Search results for: 'av-2''

H-1305 BATT FEEDING SYSTEM - WORKING WIDTH 3000mm

WORKING WIDTH: 3000mm
CONTROL SYSTEM INCLUDED

COMPOSITION OF THE MACHINE:
- LOWER PVC INCLINED CONVEYOR BELT FOR THE TRANSPORT OF THE WEB FROM THE CROSS LAPPER TO THE ENTRANCE OF THE NEEDLE LOOM.
- UPPER PVC COMPRESSION BELT FOR THE PRE-COMPRESSION OF THE WEB BEFORE ENTERING THE FEEDING ROLLS.
- LOWER PVC CONVEYOR AND UPPER PVC BELT DRIVEN BY ONE GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- PAIR OF FEEDING ROLLS WITH PLASTIC FINGERS TO GUIDE THE COMPRESSED WEB CLOSE TO FIRST NEEDLE ZONE OF THE PRE-NEEDLE LOOM. ROLLER PAIR DRIVEN BY GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- BATT FEEDING SYSTEM INSTALLED ON RAIL SYSTEM AND EASY REMOVABLE FOR MAINTENANCE OF THE NEEDLE LOOM

TECHNICAL DATA:
ELECTRICAL INFORMATION:
ELECTRIC: MAIN VOLTAGE 400 V, 50 HZ, 3 PH.
CONTROL VOLTAGE: DC - 24 V / AC - 230 V
OTHER INFORMATION:
AIR PRESSURE (CONSTANT): MIN. 6 BAR (AT SITE)
OPERATOR SIDE LEFT OR RIGHT (IN WEB RUNNING DIRECTION)
LACQUER COATING:
MAIN COLOR OF THE MACHINES: RAL 7035 (LIGHT GREY)
CONTROL CABINET AND CONTROL DESK RAL 7035 (LIGHT GREY)
LABELING: ENGLISH
TECHNICAL DOCUMENTATION: ONE TIME ON CD-ROM (FURTHER SETS AVAILABLE AT ADDITIONAL COST)
LANGUAGE FOR OPERATING INSTRUCTIONS: ENGLISH
LANGUAGE FOR FURTHER DOCUMENTATION (SPARE PART LISTS, WIRING DIAGRAM, ETC): ENGLISH

ENVIRONMENTAL CONDITIONS:
INSTALLATION HEIGHT ABOVE SEA LEVEL: LESS THAN OR EQUAL TO 1,000 METERS
TEMPERATURE: 24° C (±2° C)
RELATIVE HUMIDITY: 65% (±5%)
ABSOLUTE WATER CONTENT: 9 TO 12 G/KG DRY AIR
NOTE: PLEASE MAKE SURE THAT THE TEMPERATURE INSIDE THE CONTROL CABINET DOES NOT EXCEED 450 CENTIGRADE. IN CASE OF EXCESSIVE ROOM TEMPERATURES WE RECOMMEND AN AIR-CONDITIONING SYSTEM FOR THE CONTROL CABINETS TO AVOID MALFUNCTION OF ELECTRICAL COMPONENTS

QUANTITY: 1

Learn More

C-4188 DILO DI-LOOM CYCLOPUNCH OUG-II CPSGL FINISHING NEEDLE LOOM, WORKING WIDTH 2500mm, YEAR 2007

DILO DI-LOOM CYCLOPUNCH OUG-II CPSGL FINISHING NEEDLE LOOM
YEAR: 2007
WORKING WIDTH: 2500mm
EACH NEEDLE LOOM IS AVAILABLE SEPARATELY
2 BOARDS FROM THE TOP
2 BOARDS FROM THE BOTTOM

QUANTITY: 2

Learn More

C-3990 HYUNDAI HIMSEN 9H25/33 HFO POWER PLANT, CAPACITY 10.5 MW, YEAR 2014 - NEW

MAKE/MODEL: HYUNDAI HIMSEN 9H25/33
HFO POWER PLANT
CAPACITY: 10.5 MW
WATTAGE: 46,200 KW
YEAR: 2014
HOURS: NEW
FUEL TYPE: HFO
FREQUENCY: 50 HZ
ENCLOSURE: SOUND ATTENUATED ENCLOSURE
MANUFACTURER: HHI
ENGINE MODEL: HYUNDAI HIMSEN 9H25/33
GENERATOR MODEL: HYUNDAI
FOR 50HZ: 2100KW, 6000V, 750 RPM

