Search results for: 'Double p'

C-3782 NEEDLING LINE, WORKING WIDTH 3000mm TO 8000mm, YEAR 2010

OFFER 001
NEEDLING LINE

OFFER 002
MTV CA 1500 BALE OPENERS

OFFER 003
BEMATIC BHL 2500 OPENER

OFFER 004
BEMATIC BSS BHL 3000 CARD

OFFER 005
TEXNOLOGY CROSS-LAPPER

OFFER 006
TECTEX NS 5000/50 PRE-NEEDLE LOOM

OFFER 007
TECTEX ANS 5000/120 S FINISHING NEEDLE LOOM

OFFER 008
SICAM CAL/NT/2 DOUBLE CYLINDER THERMOBONDING CALENDER

OFFER 009
TECHNOPLANTS CUTTING AND WINDING UNIT

QUANTITY: 1 LINE

Learn More

M-1519 NONWOVEN PRODUCTION LINE WIDTH 7000mm YEAR 2004

OFFER 001
MASIAS HOPPER FEEDER

OFFER 002
MASIAS CARDING MACHINE

OFFER 003
PRE-NEEDLE LOOM

OFFER 004
FINISH NEEDLE LOOM

OFFER 005
AUTOMATEX ACCUMULATOR

OFFER 007
AUTOMATEX LONGITUDINAL AND CROSS CUTTER

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: C-3784 NEEDLING LINE, WORKING WIDTH 2500mm TO 7400mm, YEAR 1994 TO 1997 DETAILS: OFFER 001 NEEDLING LINE YEAR: 1994 TO 1997 WORKING WIDTH: 6500mm CONSISTING OF: OFFER 002 HERGETH DOUBLE DOFFER CARD YEAR: 1997 WORKING WIDTH: 2500mm AVANTRAIN + 1 SWIFT UP TO 950 KG/H QUANTITY: 1 OFFER 003 ASSELIN 658 PROFILE CROSS-LAPPER YEAR: 1994 INPUT: 2500mm OUTPUT: 6800mm UP TO 120 M/MIN QUANTITY: 1 OFFER 004 FEHRER NL9 PRE-NEEDLE LOOM YEAR: 1994 WORKING WIDTH: 7400mm DOWNSTROKE STROKE: 60mm 2658 NEEDLES/M QUANTITY: 1 OFFER 005 FEHRER NL42 FINISHING NEEDLE LOOM YEAR: 1994 WORKING WIDTH: 7000mm UPSTROKE & DOWNSTROKE STROKE: 70mm 9702 NEEDLES/M QUANTITY: 1 OFFER 006 WINDING UNIT YEAR: 1994 WORKING WIDTH: 7000mm QUANTITY: 1 QUANTITY AVAILABLE: 1 LINE Learn More

