAMP. THE LINE IS SUITABLE TO PROCESS WOOL AS WELL AS OTHER SHORT AND SHORTEST FIBERS, ALSO RECYCLED COTTON. CAPACITY OF THE LINE: APPROX. 350 TO 400 KG/H. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-9488 NONWOVEN LINES FOR GEOTEXTILES 3200mm TO 5000mm A) NEEDLING LINE FOR GEOTEXTILE B) NEEDLING LINE FOR GEOTEXTILE QUANTITY AVAILABLE: 2 Learn More