Search results for: 'electric p'

H-1305 BATT FEEDING SYSTEM - WORKING WIDTH 3000mm

WORKING WIDTH: 3000mm
CONTROL SYSTEM INCLUDED

COMPOSITION OF THE MACHINE:
- LOWER PVC INCLINED CONVEYOR BELT FOR THE TRANSPORT OF THE WEB FROM THE CROSS LAPPER TO THE ENTRANCE OF THE NEEDLE LOOM.
- UPPER PVC COMPRESSION BELT FOR THE PRE-COMPRESSION OF THE WEB BEFORE ENTERING THE FEEDING ROLLS.
- LOWER PVC CONVEYOR AND UPPER PVC BELT DRIVEN BY ONE GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- PAIR OF FEEDING ROLLS WITH PLASTIC FINGERS TO GUIDE THE COMPRESSED WEB CLOSE TO FIRST NEEDLE ZONE OF THE PRE-NEEDLE LOOM. ROLLER PAIR DRIVEN BY GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- BATT FEEDING SYSTEM INSTALLED ON RAIL SYSTEM AND EASY REMOVABLE FOR MAINTENANCE OF THE NEEDLE LOOM

TECHNICAL DATA:
ELECTRICAL INFORMATION:
ELECTRIC: MAIN VOLTAGE 400 V, 50 HZ, 3 PH.
CONTROL VOLTAGE: DC - 24 V / AC - 230 V
OTHER INFORMATION:
AIR PRESSURE (CONSTANT): MIN. 6 BAR (AT SITE)
OPERATOR SIDE LEFT OR RIGHT (IN WEB RUNNING DIRECTION)
LACQUER COATING:
MAIN COLOR OF THE MACHINES: RAL 7035 (LIGHT GREY)
CONTROL CABINET AND CONTROL DESK RAL 7035 (LIGHT GREY)
LABELING: ENGLISH
TECHNICAL DOCUMENTATION: ONE TIME ON CD-ROM (FURTHER SETS AVAILABLE AT ADDITIONAL COST)
LANGUAGE FOR OPERATING INSTRUCTIONS: ENGLISH
LANGUAGE FOR FURTHER DOCUMENTATION (SPARE PART LISTS, WIRING DIAGRAM, ETC): ENGLISH

ENVIRONMENTAL CONDITIONS:
INSTALLATION HEIGHT ABOVE SEA LEVEL: LESS THAN OR EQUAL TO 1,000 METERS
TEMPERATURE: 24° C (±2° C)
RELATIVE HUMIDITY: 65% (±5%)
ABSOLUTE WATER CONTENT: 9 TO 12 G/KG DRY AIR
NOTE: PLEASE MAKE SURE THAT THE TEMPERATURE INSIDE THE CONTROL CABINET DOES NOT EXCEED 450 CENTIGRADE. IN CASE OF EXCESSIVE ROOM TEMPERATURES WE RECOMMEND AN AIR-CONDITIONING SYSTEM FOR THE CONTROL CABINETS TO AVOID MALFUNCTION OF ELECTRICAL COMPONENTS

QUANTITY: 1

Learn More

V-1360 SANTEX THERMOBONDING COMPRESSION OVEN FOR NONWOVENS ON ROLL, 80 TO 400 G/M, YEAR 1986

WORKING WIDTH: 2500mm
ROLL FACE WIDTH: WORKING WIDTH + 50mm
MATERIAL FIBERS: NONWOVEN WEB OF POLYESTER OR DIFFERENT FIBERS MIXED WITH 10 TO 25% POLYESTER BI-COMPONENT BINDER FIBERS OR DIFFERENT BINDER FIBERS
MACHINE SPEED: 1 TO 20 M/MIN. (OTHERS UPON REQUEST)
COMPOSITION OVEN: 2 HEATING ZONES OF 2 M EACH + 1 COOLING SECTION

QUANTITY: 1

Learn More

C-3954 HUNTER PRE-NEEDLE LOOM, WIDTH 2500mm

HUNTER PRE-NEEDLE LOOM
BRAND: HUNTER
WIDTH: 2500mm
NEEDLING: ONE BOARD DOWN STROKE
NEEDLES: CA. 3000 NEEDLES/M
STROKES: 500 RPM
STROKE: 50mm INCLUDING ELECTRICAL CONTROL

QUANTITY: 1

Learn More

C-3939 BONINO CARDING MACHINE, WIDTH 3500mm

BONINO CARDING MACHINE
BRAND: BONINO
WIDTH: 3500mm

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-4398 (101048QEU9RX) K STRUCTURING NEEDLE LOOM PUNCH MACHINE YEAR 1974 WIDTH 4880mm STRUCTURING NEEDLE LOOM PUNCH MACHINE DR. ERNST FEHRER AG TYPE NL 11 WORKING WIDTH 4880mm YEAR 1974 LAMELLA GAUGE 4.7mm THE CONTROLS AND ELECTRIC BOARDS ARE NOT INCLUDED BECAUSE THE MACHINE WAS CONTROLLED BY A CENTRAL CONTROL FOR THE ENTIRE LINE TOTALLY 2 OR 3 SETS OF NEEDLE BOARDS CAN BE SUPPLIED WITH THE MACHINE THE MACHINE WAS PURCHASED AS SECOND-HAND APPROXIMATELY 7 YEARS AGO AND WAS USED FOR MAKING CARPETS SINCE THEN AS PER OPINION OF THE PLANT TECHNICIAN, THE MAIN BEARING IN THE HOUSING SHOULD BE OKAY. THE MACHINE WAS PURCHASED FROM A MULTINATIONAL COMPANY 7 YEARS AGO AND WAS IN GREAT CONDITION WHEN THE USED MACHINE CHANGED OWNER THE TOTAL INSIDE WIDTH IS 5178mm THE WIDTH ON WHICH THE NEEDLE BOARDS ARE DRILLED WITH HOLES FOR THE NEEDLES IS 4920mm. SO THIS IS THE TOTAL MAXIMUM WIDTH ON WHICH THE MATERIAL WOULD BE NEEDLE PUNCHED. NEEDLE BOARDS INSIDE THE MACHINE: 4 BOARDS ON ONE LINE. NUMBER OF NEEDLES PER METER: ESTIMATED TO BE 5,000 NEEDLES/M, BUT NEEDS TO BE CHECKED. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5184 (1313243YS12UF) L COSMETIC COTTON PAD MAKING MACHINE (24,000PCS/H) QUANTITY AVAILABLE: 1 Learn More

T-7956 HITECH FINE OPENER, WIDTH 1500mm, YEAR 2018 CONDITION: FULLY OPERATIONAL. NEW, MACHINE ON STANDBY QUANTITY: 1 Learn More

T-7953 SAMHWA HOPPER FEEDER, WIDTH 2400mm, YEAR 2017 PRESENT STATUS: FULLY OPERATIONAL QUANTITY: 1 Learn More

T-7949 NEEDLE PUNCHING MACHINE, WIDTH 3300mm QUANTITY: 1 Learn More

T-7947 CARDING MACHINE, WIDTH 60 INCHES WIRE MOUNTING: NO FEED CONTROL: ELECTRICAL QUANTITY: 2 Learn More