Search results for: 'line''

REFERENCE NUMBER: G-9488 NONWOVEN LINES FOR GEOTEXTILES 3200mm TO 5000mm A) NEEDLING LINE FOR GEOTEXTILE B) NEEDLING LINE FOR GEOTEXTILE QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: T-6868 NEEDLE PUNCH LINE, EXIT WIDTH 2200/2500mm, CAPACITY 400 KGS, OVERHAULED AND UPDATED 2012 AND 2015 NEEDLE PUNCH LINE EXIT WIDTH 2200/2500mm OVERHAULED AND UPDATED IN 2012/2015 TECHNOLOGY CONTROL BY S7 DESIGNED AND USED FOR NATURAL FIBRES, GLASS FIBRES, RECYCLED FIBRES 100% OR MIXED WITH PP FOR BASIC MATERIALS OF THE AUTOMOTIVE INDUSTRY CAPACITY: 400 KGS ITEM 001 2 BALE OPENER BRAND TEMAFA WORKING WIDTH: 1400mm WOODEN LATICE BELTS WOODEN TRANSPORT LATTICE VERY GOOD CONDITION INDIVIDUAL CONTROL OF OPENING AND MIXING ITEM 002 WILLOW BRAND TEMAFA 4 PAIRS STRIPPING AND WORKING ROLLERS WORKING WIDTH: 1400mm WITH VENTILATOR AND PIPE SYSTEM TO CHUTE FEED AND HOPPER FEEDER ITEM 003 CHUTE FEED BRAND TEMAFA WORKING WIDTH: 2700mm CONTROL OF FILLING HEIGHT BY ULTRASOUND SENSORS ITEM 004 HOPPER FEEDER BRAND OCTIR (RSP) GROUND BELT BY WOODEN LATTICE AND DRIVEN BY SEPARATE DRIVE VIA ECCENTRIC VIBRATION WALL MOBILE FRON WALL ITEM 005 CARDING MACHINE WORKING WIDTH: 2500mm 5 PAIRD STRIPPER AND WORKER INSTALLED 1 PAIR STRIPPER/WORKER SEPARATE DELIVERY INDIVIDUAL DRIVE SYSTEMS RIGID CARD CLOTHING MAIN DRUM 1600mm DIAMETER DOFFER DRUM 1200mm AND FLY COMB ITEM 006 CROSS LAPPER WEB FEEDING BY TRANSILON-BELTS EXIT BELT AS WOODEN LATTICE BELT ITEM 007 PRE-NEEDLE MACHINE BRAND DILO MODI DVM25 WORKING WIDTH: 2500mm ALL BELT SYSTEMS USE WOODEN LATTICE BELTS 1 NEEDLE BOARD NEEDLING FROM TOP TO BOTTOM ITEM 008 NEEDLE MACHINE BRAND ASSELIN WORKING WIDTH: 2200mm 4 NEEDLE BAR MACHINE (2 TOP/2 BOTTOM) ALTERNATING AND SIMULTANEOUS WORKING METHODS BY MODIFICATION OF DRIVING BELT WAYS PULL-OUT ROLLERS AT EXIT STROKE HEIGHT 40mm ITEM 009 ROLLING MACHINE 3 LONGITUDINAL CUTTER (TOP AND BOTTOM DRIVEN) 1 CROSS CUTTER CONTROL OF THE LINE: SEPARATE SYSTEM FOR BALE OPENING AND MIXING S7 CONTROL FOR COMPLETE LINE UPR TO DATE LEVEL, AIRCONDITIONED, CONTROL CABINETS CLOSE TO MACHINE OR SEPARATE MACHINES ARE IN VERY GOOD AND UPDATED CONDITION Learn More

