Search results for: 'Loo'

T-7943 DILO NEEDLE PUNCHING MACHINE – PRE AND FINISH NEEDLER, WIDTH 3600mm TO 4100mm, YEAR 1986 ITEM 001 DILO NEEDLE PUNCHING MACHINE - PRE NEEDLER, WIDTH 4100mm, YEAR 1986 CONDITION / STATUS: IN OPERATION QUANTITY: 1 ITEM 002 DILO NEEDLE PUNCHING MACHINE - FINISH NEEDLER, WIDTH 3600mm, YEAR 1986 CONDITION / STATUS: IN OPERATION QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6989 NONWOVEN FABRIC PRODUCTION PLANTS WITH MALIWATT AND MALIVLIES 3600mm GAUGE 14 AND 7 ITEM 001 PRODUCTION PLANT OF NON-WOVEN FABRIC PLANT IS COMPLETE IN AN EXCELLENT STATE OF MAINTENANCE WITH DRUMS OF 2000mm IN DIAMETER LIKE THE SAME DIAMETER DOFFERS, HIGH WORK 2200mm, 2500 X 4200mm, ALL MACHINES ARE ELECTRONICALLY MANAGED BY PLC, WEIGHT SCALE WITH LOAD CELLS, IT IS THERE IS ALSO THE COMPLETE AUTOMATED FIBER PREPARATION IN ADDITION, THERE IS 1 LOOM FOR NONWOVEN MALIWATT WITH THREAD AND 1 MALIVLIES LOOM WITHOUT SEWING THREAD INTERTWINES THE FIBERS AND PRODUCES A NON-WOVEN FABRIC ALSO USED FOR THE PRODUCTION OF ANTI-COVID-19 FACIAL MASKS FABRIC PRODUCTION PLANTS IN BLOCK FABRIC OR FOR SINGLE UNITS IN GOOD CONDITION AND STILL IN PRODUCTION TODAY THE DESCRIPTION OF THE PLANTS BELOW: ITEM 002 MALIWATT 3600 TYPE 14013 GAUGE 14 YEAR OF CONSTRUCTION 1980 FOR MODEL CARD WORKING HEIGHT 2200mm DRUM DIAMETER 1700mm DOFFER 1270mm, RIGID FRONT GASKET AND 1ST ELASTIC CARD, ORDINARY FINENESS, THE LINE IS COMPOSED OF SILOS, AVAN TRAIN LOADER AND ONE CARD, CROSS LAPPER CORMATEX SAGITTARIO LINE, FIBER USED MIXED POLYESTER AND VISCOSE 70/30% FIBER LENGTH 60mm, 3.4 DTEX, PLANT IN GOOD CONDITION QUANTITY: 2 ITEM 003 MALIWATT 3600 TYPE 14013 GAUGE 7 YEAR OF CONSTRUCTION 1981 CARD MODEL FOR WORKING HEIGHT 2200mm DIAMETERS 1700mm AND DOFFER 1270mm, CONSISTING OF FRONT TRAIN AND A CARD WITH RIGID SEAL AT THE FRONT AND ORDINARY ELASTIC AT THE 1ST CARD. THE LINE CONSISTS OF SILOS, LOADER, FRONT END, CARDER, CROSS LAPPER CORMATEX SAGITTARIO LINE, FIBER USED 70% COTTON AND 30% VISCOSE, PLANT IN GOOD GENERAL CONDITION. QUANTITY: 1 ITEM 