Search results for: 'new'

T-7956 HITECH FINE OPENER, WIDTH 1500mm, YEAR 2018 CONDITION: FULLY OPERATIONAL. NEW, MACHINE ON STANDBY QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6848 SPINNBAU CARDING LINE, YEAR 2013 BRAND: SPINNBAU SHORT DESCRIPTION: CARDING LINE YEAR: 2013 INSTALLED 2014 LIKE NEW, LITTLE RUN TIME 4 HOPPER TEMAFA BLEND LINE, 1600mm WIDE, 1 WITH CONDENSER FED FROM TRIM MACHINE CARDING WILLOW – 800mm WIDE FEED BELT AND 1200mm WIDE – TEMAFA TEMAFA MIXMASTER BLENDING BIN – 3000mm WIDE X 8000mm LONG X 4600mm HIGH (FILL HEIGHT 3000mm). 72 CUBIC METER CAPACITY. TEMAFA FINE OPENER – 2000mm WIDE WITH PINS 3000mm SPINNBAU CARD FEEDING UNIT – FEED TRUNK, VIBRATING CHUTE, WEIGHT BELT 708mm BREAST SECTION WITH 3 WORKERS AND STRIPPERS, 1500mm MAIN WITH 5 W/S AND (2) 708mm DOFFERS. 1 FOUNDATIONS AND PLATFORMS. DILO PROFILINE – BATT WEIGHT CONTROL SYSTEM MAHLO WEIGHT MEASURING UNIT – QUALISCAN CMS-12 DILO LAYER CROSSLAPPER – TYPE DLS 30/60 – 3000mm INFEED AND UP TO 6000mm LAYDOWN. MAX WEB HEIGHT 650mm. MAXIMUM SPEED 125M/MIN. SPINNBAU LAP DRAFTER TYPE VST 19 – MAX 6000mm WORKING WIDTH. 9 ROLLER PAIRS. LIFTING DEVICE TO ALLOW FOR 600mm CLEARANCE. 159mm ROLLER DIAMETER. INFEED HEIGHT 650 mm BRUCKNER THERMOBONDING OVEN – 5000mm OVEN WITH 3 HEATING AND 2 COOLING ZONE. MAGNETIC BELT. 3 NATURAL GAS MAXON BURNER. SLITTING – 9 POSITION BRUCKNER CRUSH CUTTER SLITTING HEADS. PNEUMATIC LIFTING. 450mm KNIFE DIAMETER CROSS CUTTER – ROTARY CUTTER STYLE WITH CLAMPING. CAPABLE OF 3 CUTS/MINUTES FOR MATERIALS UP TO 200mm THICK. WINDING – ASCENDING BATCH STYLE WINDER. MAX ROLL DIAMETER OF 1200mm. 3000mm DRIVEN FEED CONVEYOR. MANDREL GUIDANCE SYSTEM, MANUALLY ADJUSTABLE BRAKE SYSTEM FOR CONTROLLING TENSILE FORCE AND COMPACTION. TEMAFA FILTER HOUSE – TFS 50. MAX FLOW 50,000 CUBIC METER/H ELECTRICL INFO – 3 X 480V/60Hz. CONTROLS 110V AC/24 DC. SIEMENS PLC QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6840 AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE BRAND: AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE CONSISTING OF: BLEND LINE, 60” WIDE, 4 HOPPERS WITH 12 HEAVY DUTY EXTENDED APRONS & NEW ELECTRONIC WEIGHING SYSTEM (2016). ALL MACHINES COMPLETELY RECONDITIONED IN 2016. OMMI STACK RESERVE, AUTOMATIC COMBO 332, YEAR 2000 SPINNBAU CARD, 2500mm, DOUBLE DOFFER, YEAR 1995, REPORTED ~1500 TO 1800 PPH CAPACITY DEPENDING UPON PRODUCT. AUTOMATEX FA/3000 TC CROSSLAPPER, YEAR 1997, AC DRIVES. BATT DRAFTER, 12 ROLLS. AUTOMATEX PR-100/T PRE-NEEDLER, 60mm STROKE, YEAR 1997 DRAFTER, 5 ROLLS. AUTOMATEX AG 154/TB NEEDLE LOOM, QUAD PUNCH, 50mm STROKE, YEAR 1997 FOUR ROLL STRETCH. METAL DETECTOR. ENTEX TENTER WITH VERTICAL IR HEAT BANKS, YEAR 1997 WINDER, YEAR 1997 PERKINS 4 ROLL CALENDER, NO STEEL ROLLS OR HEAT SYSTEM INCLUDED BUT MIGHT BE NEGOTIATED. EHHARDT+LEIMER GUIDER MODEL SE 11062, YEAR 2013 ENTEC WINDER, YEAR 1997 FINISHED WIDTH REPORTED OF 210" BUT COULD GO WIDER. LINE RAN PRIMARILY GEOTEXTILE & BEDDING PRODUCTS FROM 4.5 TO 10 OZ/YD. QUANTITY: 1 Learn More