REFERENCE NUMBER: T-6846 EDELMANN, SPINNBAU, TRUTZSCHLER NONWOVEN THERMOBONDING LINE, WORKING WIDTH 2500mm, YEAR 1993 BRAND: EDELMANN, SPINNBAU, TRUTZSCHLER SHORT DESCRIPTION: NONWOVEN THERMOBONDING LINE YEAR: 1993 NONWOVEN THERMOBONDING LINE WORKING WIDTH 2500mm BRAND: TRUTZSCHLER, SPINNBAU, RAMISCH KLEINEWEFERS, EDELMANN CONSISTING OF: 1X TRUTZSCHLER OPENING AND BLENDING LINE, YEAR 1993 1X TRUTZSCHLER FBK FEEDER, WORKING WIDTH 2500mm, YEAR 1993 1X SPINNBAU DOUBLE DOFFER CARD WITH ONE PAIR OF CONDENSING ROLLERS AT THE TOP AND THE BOTTOM, WORKING WIDTH 2500mm, YEAR 1993 1X RAMISCH KLEINEWEFERS HYDRAIN CALANDER, YEAR 1993 1X EDELMANN SLITTING AND WINDING STATION, YEAR 1993 QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6845 EDELMANN, SPINNBAU, TRUTZSCHLER NONWOVEN THERMOBONDING LINE, WORKING WIDTH 2500mm, YEAR 1993 TO 1994 BRAND: EDELMANN, SPINNBAU, TRUTZSCHLER SHORT DESCRIPTION: NONWOVEN THERMOBONDING LINE YEAR: 1993 TO 1994 NONWOVEN THERMOBONDING LINE WORKING WIDTH 2500mm BRAND: TRUTZSCHLER, SPINNBAU, RAMISCH KLEINEWEFERS, EDELMANN CONSISTING OF: 1X TRUTZSCHLER OPENING AND BLENDING LINE, YEAR 1993 1X TRUTZSCHLER FBK FEEDER, WORKING WIDTH 2000mm, YEAR 1994 1X TRUTZSCHLER FBK FEEDER, WORKING WIDTH 2500mm, YEAR 1994 1X SPINNBAU DOUBLE DOFFER RANDOM CARD, WORKING WIDTH 2500mm, YEAR 1994 2X RAMISCH KLEINEWEFERS HYDRAIN CALANDER, WORKING WIDTH 2500mm, YEAR 1994 1X EDELMANN SLITTING AND WINDING STATION, WORKING WIDTH 2500mm, YEAR 1994 QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6840 AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE BRAND: AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE CONSISTING OF: BLEND LINE, 60” WIDE, 4 HOPPERS WITH 12 HEAVY DUTY EXTENDED APRONS & NEW ELECTRONIC WEIGHING SYSTEM (2016). ALL MACHINES COMPLETELY RECONDITIONED IN 2016. OMMI STACK RESERVE, AUTOMATIC COMBO 332, YEAR 2000 SPINNBAU CARD, 2500mm, DOUBLE DOFFER, YEAR 1995, REPORTED ~1500 TO 1800 PPH CAPACITY DEPENDING UPON PRODUCT. AUTOMATEX FA/3000 TC CROSSLAPPER, YEAR 1997, AC DRIVES. BATT DRAFTER, 12 ROLLS. AUTOMATEX PR-100/T PRE-NEEDLER, 60mm STROKE, YEAR 1997 DRAFTER, 5 ROLLS. AUTOMATEX AG 154/TB NEEDLE LOOM, QUAD PUNCH, 50mm STROKE, YEAR 1997 FOUR ROLL STRETCH. METAL DETECTOR. ENTEX TENTER WITH VERTICAL IR HEAT BANKS, YEAR 1997 WINDER, YEAR 1997 PERKINS 4 ROLL CALENDER, NO STEEL ROLLS OR HEAT SYSTEM INCLUDED BUT MIGHT BE NEGOTIATED. EHHARDT+LEIMER GUIDER MODEL SE 11062, YEAR 2013 ENTEC WINDER, YEAR 1997 FINISHED WIDTH REPORTED OF 210" BUT COULD GO WIDER. LINE RAN PRIMARILY GEOTEXTILE & BEDDING PRODUCTS FROM 4.5 TO 10 OZ/YD. QUANTITY: 1 Learn More

M-1696 MARGASA COMPLETE RECYCLING/TEARING LINE, YEAR 2012, WORKING WIDTH 1500mm

2 ROTARY CUTTERS TYPE CMT-900, WORKING WIDTH 900mm, INCLUDING FEEDING CONVEYORS.
1 ELECTRONIC METAL DETECTOR, MOUNTED ON FEEDING CONVEYOR OF THE 1ST CUTTER.
1 PNEUMATIC MATERIAL TRANSPORT WITH SPECIAL FAN FOR RAGS ETC.
1 STATIONARY ZIG-ZAG HUMP MAGNET MOUNTED IN TUBE FOR MATERIAL TRANSPORT.
2 MIXING/ RELAXING STORAGE BINS FOR CUTTED RAGS WITH SPRAYING ROOM
IN FRONT OF:
1 FEEDING MACHINE TYPE CCS-1500, WORKING WIDTH 1500mm, AUTOMATIC PNEUMATIC FEEDING FROM STORAGE BINS, ELECTRONIC LEVEL CONTROL AND DOSING CONVEYOR TO TEARING LINE.
1 RAG TEARING LINE WITH 4 SECTIONS TYPE MASTER MCM-1550-DD, WORKING WIDTH 1500mm, TAMBOUR DIAM. 1000mm.
1 ELECTRONIC CONTROL PANEL FOR THE WHOLE LINE INCL. TOUCH SCREEN AND INVERTER DRIVER FOR SEVERAL MOTORS.
6 FILTER UNITS.

- ALL EQUIPMENT “AS NEW” SINCE RUNNING ONLY A FEW HOURS.
- CAPACITY UP TO 1000KG/HR.