QUANTITY: 5

Learn More

P-3227 STRUCTURING NEEDLE LOOM, WIDTH 2500mm

STRUCTURING NEEDLE LOOM
WIDTH: 2500mm
LAMELLA GUAGE 4.7mm

QUANTITY: 2

Learn More

M-5641 NEEDLE PUNCHING PRODUCTION LINE, WIDTH 5000mm, YEAR 1984 TO 1994

OFFER 001
NEEDLE PUNCHING PRODUCTION LINE

OFFER 002
ROLANO BALE OPENER

OFFER 003
FOR CARDING MACHINE

OFFER 004
THICKNESS CONTROL

OFFER 005
FOR CROSSLAPPER

OFFER 006
FEHRER NEEDLE LOOM

OFFER 007
MENZEL WINDER

OFFER 008
LAROCHE FLEECE OPENER

QUANTITY: 1

Learn More

C-3792 FEHRER NL21 FINISHING NEEDLE LOOM, WORKING WIDTH 3400mm TO 4000mm, YEAR 1985

FEHRER NL21 FINISHING NEEDLE LOOM
YEAR: 1985
YEAR REFURBISHED: 2004
WORKING WIDTH: 3400mm (1ST MACHINE)
WORKING WIDTH: 4000mm (2ND MACHINE)

QUANTITY: 2

Learn More

REFERENCE NUMBER: C-1866 HORIZONTAL CROSS LAPPER, WIDTH 4700mm, WITH CONVEYOR SPEED MAX 80 M/MIN (NEW) DETAILS: HORIZONTAL CROSS LAPPER SHCH4 90” M/C DIMENSION: 3400W X 8000L X 1900H mm LAYING WIDTH: 2300mm WORKING WIDTH: 4700mm CONVEYOR SPEED: MAXIMUM 80 m/min CONVEYOR MATERIAL: SIEGRING (MADE IN GERMANY) DRIVE: A.MAIN MOTOR: 7.5 HP (SERVO MOTOR) -1 B.CARRIAGE MOTOR: 7.5 Hp (SERVO MOTOR) -2 C. UNDER LATTICE MOTOR: 1 HP (AC INVERTER, GEAR REDUCER)-1 D. UNDER LATTICE UP/DOWN: 1 HP (GEAR REDUCER) -1 MACHINE HAS PROFILING CONTROL QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-2479 NONWOVEN LINE, WIDTH 2500mm, CROSS LAPPER WIDTH 6000mm, GAS OVEN 3400mm SPECIFICATIONS: NONWOVEN LINE THE LINE IS CONSISTING OF: 1 PC. CARDING MACHINE, 2500 MM WORKING WIDTH. 1 PC. CROSS LAPPER HERGETH, 6000 MM WORKING WIDTH. 1 PC. GAS HEATED 3-FLOOR OVEN MARIO BOMBI, 3400 MM WIDTH. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-2477 THERMOBONDING LINE BEMATIC/BOMBI, WIDTH 2500mm, YEAR 2012 SPECIFICATIONS: THERMOBONDING LINE BEMATIC / BOMBI WORKING WIDTH 2500mm YEAR OF CONSTRUCTION 2012 THE CAPACITY IS APPROX. 500 KG/H MAX DEPENDING ON FIBERS ETC. THE LINE IS SUITABLE FOR A WEIGHT RANGE OF 80 TO 2000 GRAMS / SQM. THE FIBER LAYING CAN BE DONE IN RANDOM, HORIZONTAL OR VERTICAL DIRECTION. THE LINE IS CONSISTING OF: TWO BALE OPENERS FEEDING CONVEYOR BELT FINE OPENER FIBER BLENDING UNIT FEEDING UNIT WITH TWO INFEED ROLLS CARDING GROUP WITH INDEPENDENT MOTOR WITH VARIABLE SPEED CROSS LAPPER OVEN BOMBI COOLING SECTION 4 CUTTING UNITS WITH GUILLOTINE AND ROLLER SYSTEM CABLE ROOM AIR PASSAGES AND FILTERS CONTROL PANELS. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5392 (22065DTY1R) C TRUTZSCHLER FIBER OPENING AND BLENDING LINE FOR NONWOVENS YEAR 1994 CONSISTING OF: - 1 TRUTZSCHLER FIBER PREPARATION MACHINE, TYPE BOAL 1200 - 1 TRUTZSCHLER OPENER, TYPE VFO 1200 - 3 TRUTZSCHLER CONDENSERS, TYPE LVSA - 1 TRUTZSCHLER MATERIAL BIN, TYPE MSV - 3 TRUTZSCHLER VENTILATORS, TYPE TVF 425 - 1 TRUTZSCHLER MULTI MIXER, TYPE MPM 6/1400 - 1 TRUTZSCHLER BALE OPENER, TYPE BEC 1200 - 1 TRUTZSCHLER OPENER, TYPE SFO 12 QUANTITY AVAILABLE: 1 Learn More