REFERENCE NUMBER: V-1045 THIBEAU CARDING MACHINE WORKING WIDTH: 2,500mm SPECIFICATIONS: MAKE: THIBEAU TYPE: CA5 Y.O.C.: 1984 – 1985 WORKING WIDTH: 2,500mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-2481 NONWOVEN LINE FOR WOOLEN INSULATION MATERIAL, WIDTH 2500mm, YEAR 2007 TO 2012 SPECIFICATIONS: NONWOVEN LINE FOR WOOLEN INSULATION MATERIAL YEAR OF CONSTRUCTION: VARIOUS, PLEASE SEE BELOW. THE LINE IS CONSISTING OF: BALE OPENER WITH CARDING WILLOW. METAL SEPARATOR MADE IN APPROX. 2007. PASS THROUGH CLEANER MADE IN APPROX. 2007. HOPPER FEEDER WITH FINE OPENER, RECONDITIONED EQUIPMENT. 2 LARGE BLENDING BINS WITH BIN EMPTIER, RECONDITIONED IN 2009. COMPLETE SUCTION AND AIR FILTRATION UNIT WITH DRUM FILTER AND COARSE FIBER PRE FILTER WITH FIBRE COMPACTOR AS WELL AS FINE DUST SEPARATOR. HOPPER FEEDER WITH RESERVE CHUTE. AIRLAY LINE MADE IN 2011. 2500 mm WORKING WIDTH. DOUBLE BAND OVEN MADE IN 2010, VERY EFFICIENT. LONGITUDINAL CUTTING DEVICE WITH 6 DRIVEN UPPER AND LOWER KNIVES. CROSS CUTTER WITH STRONG POWER, MADE IN 2012. VARIOUS VENTILATORS, CONDENSER, PIPES, PIPE SWITCHES, EVENTUALLY ALSO INCLUDING ELECTRO FORK LIFT WITH BALE CLAMP. THE LINE IS SUITABLE TO PROCESS WOOL AS WELL AS OTHER SHORT AND SHORTEST FIBERS, ALSO RECYCLED COTTON. CAPACITY OF THE LINE: APPROX. 350 TO 400 KG/H. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-1159 SPINNBAU NON WOVEN CARDING MACHINE, YEAR 1989, WIDTH 3000MM QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5266 (1313236LH12RX) L MULLER NF 53 NEEDLE LOOM MULLER NF 53 FULLY RECONDITIONED NEEDLE LOOMS SHED MOTION: NORMAL # OF HARNESSES: 12 FRAMES INCORPORATED TAKE DOWN: DOUBLE KNURLED STEEL BINDER THREAD: SYSTEM III WEFT FEED: MUTRAN II PRODUCTION MONITOR: 3 SHIFT PICK CLOCK PICK REPEAT: 8 – 48 PICK CHAIN LINK DRIVE: BRAKE MOTOR / SLOW MOTION POWER: 230/240 VOLT 3 PHASE 60HZ ACCESSORIES: 4 RAIL STOP MOTION, CONE HOLDERS, HEDDLES & DROP WIRES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5221 (1313565TNY12RX) L
NONWOVEN LINE WIDTH 2500mm

CARD FEEDING
CARDING

QUANTITY AVAILABLE: 1

Learn More

MODEL: BG-450 NEEDLING SPEED: 0 TO 1000 RPM DOWN STROKE 60mm NEEDLE DENSITY: 5000 NEEDLES PER LINEAR METER PINHOLE DIAMETER: Ø1.83mm ACTUAL WIDTH OF NEEDLE PLATE: 4500mm STRIP PLATE AND SCREEN PLATE: ALL PINHOLES ARE BEVELLED, SURFACE CHROME-COATED, COMPUTERIZED DRILLING FEED SPEED: 0.6 TO 6M/MIN (NORMALLY BETWEEN 2.5 AND 4M/MIN) MAIN MOTOR: 22KW INVERTER CONTROL FEEDING AND DISCHARGING MOTOR: 2.2KW EACH, INVERTER CONTROL MOTORS FOR STRIP PLATE AND SCREENING PLATE: 1.5KW×2, POWER-DRIVEN WORM-GEAR LIFT, WITH RULER AND TRAVEL SWITCHES PVC APRON FEEDING, CHROM-COATED DOUBLE-ROLLER DISCHARGING UP AND DOWN CONTROL: PNEUMATIC CONTROL TOTAL POWER: 27.2KW QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5138 (12121745V11UX) L SQUARE COTTON PAD PRODUCTION MACHINE MODEL: XF SPEED: 1800 TO 3000 PCS/MINUTE PRODUCT SIZE: WIDTH: 40 TO 100mm, LENGTH 40 TO 100mm RAW MATERIAL SIZE: 1000mm, DIAMETER LESS THAN 1000mm POWER: 380V FREQUENCY: 50 HZ TOTAL POWER: 4.5KW DIMENSION: LENGTH: 2500mm, WIDTH: 1900mm, HEIGHT: 1600mm WEIGHT: 2500KG QUANTITY AVAILABLE: 1 Learn More