Search results for: 'Reference+No'

H-1305 BATT FEEDING SYSTEM - WORKING WIDTH 3000mm

WORKING WIDTH: 3000mm
CONTROL SYSTEM INCLUDED

COMPOSITION OF THE MACHINE:
- LOWER PVC INCLINED CONVEYOR BELT FOR THE TRANSPORT OF THE WEB FROM THE CROSS LAPPER TO THE ENTRANCE OF THE NEEDLE LOOM.
- UPPER PVC COMPRESSION BELT FOR THE PRE-COMPRESSION OF THE WEB BEFORE ENTERING THE FEEDING ROLLS.
- LOWER PVC CONVEYOR AND UPPER PVC BELT DRIVEN BY ONE GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- PAIR OF FEEDING ROLLS WITH PLASTIC FINGERS TO GUIDE THE COMPRESSED WEB CLOSE TO FIRST NEEDLE ZONE OF THE PRE-NEEDLE LOOM. ROLLER PAIR DRIVEN BY GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- BATT FEEDING SYSTEM INSTALLED ON RAIL SYSTEM AND EASY REMOVABLE FOR MAINTENANCE OF THE NEEDLE LOOM

TECHNICAL DATA:
ELECTRICAL INFORMATION:
ELECTRIC: MAIN VOLTAGE 400 V, 50 HZ, 3 PH.
CONTROL VOLTAGE: DC - 24 V / AC - 230 V
OTHER INFORMATION:
AIR PRESSURE (CONSTANT): MIN. 6 BAR (AT SITE)
OPERATOR SIDE LEFT OR RIGHT (IN WEB RUNNING DIRECTION)
LACQUER COATING:
MAIN COLOR OF THE MACHINES: RAL 7035 (LIGHT GREY)
CONTROL CABINET AND CONTROL DESK RAL 7035 (LIGHT GREY)
LABELING: ENGLISH
TECHNICAL DOCUMENTATION: ONE TIME ON CD-ROM (FURTHER SETS AVAILABLE AT ADDITIONAL COST)
LANGUAGE FOR OPERATING INSTRUCTIONS: ENGLISH
LANGUAGE FOR FURTHER DOCUMENTATION (SPARE PART LISTS, WIRING DIAGRAM, ETC): ENGLISH

ENVIRONMENTAL CONDITIONS:
INSTALLATION HEIGHT ABOVE SEA LEVEL: LESS THAN OR EQUAL TO 1,000 METERS
TEMPERATURE: 24° C (±2° C)
RELATIVE HUMIDITY: 65% (±5%)
ABSOLUTE WATER CONTENT: 9 TO 12 G/KG DRY AIR
NOTE: PLEASE MAKE SURE THAT THE TEMPERATURE INSIDE THE CONTROL CABINET DOES NOT EXCEED 450 CENTIGRADE. IN CASE OF EXCESSIVE ROOM TEMPERATURES WE RECOMMEND AN AIR-CONDITIONING SYSTEM FOR THE CONTROL CABINETS TO AVOID MALFUNCTION OF ELECTRICAL COMPONENTS

QUANTITY: 1

V-1360 SANTEX THERMOBONDING COMPRESSION OVEN FOR NONWOVENS ON ROLL, 80 TO 400 G/M, YEAR 1986

WORKING WIDTH: 2500mm
ROLL FACE WIDTH: WORKING WIDTH + 50mm
MATERIAL FIBERS: NONWOVEN WEB OF POLYESTER OR DIFFERENT FIBERS MIXED WITH 10 TO 25% POLYESTER BI-COMPONENT BINDER FIBERS OR DIFFERENT BINDER FIBERS
MACHINE SPEED: 1 TO 20 M/MIN. (OTHERS UPON REQUEST)
COMPOSITION OVEN: 2 HEATING ZONES OF 2 M EACH + 1 COOLING SECTION

QUANTITY: 1

P-1166 ASSELIN CROSS LAPPER PROFILE, WIDTH 5000mm, YEAR 1999

ASSELIN CROSS LAPPER PROFILE
YEAR: 1999
WIDTH: 5000mm
INFEED WIDTH: 3000mm
RECOMMEND TO RENEW BOSCH DRIVES
MACHINE IS DISMANTLED
BELTS WERE CUT AND NOT AVAILABLE