REFERENCE NUMBER: L-4307
WITH INCLINED APRON, DOUBLE-ROLL CLAMP, RECIPROCATING LAPPING, BOTTOM-APRON OUTLET
VERTICAL THICKNESS CONTROLLED BY RECIPROCATING LAPPING: 30mm TO 150mm
INPUT APRON WIDTH: 2700mm
INPUT APRON SPEED:≤40m/min (ADJUSTABLE)
OUTPUT APRON WIDTH: 2700mm
OUTPUT APRON SPEED:1 TO 12m/min (ADJUSTABLE)

Learn More

REFERENCE NUMBER: L-4869 

TRUTZSCHLER LINE, 100” WORKING WIDTH, YEAR 2005 – COMPLETE  

 

TRUTZSCHLER 

 

 

AUTOMATEX DOUBLE NEEDLE LOOM, GRADE “7”

 

TRUTZSCHLER OPENER/BLOWER, MODEL TF2500

TRUTZSCHLER FORMER, MODEL FD-U 1200

AUTOMATEX DOUBLE NEEDLE LOOM (3 YEAR OLD DC MOTOR AND NEW DC DRIVE)

HOT CALENDERS (INSTEAD OF OVEN)

COOLING ROLLERS

FR SPRAYER

SLITTER

GUILLOTINE

BUNTIUNG MAGNETIC METAL DETECTOR

PAD ROLLING UNIT

 

QUANTITY: 1

Learn More

M-1696 MARGASA COMPLETE RECYCLING/TEARING LINE, YEAR 2012, WORKING WIDTH 1500mm

2 ROTARY CUTTERS TYPE CMT-900, WORKING WIDTH 900mm, INCLUDING FEEDING CONVEYORS.
1 ELECTRONIC METAL DETECTOR, MOUNTED ON FEEDING CONVEYOR OF THE 1ST CUTTER.
1 PNEUMATIC MATERIAL TRANSPORT WITH SPECIAL FAN FOR RAGS ETC.
1 STATIONARY ZIG-ZAG HUMP MAGNET MOUNTED IN TUBE FOR MATERIAL TRANSPORT.
2 MIXING/ RELAXING STORAGE BINS FOR CUTTED RAGS WITH SPRAYING ROOM
IN FRONT OF:
1 FEEDING MACHINE TYPE CCS-1500, WORKING WIDTH 1500mm, AUTOMATIC PNEUMATIC FEEDING FROM STORAGE BINS, ELECTRONIC LEVEL CONTROL AND DOSING CONVEYOR TO TEARING LINE.
1 RAG TEARING LINE WITH 4 SECTIONS TYPE MASTER MCM-1550-DD, WORKING WIDTH 1500mm, TAMBOUR DIAM. 1000mm.
1 ELECTRONIC CONTROL PANEL FOR THE WHOLE LINE INCL. TOUCH SCREEN AND INVERTER DRIVER FOR SEVERAL MOTORS.
6 FILTER UNITS.

- ALL EQUIPMENT “AS NEW” SINCE RUNNING ONLY A FEW HOURS.
- CAPACITY UP TO 1000KG/HR.

Learn More

V-1280 DREF II, 12/E12, 10 INCH CYLINDRICAL, YEAR 1986

DREF II
12/E12
YEAR: 1986

QUANTITY: 1

Learn More

C-3933 FALUBAZ-BEFAMA CARDING WILLOW AB5G, WIDTH 1000mm, YEAR 1990

FALUBAZ-BEFAMA CARDING WILLOW
BRAND: FALUBAZ-BEFAMA
TYPE: AB5G
YEAR: 1990
WIDTH: 1000mm

QUANTITY: 1

Learn More

C-3948 ASSELIN T380, WIDTH 6000mm, YEAR 1984

ASSELIN T380
BRAND: ASSELIN
TYPE: T380
YEAR: 1984
WIDTH: 6000mm
INLET WIDTH 3000mm
DELIVERY SPEED: MAX. 80 M/MIN
CONVEYOR BELTS NEW
INCL. ELECTRICAL CABINET AND CONTROLS

QUANTITY: 1

Learn More

C-3939 BONINO CARDING MACHINE, WIDTH 3500mm

BONINO CARDING MACHINE
BRAND: BONINO
WIDTH: 3500mm

QUANTITY: 1

Learn More