004 MALIWATT 3600 TYPE 14013 GAUGE 14 YEAR OF CONSTRUCTION 1981 OCTIR MODEL CARD WORKING HEIGHT 2500mm, RIGID FRONT GASKET AND 1ST ELASTIC CARD, ORDINARY FINENESS, THE LINE IS COMPOSED OF SILOS, AVAN TRAIN LOADER AND ONE CARD, CROSS LAPPER CORMATEX SAGITTARIO LINE, FIBER USED MIXED POLYESTER AND VISCOSE 70/30% LENGTH FIBER 60mm, 3.4 DTEX, IMPLANT IN EXCELLENT CONDITION QUANTITY: 1 ITEM 005 MALIWATT 3600 TYPE 14013 GAUGE 14 YEAR OF CONSTRUCTION 1981 CARD FOR MODEL FOR WORKING HEIGHT 2200mm DIAMETERS 1700mm AND DOFFER 1270mm, CONSISTING OF FRONT TRAIN AND A CARD WITH RIGID SEAL AT THE FRONT AND ORDINARY ELASTIC ON THE 1ST CARD. THE LINE CONSISTS OF SILOS, LOADER, FRONT END, CARDER, CROSS LAPPER CORMATEX SAGITTARIO LINE, FIBER USED 70% COTTON AND 30% VISCOSE, PLANT IN GOOD GENERAL CONDITION. QUANTITY: 1 ITEM 006 MALIWATT 3600 TYPE 14011 GAUGE 14 YEAR OF CONSTRUCTION 1976 BOISSON MODEL CARD WORKING HEIGHT 2000mm, RIGID FRONT GASKET AND 1ST ELASTIC CARD, ORDINARY FINENESS, THE LINE IS COMPOSED OF SILOS, AVAN TRAIN LOADER AND ONE CARD, NENCINI CROSS LAPPER, FIBER USED MIXED POLYESTER AND VISCOSE 70/30% FIBER LENGTH 60mm, 3.4 DTEX, IMPLANT IN FAIR GENERAL CONDITION QUANTITY: 1 DESCRIPTION: ALL PRODUCTION LINES ARE FULLY FUNCTIONAL AND ARE STILL PRODUCTION ALL THE PLANTS ARE COMPOSED OF FORWARD TRAIN AND ONE CARD DOES NOT HAVE FIBER CROSSING AND THE PRODUCTION OF ARTICLES WITH MELANGE COLORS IS PROBLEMATIC, ANOTHER HANDICAP THAT I HAVE DETECTED THE PLANT DOES NOT HAVE FIBER PREPARATION AND STORAGE, THERE ARE BALES AND SILOS OPENERS WITH FEEDING CONVEYORS BUT THE FIBER USED IS NOT WELL MIXED, CURRENTLY THEY PRODUCE NON-WOVEN FABRICS FOR PRINTING. ALL MALIWATTS THE ELECTRICAL SYSTEM AND THE ELECTRONIC BAR HEATING SYSTEM HAVE BEEN REBUILT; THE CROSS LAPPERS HAVE ALSO BEEN UPDATED IN THE ELECTRONICS. THE SELLER SELLS THE PLANT IS NOT PROFITABLE AND THEY PLAN TO REINVEST IN DIFFERENT PRODUCTIONS IN ADDITION, THERE ARE ALSO VARIOUS ACCESSORIES FOR PRODUCTION SUCH AS BALE OPENERS, CALENDERS, CONVEYOR TROLLEYS ETC. Learn More

