Search results for: 'heating w'

L-6683 DOUBLE BELT COMPRESSION THERMOBONDING OVEN SYSTEM 6000mm X 3300mm WIDE

INCLUDING:

THERMOBONDING OVEN
- DOUBLE COMPRESSION CONVEYORS SYSTEM SINGLE PASS
- DOUBLE BELT SOFT & HARD WADDING OVEN (6000mm LONG)
WORKING WIDTH: 3300mm
LENGTH OF HEATING CHAMBER: 6000mm
PANELS ARE 100mm THICK
TEMPERATURE INSIDE: UP TO 220 C
GAS BURNER 25 CUBIC METER PER HOUR DEPENDING ON MATERIAL THICKNESS
TWO GAS BURNERS ONE ON EACH SIDE 80 START AND 25 RUN CBM/H WITH MAINLINE 2 INCH
REDUCED TO 1” AT BURNER, PRESSURE 10 TO 15 KPascal
TWO HOT AIR FANS 22 KW EACH
ONE EXHAUST FAN 5.5 KW
WORKING SPEED: 1 TO 8 METERS PER MINUTE
DOUBLE TEFLON BELT WITH SINGLE PASS, WEAVE IS 2mm X 2mm
SUCTION HOOD AT THE ENTRANCE
THICKNESS OF FINAL PRODUCT 20 TO 150mm DEPENDING

COOLING UNIT
- FOUR COOLING PRESS ROLLERS 200mm diameter , 10mm shell thickness, with chiller
12,000 watt output power , input power 5700 watt , capacity 65 liter per minute
WORKING WIDTH: 3300mm
- LENGTHWISE CUTTER – 7 KNIVES ,pneumatically activated , BLADE DIAMETER 650mm
-SINGLE MOTOR
- MOVABLE SIDEWAYS
- CROSS CUTTER 2.2 KW MOTOR . UP TO 4 CUTS PER MINUTE
MAXIMUM LENGTH 2000mm
WORKING WIDTH: 2800mm
PVC CONVEYOR AT THE EXIT

