Search results for: '100% R'

MAKE: LAROCHE
MODEL: SUPER OLYMPIC
WIDTH: 1500mm
YEAR: MID 1980’S
6 CYLINDERS EACH LINE
CYLINDER DIAMETER: 1000mm
ALL CYLINDERS ARE DESIGNED FOR PINNED LAGS AND THERE IS LIFE LEFT IN MOST OF THE LAGS SETS.
LAGS: (1) 8mm x 135, (1) 10mm x 160, (1) 12 x 166, (3) 13mm x 174
EACH CYLINDER FED BY A FEED ROLL TO FEED DISH COMBINATION AND THE FIBER IS TRANSFERRED TO THE FOLLOWING CYLINDER VIA A CONDENSING SECTION.
MOTORS: 3 x 150 HP 575 VOLT
TOTAL REQUIRED POWER: 875 AMPS
NEW CONTROLS WITH ABB DRIVES
FEED CHUTES
LUMMUS BALERS
PINNED CYLINDERS
TEMAFA BLENDING BINS
EXIT CONVEYORS
EACH SECTION EQUIPPED WITH ANSUL DRY POWDER FIRE PROTECTION SYSTEM THAT IS ACTIVATED FROM EMBER DETECTED IN THE DUCT REMOVAL PIPING.
LINES INCLUDE ALL NECESSARY FANS, MAGNETS, DUCTING AND WIRING

IN PERFECT WORKING ORDER

QUANTITY: 2 LINES

FOR NONWOVEN MATERIALS: SPUNBOND, MELTBLOW, SPUNLACE, AIRLAID, PPE, PS, PES, NYLON66, ARAMID ETC.
OIL ABSORBER, WATERPROOF, BREATHABLE COMPOSITES
TOTAL MATERIAL THICKNESS RANGE: 20gsm TO 55gsm

WORKING WIDTH: 1600mm
CAPACITY: 10 TO 100 METERS PER MINUTE
ONE PATTERN ROLLER
TITANIUM HORNS
ULTRASONIC SYSTEM 20 KHZ, 2000 WATTS (10 SETS)
PLC CONTROLS WITH TOUCH SCREEN
ELECTRICAL: 380 VOLTS, 3-PHASE, 28 KW
AIR: 6 BAR PER CM2 , 2 LITERS PER HOUR
OPTIONAL EXTRA PATTERN ROLLER AVAILABLE (PRICED SEPERATELY)
WITH CE CERTIFICATE, TOOL BOX, USER MANUAL

LEAD TIME: 110 DAYS

QUANTITY: 1

L-6683 DOUBLE BELT COMPRESSION THERMOBONDING OVEN SYSTEM 6000mm X 3300mm WIDE

INCLUDING:

THERMOBONDING OVEN
- DOUBLE COMPRESSION CONVEYORS SYSTEM SINGLE PASS
- DOUBLE BELT SOFT & HARD WADDING OVEN (6000mm LONG)
WORKING WIDTH: 3300mm
LENGTH OF HEATING CHAMBER: 6000mm
PANELS ARE 100mm THICK
TEMPERATURE INSIDE: UP TO 220 C
GAS BURNER 25 CUBIC METER PER HOUR DEPENDING ON MATERIAL THICKNESS
TWO GAS BURNERS ONE ON EACH SIDE 80 START AND 25 RUN CBM/H WITH MAINLINE 2 INCH
REDUCED TO 1” AT BURNER, PRESSURE 10 TO 15 KPascal
TWO HOT AIR FANS 22 KW EACH
ONE EXHAUST FAN 5.5 KW
WORKING SPEED: 1 TO 8 METERS PER MINUTE
DOUBLE TEFLON BELT WITH SINGLE PASS, WEAVE IS 2mm X 2mm
SUCTION HOOD AT THE ENTRANCE
THICKNESS OF FINAL PRODUCT 20 TO 150mm DEPENDING

COOLING UNIT
- FOUR COOLING PRESS ROLLERS 200mm diameter , 10mm shell thickness, with chiller
12,000 watt output power , input power 5700 watt , capacity 65 liter per minute
WORKING WIDTH: 3300mm
- LENGTHWISE CUTTER – 7 KNIVES ,pneumatically activated , BLADE DIAMETER 650mm
-SINGLE MOTOR
- MOVABLE SIDEWAYS
- CROSS CUTTER 2.2 KW MOTOR . UP TO 4 CUTS PER MINUTE
MAXIMUM LENGTH 2000mm
WORKING WIDTH: 2800mm
PVC CONVEYOR AT THE EXIT