REFERENCE NUMBER: L-4869 

TRUTZSCHLER LINE, 100” WORKING WIDTH, YEAR 2005 – COMPLETE  

 

TRUTZSCHLER 

 

 

AUTOMATEX DOUBLE NEEDLE LOOM, GRADE “7”

 

TRUTZSCHLER OPENER/BLOWER, MODEL TF2500

TRUTZSCHLER FORMER, MODEL FD-U 1200

AUTOMATEX DOUBLE NEEDLE LOOM (3 YEAR OLD DC MOTOR AND NEW DC DRIVE)

HOT CALENDERS (INSTEAD OF OVEN)

COOLING ROLLERS

FR SPRAYER

SLITTER

GUILLOTINE

BUNTIUNG MAGNETIC METAL DETECTOR

PAD ROLLING UNIT

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-4181
TEMAFA-DILO-SPINNBAU-AUTEFA NEEDLING LINE WORKING WIDTH 5300mm YEAR 2000

NEEDLING LINE
YEAR: 2000
WORKING WIDTH: 5300mm

CONSISTING OF:
ITEM 001
TEMAFA BALE OPENER
QUANTITY: 1

ITEM 002
SPINNBAU SUPER SERVO CARD
WORKING WIDTH: 3000mm
QUANTITY: 1

ITEM 003
AUTEFA TOPLINER CL 4004 CROSS-LAPPER
INPUT: 3000mm
OUTPUT: 6500mm
QUANTITY: 1

ITEM 004
DI-LOOM OD-II 60 PRE-NEEDLE LOOM
WORKING WIDTH: 6000mm
QUANTITY: 1

ITEM 005
DILO DI-LOOM OUG-II 60 FINISHING NEEDLE LOOM
WORKING WIDTH: 6000mm
QUANTITY: 1

ITEM 006
DILO WSP 25/55 ACCUMULATOR
QUANTITY: 1

ITEM 007
DILO CUTTING AND WINDING UNIT
QUANTITY: 1

ITEM 008
TEMAFA EDGE TRIM OPENER
UP TO 960 KG/H
QUANTITY: 1

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: C-4010

NEEDLE PUNCHING PRODUCTION LINE, WORKING WIDTH 3000mm TO 6000mm, YEAR 2005

 

DETAILS:

 

OFFER 001

NEEDLE PUNCHING PRODUCTION LINE

YEAR: 2005

WORKING WIDTH: 6000mm

WEIGHT: 120 TO 800 G/M²

MATERIAL: PP, PES

CAPACITY: 600 KG/H

WITH FOLLOWING FIBERS:

6.7 DTEX

FIBER LENGTH: 60 TO 90mm

WORKING HOURS: CA. 41000 H

 

CONSISTS OF:

OFFER 002

BALE OPENER

MAKE: FALUBAZ

FEEDING TABLE: 1000mm WIDTH

2000mm LENGTH

WITH ELECTRONICALLY WEIGH BOXES

COLLECTING CONVEYOR

AND MIXING UNIT

QUANTITY: 4

 

OFFER 003

CHAMBER FIBER MIXING UNIT

QUANTITY: 6

 

OFFER 004

FINE OPENER

WITH METAL DETECTOR

QUANTITY: 1

 

OFFER 005

DUST COLLECTION UNIT

QUANTITY: 2

 

OFFER 006

FOR VOLUMETRIC HOPPER FEEDER

MAKE: FOR

TYPE: HF

QUANTITY: 1

 

OFFER 007

FOR CARDING MACHINE

MAKE: FOR

TYPE: WM 2+2

WORKING WIDTH: 3000mm

BREAST: 3X WORKERS / STRIPPERS

TAMBOUR: 4X WORKERS / STRIPPERS

DOUBLE DOOFER

CONDENSING SYSTEM

QUANTITY: 1

 

OFFER 008

AUTOMATEX CROSSLAPPER

MAKE: AUTOMATEX

TYPE: FA 5000/TC

WITH PROFILING

QUANTITY: 1

 

OFFER 009

ASSELIN WEB DRAFTER

MAKE: ASSELIN

TYPE: ETO-15

ROLLERS: 15

QUANTITY: 1

 

OFFER 010

AUTOMATEX PRE – NEEDLE LOOM

MAKE: AUTOMATEX

TYPE: PR160/T

NEEDING: DOUBLE BOARD DOWN

NEEDLES: 2X 8000 N/M

STROKE: 55mm

INCLUSIVE CBF FEEDING SYSTEM

QUANTITY: 1

 

OFFER 011

AUTOMATEX NEEDLE LOOM

MAKE: AUTOMATEX

TYPE: AG160/TB

NEEDING: 4 BOARD QUATTRO PUNCH

NEEDLES: 4X 8000 N/M

STROKE: 65mm

QUANTITY: 1

 

OFFER 012

BELMATEX ACCUMULATOR

MAKE: BELMATEX

QUANTITY: 1

 

OFFER 013

BELMATEX END OF LINE

MAKE: BELMATEX

SLITTER

WINDER

QUANTITY: 1

 