Learn More

REFERENCE NUMBER: C-4010

NEEDLE PUNCHING PRODUCTION LINE, WORKING WIDTH 3000mm TO 6000mm, YEAR 2005

 

DETAILS:

 

OFFER 001

NEEDLE PUNCHING PRODUCTION LINE

YEAR: 2005

WORKING WIDTH: 6000mm

WEIGHT: 120 TO 800 G/M²

MATERIAL: PP, PES

CAPACITY: 600 KG/H

WITH FOLLOWING FIBERS:

6.7 DTEX

FIBER LENGTH: 60 TO 90mm

WORKING HOURS: CA. 41000 H

 

CONSISTS OF:

OFFER 002

BALE OPENER

MAKE: FALUBAZ

FEEDING TABLE: 1000mm WIDTH

2000mm LENGTH

WITH ELECTRONICALLY WEIGH BOXES

COLLECTING CONVEYOR

AND MIXING UNIT

QUANTITY: 4

 

OFFER 003

CHAMBER FIBER MIXING UNIT

QUANTITY: 6

 

OFFER 004

FINE OPENER

WITH METAL DETECTOR

QUANTITY: 1

 

OFFER 005

DUST COLLECTION UNIT

QUANTITY: 2

 

OFFER 006

FOR VOLUMETRIC HOPPER FEEDER

MAKE: FOR

TYPE: HF

QUANTITY: 1

 

OFFER 007

FOR CARDING MACHINE

MAKE: FOR

TYPE: WM 2+2

WORKING WIDTH: 3000mm

BREAST: 3X WORKERS / STRIPPERS

TAMBOUR: 4X WORKERS / STRIPPERS

DOUBLE DOOFER

CONDENSING SYSTEM

QUANTITY: 1

 

OFFER 008

AUTOMATEX CROSSLAPPER

MAKE: AUTOMATEX

TYPE: FA 5000/TC

WITH PROFILING

QUANTITY: 1

 

OFFER 009

ASSELIN WEB DRAFTER

MAKE: ASSELIN

TYPE: ETO-15

ROLLERS: 15

QUANTITY: 1

 

OFFER 010

AUTOMATEX PRE – NEEDLE LOOM

MAKE: AUTOMATEX

TYPE: PR160/T

NEEDING: DOUBLE BOARD DOWN

NEEDLES: 2X 8000 N/M

STROKE: 55mm

INCLUSIVE CBF FEEDING SYSTEM

QUANTITY: 1

 

OFFER 011

AUTOMATEX NEEDLE LOOM

MAKE: AUTOMATEX

TYPE: AG160/TB

NEEDING: 4 BOARD QUATTRO PUNCH

NEEDLES: 4X 8000 N/M

STROKE: 65mm

QUANTITY: 1

 

OFFER 012

BELMATEX ACCUMULATOR

MAKE: BELMATEX

QUANTITY: 1

 

OFFER 013

BELMATEX END OF LINE

MAKE: BELMATEX

SLITTER

WINDER

QUANTITY: 1

 

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: C-2480 NON-WOVEN LINE, WIDTH 1400mm, YEAR 1992 TO 2007 SPECIFICATIONS: NONWOVEN LINE YEAR OF CONSTRUCTION 1992 + 2007. THE LINE IS SUITABLE TO OPEN BALES AND TO PRODUCE A WEB FOR FILLING DISPOSABLE BED SHEETS. THE LINE IS CONSISTING OF: BALE OPENING MACHINE YEAR OF CONSTRUCTION 1992. WEB FORMING MACHINE BONINO. YEAR OF CONSTRUCTION 2007. WIDTH 1400 mm. CAPACITY 40 TO 50 METERS / MIN. END SECTION OF CARDING MACHINE TRAVERSI + ARMENTI. YEAR OF CONSTRUCTION 2007. MACHINE WIDTH 1500 mm. EXTRACTOR FAN. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-2477 THERMOBONDING LINE BEMATIC/BOMBI, WIDTH 2500mm, YEAR 2012 SPECIFICATIONS: THERMOBONDING LINE BEMATIC / BOMBI WORKING WIDTH 2500mm YEAR OF CONSTRUCTION 2012 THE CAPACITY IS APPROX. 500 KG/H MAX DEPENDING ON FIBERS ETC. THE LINE IS SUITABLE FOR A WEIGHT RANGE OF 80 TO 2000 GRAMS / SQM. THE FIBER LAYING CAN BE DONE IN RANDOM, HORIZONTAL OR VERTICAL DIRECTION. THE LINE IS CONSISTING OF: TWO BALE OPENERS FEEDING CONVEYOR BELT FINE OPENER FIBER BLENDING UNIT FEEDING UNIT WITH TWO INFEED ROLLS CARDING GROUP WITH INDEPENDENT MOTOR WITH VARIABLE SPEED CROSS LAPPER OVEN BOMBI COOLING SECTION 4 CUTTING UNITS WITH GUILLOTINE AND ROLLER SYSTEM CABLE ROOM AIR PASSAGES AND FILTERS CONTROL PANELS. QUANTITY AVAILABLE: 1 Learn More

J-3958 NONWOVEN AIRLAY LINE, WORKING WIDTH 2500mm, 15 METERS PER MINUTE QUANTITY: 1 Learn More