ELECTRICAL CONTROL SYSTEM
-ELECTRICAL CABINET UL COMPONENTS

QUANTITY: 1

REFERENCE NUMBER: R-5864 
YAMADA SINGLE END SIZING 
MODEL: YS-6 
YEAR: 2006 
QUANTITY: 1 

REFERENCE NUMBER: M-7478
SIZING MACHINE 
MAKE: BENNINGER ZELL 
MODEL: A0015462 
YEAR: 1999 
SECTIONAL WARPING MACHINE 
MAKE: TECHMECH 
MODEL: SERVO TECH-130 
YEAR: 2013 
QUANTITY: 2

REFERENCE NUMBER: L-2926
1 X FIBER CARDING MACHINE
MODEL: 1001-560
1 X FIBER FEEDING MACHINE
MODEL: 503
1 X MIXING MACHINE
MODEL: 1003-B
2 X FILLING MACHINES
MODEL: 502
QUANTITY: 1 SET
FOAM SHREDDER
MODEL: 205
QUANTITY: 1

REFERENCE NUMBER: L-2533 
MODEL F-70

SIZES AVAILABLE:
1300 X 1000mm
1700 X 1300mm
2500 X 1600mm
3000 X 1600mm

QUANTITY: 1

REFERENCE NUMBER: R-6969
MAKE: GAMATEX
TYPE: BM 85
QUANTITY: 1

M-1696 MARGASA COMPLETE RECYCLING/TEARING LINE, YEAR 2012, WORKING WIDTH 1500mm

2 ROTARY CUTTERS TYPE CMT-900, WORKING WIDTH 900mm, INCLUDING FEEDING CONVEYORS.
1 ELECTRONIC METAL DETECTOR, MOUNTED ON FEEDING CONVEYOR OF THE 1ST CUTTER.
1 PNEUMATIC MATERIAL TRANSPORT WITH SPECIAL FAN FOR RAGS ETC.
1 STATIONARY ZIG-ZAG HUMP MAGNET MOUNTED IN TUBE FOR MATERIAL TRANSPORT.
2 MIXING/ RELAXING STORAGE BINS FOR CUTTED RAGS WITH SPRAYING ROOM
IN FRONT OF:
1 FEEDING MACHINE TYPE CCS-1500, WORKING WIDTH 1500mm, AUTOMATIC PNEUMATIC FEEDING FROM STORAGE BINS, ELECTRONIC LEVEL CONTROL AND DOSING CONVEYOR TO TEARING LINE.
1 RAG TEARING LINE WITH 4 SECTIONS TYPE MASTER MCM-1550-DD, WORKING WIDTH 1500mm, TAMBOUR DIAM. 1000mm.
1 ELECTRONIC CONTROL PANEL FOR THE WHOLE LINE INCL. TOUCH SCREEN AND INVERTER DRIVER FOR SEVERAL MOTORS.
6 FILTER UNITS.

- ALL EQUIPMENT “AS NEW” SINCE RUNNING ONLY A FEW HOURS.
- CAPACITY UP TO 1000KG/HR.

C-3796 MARGASA 4-DRUM TEARING LINE, WORKING WIDTH 900mm TO 1500mm, YEAR 2012

MARGASA 4-DRUM TEARING LINE
YEAR: 2012
WORKING WIDTH: 1500mm

CONSISTING OF:

MARGASA CMT-900 ROTARY CUTTERS
WORKING WIDTH: 900mm
QUANTITY: 2

METAL DETECTOR
QUANTITY: 1

PNEUMATIC TRANSPORT
QUANTITY: 1

MAGNETIC DUCT
QUANTITY: 1

BIG STORAGE BOX
QUANTITY: 1

FEEDING
QUANTITY: 1

MARGASA MASTER MCM-1500-DD 4-DRUM TEARING MACHINE
WORKING WIDTH: 1500mm
DRUM DIAMETER: 1000mm
WITH:
PRESSING ROLLER
WITH A LARGE DIAMETER TO COMPACT THE MATERIAL
BEFORE THE FIRST FEED ROLLER OF THE TEARING MACHINE
BEATERS THAT ELIMINATE THE FOREIGN SUBSTANCES
SUCH AS PLASTICS
WOODS
AND BUTTONS
THAT DUE TO WEIGHT HAVE FALLEN ON THE RETURN APRON
RETURN LATTICE
WITH MOTOR-REDUCER OF 1.5 KW
THAT DRIVES THE BIT RETURN LATTICES
OF THE MATERIAL TO BE RECYCLED
QUANTITY: 1

TAKES 4 CONTAINERS TO LOAD

QUANTITY: 1 LINE