QUANTITY: 1 LINE

Learn More

C-3783 NEEDLING LINE, WORKING WIDTH 2200mm TO 7500mm, YEAR 2001 TO 2004

OFFER 001
NEEDLING LINE

CONSISTING OF:
OFFER 002
MASIAS DOUBLE DOFFER CARD

OFFER 003
TATHAM CROSS-LAPPER

OFFER 004
AUTOMATEX PR.50/T PRE-NEEDLE LOOM

OFFER 005
AUTOMATEX AG.80/B FINISHING NEEDLE LOOM

OFFER 006
AUTOMATEX CUTTING & WINDING UNIT

QUANTITY: 1 LINE

Learn More

C-3782 NEEDLING LINE, WORKING WIDTH 3000mm TO 8000mm, YEAR 2010

OFFER 001
NEEDLING LINE

OFFER 002
MTV CA 1500 BALE OPENERS

OFFER 003
BEMATIC BHL 2500 OPENER

OFFER 004
BEMATIC BSS BHL 3000 CARD

OFFER 005
TEXNOLOGY CROSS-LAPPER

OFFER 006
TECTEX NS 5000/50 PRE-NEEDLE LOOM

OFFER 007
TECTEX ANS 5000/120 S FINISHING NEEDLE LOOM

OFFER 008
SICAM CAL/NT/2 DOUBLE CYLINDER THERMOBONDING CALENDER

OFFER 009
TECHNOPLANTS CUTTING AND WINDING UNIT

QUANTITY: 1 LINE

Learn More

M-1519 NONWOVEN PRODUCTION LINE WIDTH 7000mm YEAR 2004

OFFER 001
MASIAS HOPPER FEEDER

OFFER 002
MASIAS CARDING MACHINE

OFFER 003
PRE-NEEDLE LOOM

OFFER 004
FINISH NEEDLE LOOM

OFFER 005
AUTOMATEX ACCUMULATOR

OFFER 007
AUTOMATEX LONGITUDINAL AND CROSS CUTTER

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: C-3784 NEEDLING LINE, WORKING WIDTH 2500mm TO 7400mm, YEAR 1994 TO 1997 DETAILS: OFFER 001 NEEDLING LINE YEAR: 1994 TO 1997 WORKING WIDTH: 6500mm CONSISTING OF: OFFER 002 HERGETH DOUBLE DOFFER CARD YEAR: 1997 WORKING WIDTH: 2500mm AVANTRAIN + 1 SWIFT UP TO 950 KG/H QUANTITY: 1 OFFER 003 ASSELIN 658 PROFILE CROSS-LAPPER YEAR: 1994 INPUT: 2500mm OUTPUT: 6800mm UP TO 120 M/MIN QUANTITY: 1 OFFER 004 FEHRER NL9 PRE-NEEDLE LOOM YEAR: 1994 WORKING WIDTH: 7400mm DOWNSTROKE STROKE: 60mm 2658 NEEDLES/M QUANTITY: 1 OFFER 005 FEHRER NL42 FINISHING NEEDLE LOOM YEAR: 1994 WORKING WIDTH: 7000mm UPSTROKE & DOWNSTROKE STROKE: 70mm 9702 NEEDLES/M QUANTITY: 1 OFFER 006 WINDING UNIT YEAR: 1994 WORKING WIDTH: 7000mm QUANTITY: 1 QUANTITY AVAILABLE: 1 LINE Learn More

REFERENCE NUMBER: A-1149 (1212225GHBP11RE) A NONWOVEN LINE FOR GEOTEXTIL PRODUCTION LINE, 6500mm, YEAR 2010 SPECIFICATION: FINAL FABRIC WIDTH: MAX. 6.500mm YEAR OF CONSTRUCTION: 2010 FIBERS: PP / PES BONDING: MECHANICAL (NEEDLING) WEIGHT RANGE: 80 – 1.500 G/M² CAPACITY: MAX. 1.000 KG/H 1) FIBER PREPARATION & BLENDING 2) CARDING GROUP 3) CROSS LAPPER 4) PRE - NEEDLE LOOM 5) FINISH – NEEDLE LOOM 6) CALENDAR 7) END-OF-LINE QUANTITY AVAILABLE: 1 Learn More