REFERENCE NUMBER: C-2505
AIR LAID LINE YEAR 2000 WIDTH 2400mm, CONTINUOUS OVEN FOR THERMOBONDING YEAR 2010 WIDTH 2600mm, LONGITUDINAL & TRANSVESAL CUTTER YEAR 2000 WIDTH 2500mm
SPECIFICATIONS:
NO. 1 AIR-LAY LINE BY "LAROCHE" – FRANCE
NO. 1 CONTINUOUS OVEN FOR THERMOBONDING OF NONWOVENS BY "SICAM" - ITALY
NO. 1 LONGITUDINAL AND TRANSVERSAL CUTTER BY "AUTOMATEX" - ITALY
QUANTITY AVAILABLE: 1 Learn More
REFERENCE NUMBER: X-1016
NONWOVEN LINE FOR PRODUCING POLYESTER BATTING WIDTH 3600 mm (NEW 2015)
1) –Opening and Blending line
2) - CROSSLAPER
3)- Thermobonding Oven
4) – Including main control panel.
3 YEAR EXTENDED WARRANTY
OUR COMPANY OFFERS INSTALLATION AND COMMISSIONING OF THIS LINE FOR OUR MACHINES 2 TECHNICAL IN THE PLACE TO BE APPOINTED BY THE CUSTOMER.
Learn More
REFERENCE NUMBER: M-4398 (101048QEU9RX) K
STRUCTURING NEEDLE LOOM PUNCH MACHINE YEAR 1974 WIDTH 4880mm
STRUCTURING NEEDLE LOOM PUNCH MACHINE
DR. ERNST FEHRER AG
TYPE NL 11
WORKING WIDTH 4880mm
YEAR 1974
LAMELLA GAUGE 4.7mm
THE CONTROLS AND ELECTRIC BOARDS ARE NOT INCLUDED BECAUSE THE MACHINE WAS CONTROLLED BY A CENTRAL CONTROL FOR THE ENTIRE LINE
TOTALLY 2 OR 3 SETS OF NEEDLE BOARDS CAN BE SUPPLIED WITH THE MACHINE
THE MACHINE WAS PURCHASED AS SECOND-HAND APPROXIMATELY 7 YEARS AGO AND WAS USED FOR MAKING CARPETS SINCE THEN
AS PER OPINION OF THE PLANT TECHNICIAN, THE MAIN BEARING IN THE HOUSING SHOULD BE OKAY.
THE MACHINE WAS PURCHASED FROM A MULTINATIONAL COMPANY 7 YEARS AGO AND WAS IN GREAT CONDITION WHEN THE USED MACHINE CHANGED OWNER
THE TOTAL INSIDE WIDTH IS 5178mm
THE WIDTH ON WHICH THE NEEDLE BOARDS ARE DRILLED WITH HOLES FOR THE NEEDLES IS 4920mm.
SO THIS IS THE TOTAL MAXIMUM WIDTH ON WHICH THE MATERIAL WOULD BE NEEDLE PUNCHED.
NEEDLE BOARDS INSIDE THE MACHINE: 4 BOARDS ON ONE LINE.
NUMBER OF NEEDLES PER METER: ESTIMATED TO BE 5,000 NEEDLES/M, BUT NEEDS TO BE CHECKED.
QUANTITY AVAILABLE: 1 Learn More
REFERENCE NUMBER: C-2480
NON-WOVEN LINE, WIDTH 1400mm, YEAR 1992 TO 2007
SPECIFICATIONS:
NONWOVEN LINE
YEAR OF CONSTRUCTION 1992 + 2007.
THE LINE IS SUITABLE TO OPEN BALES AND TO PRODUCE A WEB FOR
FILLING DISPOSABLE BED SHEETS.
THE LINE IS CONSISTING OF:
BALE OPENING MACHINE
YEAR OF CONSTRUCTION 1992.
WEB FORMING MACHINE BONINO.
YEAR OF CONSTRUCTION 2007.
WIDTH 1400 mm. CAPACITY 40 TO 50 METERS / MIN.
END SECTION OF CARDING MACHINE TRAVERSI + ARMENTI.
YEAR OF CONSTRUCTION 2007.
MACHINE WIDTH 1500 mm.
EXTRACTOR FAN.
QUANTITY AVAILABLE: 1 Learn More
REFERENCE NUMBER: F-1422
BALE BREAKER/FIBER MIXING SYSTEM 03E (NEW)
MACHINE IS USED TO MIX FIBERS (SILICONIZED, NON-SILICONIZED POLYESTER, LOW MELT POLYESTER, CONJUGATE, HOLLOW POLYESTER FIBER) IN DIFFERENT RATIO AND SEND TO THE CARDING MACHINE.