ELECTRICAL CONTROL SYSTEM
-ELECTRICAL CABINET UL COMPONENTS

QUANTITY: 1

Learn More

REFERENCE NUMBER: R-6969
MAKE: GAMATEX
TYPE: BM 85
QUANTITY: 1

Learn More

M-6051 NEEDLE FELT / THERMOSET LINE, WIDTH 3000mm TO 4400mm, YEAR 1992 TO 2010

OFFER 001
NEEDLE FELT / THERMOSET LINE
WORKING WIDTH: 3200mm
WEIGHT: 60 TO 400 G/M2

OFFER 002
BONINO CARDING MACHINE
WORKING WIDTH: 3000mm

OFFER 003
AUTOMATEX CROSSLAPPER
WORKING WIDTH IN: 3000mm
WORKING WIDTH OUT: 4000mm

OFFER 004
FEHRER PRE-NEEDLING
YEAR: 1992
WORKING WIDTH: 4400mm

OFFER 005
BRUNATI DRYER
WORKING WIDTH IN: 3400mm
WORKING WIDTH OUT: 3400mm

OFFER 006
ORV SLITTING
WORKING WIDTH: 3600mm

OFFER 007
MT AUTOMATIC WINDER
YEAR: 2010
WORKING WIDTH: 3500mm

QUANTITY: 1 LINE

Learn More

M-6052 NEEDLE FELT / THERMOSET LINE, WORKING WIDTH 3000mm TO 3600mm, YEAR 1988

OFFER 001
NEEDLE FELT / THERMOSET LINE
WORKING WIDTH: 3200mm

OFFER 002
BEMATIC CARDING MACHINE
YEAR: 1988
WORKING WIDTH: 3000mm

OFFER 003
AUTOMATEX CROSSLAPPER
YEAR: 1988
WORKING WIDTH IN: 3000mm

OFFER 004
BRUNATI DRYER
WORKING WIDTH IN: 3400mm

OFFER 005
ORV SLITTING – WINDER
WORKING WIDTH: 3600mm

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: C-2476 NONWOVEN LINE FOR RUBBER-COIR MATERIALS DOA, WIDTH 1500mm TO 2150mm, YEAR 1994 SPECIFICATIONS: NONWOVEN LINE FOR RUBBER-COIR MATERIALS DOA WORKING WIDTH (ADJUSTABLE) 1500 TO 2150mm YEAR OF CONSTRUCTION 1994 SUITABLE FOR WEBS OF A SQUARE METER WEIGHT RANGE OF 150 - 1000 GR/SQM. HEATING OF THE OVEN BY SATURATED STEAM, 8 BAR. POWER REQUIREMENTS APPROX. 105 KW SPEED OF THE LINE: MAX. 15 M/MIN PRODUCTION CAPACITY MAX. 750 KG/H DEPENDING ON FIBERS. THE LINE IS CONSISTING OF: LAYING MACHINE TYPE 711 - 2200. THE WIDTH IS INFINITELY VARIABLE ADJUSTABLE FROM 1500 TO 2200 mm INFEED SYSTEM OF THE FLEECE LAYER WITH 6 ROLLERS MAGNET BAR SPRAYING AND DRYING LINE 737 + 745/310. MAX. 2200 mm WORKING WIDTH. RECIPE CONTROL. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5184 (1313243YS12UF) L COSMETIC COTTON PAD MAKING MACHINE (24,000PCS/H) QUANTITY AVAILABLE: 1 Learn More

WORKING WIDTH: 3.200 mm WEIGHT: 100 – 1000 G/M² CAPACITY: 600 KG/H COMPOSED OF: CARDING MACHINE CROSSLAPPER QUILT MACHINE THERMOSETTING OVEN 4X BURNER FOR AIR HEATING AND CIRCULATION SYSTEM 4X FAN WINDER ELECTRIC SYSTEM PIPING Learn More

REFERENCE NUMBER: M-5147 (1212NDTYXX11) L COTTON PAD MAKING MACHINE PUT ON MAKE-UP THE COTTON AND KAPOK PRODUCTION PROCESS: THE EQUIPMENT IS DIVIDES CUTS THE GOOD DEGREASING TO LAP, THE ADHESIVE-BONDED CLOTH OR THE GAUZE, LAYING ASIDE RAW MATERIAL AFTER THE COMPACTION, THE HEATING EMBOSSES, ROLLS CUTS PROCESS ONE TIME TO COMPLETE. MAIN FEATURE THE HIGH SPEED PUNCH PRESS REVOLVING BLANKING PRINCIPLE OF WORK, THE TECHNOLOGY IS MATURE, THE WORK IS STABLE, THE SERVICE WORK LOAD ARE FEW, OUTPUT MODE: THE PIPELINE ARRANGEMENT OUTPUT, THE CODE FALLS NEATLY, THE BAGGING IS CONVENIENT, A PERSON THEN OPERATES THE COMPLETE MACHINE, BIG REDUCED ARTIFICIAL AMOUNT OF USE; THE GOOD MAN-MACHINE OPERATION CONTACT SURFACE, MAY UNFOLD THE REAL TIME OPERATION INFORMATION, IS ADVANTAGEOUS FOR THE PRODUCTION MONITORING; THE MOLD REPLACEMENT IS CONVENIENT, THE CONSTRUCTION COST IS LOWER THAN GREATLY ROLLS CUTS THE CARVING FLOWER CUTTER BAR, MOREOVER AFTER THE MOLD WEARS, EASY TO REPAIR, DOES NOT NEED TO DISCARD THE REPLACEMENT, SAVES THE MAINTENANCE COST. PUT ON MAKE-UP THE COTTON AND KAPOK MAJOR TECHNIQUE PARAMETER: PRODUCTION SPEED: 20--30M/MIN PRODUCTION SPECIFICATION: MAY ACCORDING TO THE REQUEST ADJUSTMENT TOTAL POWER: 5KW MACHINE DIMENSION: 3.5M*1.7M*2.5M MODEL: A QUANTITY: 1 Learn More

REFERENCE NUMBER: A-1149 (1212225GHBP11RE) A NONWOVEN LINE FOR GEOTEXTIL PRODUCTION LINE, 6500mm, YEAR 2010 SPECIFICATION: FINAL FABRIC WIDTH: MAX. 6.500mm YEAR OF CONSTRUCTION: 2010 FIBERS: PP / PES BONDING: MECHANICAL (NEEDLING) WEIGHT RANGE: 80 – 1.500 G/M² CAPACITY: MAX. 1.000 KG/H 1) FIBER PREPARATION & BLENDING 2) CARDING GROUP 3) CROSS LAPPER 4) PRE - NEEDLE LOOM 5) FINISH – NEEDLE LOOM 6) CALENDAR 7) END-OF-LINE QUANTITY AVAILABLE: 1 Learn More