QUANTITY: 1

C-4037 TSUDAKOMA ZAX AIR JET LOOM R-190CM, WORKING WIDTH 1900mm, YEAR 2002, CAM, 2 COLORS

TSUDAKOMA ZAX AIR JET LOOM
TYPE: R-190CM
YEAR: 2002
RUNNING CONDITION
WORKING WIDTH: 1900mm
FDP SENSOR FOR 2 COLORS
WBS (WEFT BRAKE SYSTEM)
STRETCH NOZZLE
INCLINED CLOTH FELL WITH TOP MOUNTED TEMPLE
INDEPENDENT SUB NOZZLE TIMING CONTROL
BLANK START CONTROL
CAM MOTION STAUBLI

QUANTITY: 36

C-4033 NSC PB 30 LF 700/1000 WITH CRIMPER BOX

NSC PB 30 LF 700/1000
WITH CRIMPER BOX
RUNNING SPEEDS: 175 TO 190 AND 210 CYCLES PER MINUTE
DRIVE BY INDIVIDUAL NOTOR: 2.4 KW – 1500 RPM
FEEDIN: CANS OR BALLS CREELS DOUBLING 16 TO 24 WITH STOP MOTIONS41

QUANTITY: 1 SET

C-4032 NSC PB 29 LF 700/1000 WITH CRIMPER BOX

NSC PB 29 LF 700/1000
WITH CRIMPER BOX
RUNNING SPEEDS: 175 TO 190 AND 210 CYCLES PER MINUTE
DRIVE BY INDIVIDUAL NOTOR: 2.4 KW – 1500 RPM
FEEDIN: CANS OR BALLS CREELS DOUBLING 16 TO 24 WITH STOP MOTIONS41

QUANTITY: 1 SET

C-4025 MURATA LINKED CONER WITH 28 DRUMS, YEAR 1989

MURATA LINKED CONER
YEAR: 1989
28 DRUMS
STEEL DRUM (NO CERAMIC GUIDE): 2W
YOLK CREDLE
CONE ANGLE: 5 DEG’ 57’

QUANTITY: 10 SETS

REFERENCE NUMBER: M-6089
LLORPIC 500mm WIDE ROTARY CUTTER WITH 4 BLADES

ROTARY CUTTING MACHINE
MAKE: LLORPIC
WIDTH: 500mm

QUANTITY: 1

REFERENCE NUMBER: V-1277
TAYLOR STILES ENVIROTECH 536 ROTARY CUTTER

(2) 36" BLADES, ~16' INFEED AND 8' DISCHARGE CONVEYORS

QUANTITY: 1

M-6053 SPUNBOND PRODUCTION LINE, WORKING WIDTH 4040mm TO 4500mm

OFFER 001
SPUNBOND PRODUCTION LINE
WORKING WIDTH: 4040mm
WEIGHT: 130 TO 250 G/M2

OFFER 002
POLYMER CLEANING GROUP

OFFER 003
CRYSTALLIZING GROUP

OFFER 004
DRYING GROUP

OFFER 005
PNEUMATIC CONVEYING SYSTEM

OFFER 006
EXTRUDER HOPPER

OFFER 007
EXTRUDER

OFFER 008
FILTERING UNIT

OFFER 009
MELT TRANSFER LINE

OFFER 010
SPINNING BEAM

OFFER 011
SPINNING PACKS

OFFER 012
FILAMENTS QUENCHING SYSTEM

OFFER 013
FILAMENTS DRAWING AND DISTRIBUTION SYSTEM

OFFER 014
WEB FORMING CONVEYOR BELT

OFFER 015
CREEL FOR APPLICATION OF REINFORCING FILAMENTS

OFFER 016
PRE-NEEDLING MACHINE

OFFER 017
NEEDLING MACHINE

OFFER 018
THERMOSETTING UNIT

OFFER 019
OUTLET CALENDER

OFFER 020
FOULARD

OFFER 021
BINDER PREPARATION SYSTEM

OFFER 022
DRYER

OFFER 023
OUTLET CALENDER

OFFER 024
AUTOMATIC WINDER

OFFER 025
AIR COMPRESSORS (FOR FILAMENTS STRETCHING EJECTORS)

OFFER 026
DIATHERMIC OIL HEATING SYSTEM

OFFER 027
CHILLED WATER CIRCULATION AND GENERATION SYSTEM

OFFER 028
EQUIPMENT FOR CLEANING CYCLE, SPECIAL TOOLS

OFFER 029
FIBRE DUST RECOVERY SYSTEM

OFFER 030
EDGES RECOVERY SYSTEM

OFFER 031
SPINNING SECTION STEEL STRUCTURE

OFFER 032
DISTRIBUTION ELECTRIC CABINETS

OFFER 033
PROCESS ELECTRIC SYSTEM OF EXISTING MACHINES ACCORDING TO THE ACTUAL LAYOUT

OFFER 034
CABLES AND CABLING MATERIALS

QUANTITY: 1 LINE