TECHNIQUE DATA:
CAPACITY: 400 TO 600KG/H
TOTAL POWER: 4.45KW
PRE-OPENING MACHINE POWER: 7KW
MACHINE WORKING WIDTH: 1200mm
PRE-OPENER WORKING WIDTH: 1000mm
WEIGHING CAPACITY: 1500GM
WEIGHING TOLERANCE: 6%
VOLUME OF WEIGHING HOPPER: 0.3M³
WEIGHING SPEED: 3 TO 5 TIMES/MIN
OVERALL MACHINE DIMENSIONS: 6300mm × 3360mm × 1300mm
QUANTITY AVAILABLE: 1 Learn More
REFERENCE NUMBER: M-3471 (880OKRSHH7) L
NEEDLE PUNCHED NONWOVEN PRODUCTION LINE 4500mm
TECHNICAL DATA:
RAW MATERIALS: NYLON, POLYESTER, POLYPROPYLENE, GLASS FIBER, ETC.
FINENESS OF FIBER: 2.5 TO 10DENIER
LENGTH OF FIBER: 38 TO 76mm
MIXING RATIO BETWEEN TWO FIBERS: 20 TO 100%
SPEED: 6m/min (PER 2.5-6D× 38-51mm)
MAX. 5000 KG/DAY (PER 22 HOURS/DAY)
RANGE OF GRAM WEIGHT: 100 TO 250g/m2
CARDING MACHINE FEATURES ARE ACCORDING GRAM WEIGHT: 250G/M², 300G/M²
PROCESS FLOW CHART:
BALE OPENER---PER-OPENER—FINE OPENER--FEEDER---CARDING MACHINE-- CROSSLAPPER--TRANSIT APRON---HIGH-SPEED PRE-NEEDLE LOOM---(2) HIGH-SPEED MAIN NEEDLE LOOM--CALENDER---CUTTER AND REWINDER
QUANTITY AVAILABLE: 1 Learn More
V-1045 THIBEAU CARDING MACHINE WORKING WIDTH: 2,500mmREFERENCE NUMBER: V-1045 THIBEAU CARDING MACHINE WORKING WIDTH: 2,500mm SPECIFICATIONS: MAKE: THIBEAU TYPE: CA5 Y.O.C.: 1984 – 1985 WORKING WIDTH: 2,500mm QUANTITY AVAILABLE: 1 Learn More
M-4398 STRUCTURING NEEDLE LOOM PUNCH MACHINE YEAR 1974 WIDTH 4880mmREFERENCE NUMBER: M-4398 (101048QEU9RX) K STRUCTURING NEEDLE LOOM PUNCH MACHINE YEAR 1974 WIDTH 4880mm STRUCTURING NEEDLE LOOM PUNCH MACHINE DR. ERNST FEHRER AG TYPE NL 11 WORKING WIDTH 4880mm YEAR 1974 LAMELLA GAUGE 4.7mm THE CONTROLS AND ELECTRIC BOARDS ARE NOT INCLUDED BECAUSE THE MACHINE WAS CONTROLLED BY A CENTRAL CONTROL FOR THE ENTIRE LINE TOTALLY 2 OR 3 SETS OF NEEDLE BOARDS CAN BE SUPPLIED WITH THE MACHINE THE MACHINE WAS PURCHASED AS SECOND-HAND APPROXIMATELY 7 YEARS AGO AND WAS USED FOR MAKING CARPETS SINCE THEN AS PER OPINION OF THE PLANT TECHNICIAN, THE MAIN BEARING IN THE HOUSING SHOULD BE OKAY. THE MACHINE WAS PURCHASED FROM A MULTINATIONAL COMPANY 7 YEARS AGO AND WAS IN GREAT CONDITION WHEN THE USED MACHINE CHANGED OWNER THE TOTAL INSIDE WIDTH IS 5178mm THE WIDTH ON WHICH THE NEEDLE BOARDS ARE DRILLED WITH HOLES FOR THE NEEDLES IS 4920mm. SO THIS IS THE TOTAL MAXIMUM WIDTH ON WHICH THE MATERIAL WOULD BE NEEDLE PUNCHED. NEEDLE BOARDS INSIDE THE MACHINE: 4 BOARDS ON ONE LINE. NUMBER OF NEEDLES PER METER: ESTIMATED TO BE 5,000 NEEDLES/M, BUT NEEDS TO BE CHECKED. QUANTITY AVAILABLE: 1 Learn More
F-1422 BALE BREAKER/FIBER MIXING SYSTEM 03E (NEW)REFERENCE NUMBER: F-1422 BALE BREAKER/FIBER MIXING SYSTEM 03E (NEW) MACHINE IS USED TO MIX FIBERS (SILICONIZED, NON-SILICONIZED POLYESTER, LOW MELT POLYESTER, CONJUGATE, HOLLOW POLYESTER FIBER) IN DIFFERENT RATIO AND SEND TO THE CARDING MACHINE. TECHNIQUE DATA: CAPACITY: 400 TO 600KG/H TOTAL POWER: 4.45KW PRE-OPENING MACHINE POWER: 7KW MACHINE WORKING WIDTH: 1200mm PRE-OPENER WORKING WIDTH: 1000mm WEIGHING CAPACITY: 1500GM WEIGHING TOLERANCE: 6% VOLUME OF WEIGHING HOPPER: 0.3M³ WEIGHING SPEED: 3 TO 5 TIMES/MIN OVERALL MACHINE DIMENSIONS: 6300mm × 3360mm × 1300mm QUANTITY AVAILABLE: 1 Learn More