Search results for: 'and'

REFERENCE NUMBER: T-6847 SPINNBAU DOUBLE DOFFER NONWOVEN CARD BRAND: SPINNBAU SHORT DESCRIPTION: DOUBLE DOFFER NONWOVEN CARD NEW HIGH CAPACITY HOPPER FEEDER WITH CHUTE DELIVERY ELECTRONIC WEIGH SYSTEM “TS MICROFEED” NEW AC INVERTER DRIVE SYSTEM WITH TOUCH SCREEN CONTROL NEW AC GEARED MOTOR UNITS NEW DRIVE BELTS AS REQUIRED NEW SAFETY CIRCUIT, E-STOPS AND GUARD INTERLOCKS INCLUDING MACHINE REFURBISHMENT AND RE-PAINT TO RAL 7035 (LIGHT GREY) THE 2500mm SPINNBAU CARD CAN BE SPECIFIED FOR YOUR PRODUCTION REQUIREMENTS TOGETHER WITH A NEW CROSSLAPPER, OVENS AND NEEDLE LOOMS. RE-CONDITIONED QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6846 EDELMANN, SPINNBAU, TRUTZSCHLER NONWOVEN THERMOBONDING LINE, WORKING WIDTH 2500mm, YEAR 1993 BRAND: EDELMANN, SPINNBAU, TRUTZSCHLER SHORT DESCRIPTION: NONWOVEN THERMOBONDING LINE YEAR: 1993 NONWOVEN THERMOBONDING LINE WORKING WIDTH 2500mm BRAND: TRUTZSCHLER, SPINNBAU, RAMISCH KLEINEWEFERS, EDELMANN CONSISTING OF: 1X TRUTZSCHLER OPENING AND BLENDING LINE, YEAR 1993 1X TRUTZSCHLER FBK FEEDER, WORKING WIDTH 2500mm, YEAR 1993 1X SPINNBAU DOUBLE DOFFER CARD WITH ONE PAIR OF CONDENSING ROLLERS AT THE TOP AND THE BOTTOM, WORKING WIDTH 2500mm, YEAR 1993 1X RAMISCH KLEINEWEFERS HYDRAIN CALANDER, YEAR 1993 1X EDELMANN SLITTING AND WINDING STATION, YEAR 1993 QUANTITY: 1 Learn More

KNEE LEVER SCISSORS
MAKE MOHR / FLEISSNER
CUTTING WIDTH: 2400mm
YEAR 1997 - EXCHANGE THE WHOLE CUTTING BARK AND BACKING KNIFES
YEAR 1998 - HYDRAULIC UNIT COMPLETELY NEW
YEAR 1998 - KNIFE BAR SYSTEM AND LOWER KNIFE COMPLETELY NEW
KNIFE BAR HAS TWO-SIDED HOLD DOWN WITH KNIFE GUIDE, KNIFE AND LOWER KNIFE AS NEW
HYDRAULIC CYLINDER SEAL KIT - NEW
HYDRAULIC OIL - NEW
MACHINE IS IN GOOD CONDITION
BLADE IS IN GOOD CONDITION
WE ARE CUTTING WOOL FLEECE UP TO 4000 GR/M² WITHOUT ANY PROBLEMS
POWER: 400 V, 50 HZ, 8.0 KW
SPACE REQUIREMENTS: L: 4250mm X B 1900mm X H 2600mm
THIS MACHINE IS AVAILABLE IMMEDIATELY

Learn More

MAKE: LAROCHE
MODEL: SUPER OLYMPIC
WIDTH: 1500mm
YEAR: MID 1980’S
6 CYLINDERS EACH LINE
CYLINDER DIAMETER: 1000mm
ALL CYLINDERS ARE DESIGNED FOR PINNED LAGS AND THERE IS LIFE LEFT IN MOST OF THE LAGS SETS.
LAGS: (1) 8mm x 135, (1) 10mm x 160, (1) 12 x 166, (3) 13mm x 174
EACH CYLINDER FED BY A FEED ROLL TO FEED DISH COMBINATION AND THE FIBER IS TRANSFERRED TO THE FOLLOWING CYLINDER VIA A CONDENSING SECTION.
MOTORS: 3 x 150 HP 575 VOLT
TOTAL REQUIRED POWER: 875 AMPS
NEW CONTROLS WITH ABB DRIVES
FEED CHUTES
LUMMUS BALERS
PINNED CYLINDERS
TEMAFA BLENDING BINS
EXIT CONVEYORS
EACH SECTION EQUIPPED WITH ANSUL DRY POWDER FIRE PROTECTION SYSTEM THAT IS ACTIVATED FROM EMBER DETECTED IN THE DUCT REMOVAL PIPING.
LINES INCLUDE ALL NECESSARY FANS, MAGNETS, DUCTING AND WIRING

IN PERFECT WORKING ORDER

QUANTITY: 2 LINES

Learn More

REFERENCE NUMBER: L-4307
WITH INCLINED APRON, DOUBLE-ROLL CLAMP, RECIPROCATING LAPPING, BOTTOM-APRON OUTLET
VERTICAL THICKNESS CONTROLLED BY RECIPROCATING LAPPING: 30mm TO 150mm
INPUT APRON WIDTH: 2700mm
INPUT APRON SPEED:≤40m/min (ADJUSTABLE)
OUTPUT APRON WIDTH: 2700mm
OUTPUT APRON SPEED:1 TO 12m/min (ADJUSTABLE)

Learn More

REFERENCE NUMBER: L-4867

DELL’ORCO RAG PICKING (TEARING)  LINES 1500mm (59”) WIDTH, ( 3 lines) WITH PIERRET GUILLOTINES

 

6 X CYLINDER LINE WITH HOPPERS, CYCLONES, & WILLOWS

3 X CYLINDER LINE WITH A HOPPER AND A WILLOW

5 X CYLINDER LINE (NOT CONNECTED TO POWER), WITH HOPPERS, CYCLONES, AND WILLOWS

 

TIMTEX ROTARY FILTER (2009)

2 PIERRET LOADERS

4 PIERRET CUTTERS

SPARE PARTS, INCLUDING BEARINGS, BELTS, MOTORS, AND MACHINE PARTS

Learn More

REFERENCE NUMBER: J-1282
WEST POINT SIZING MACHINE WITH DOUBLE SIZE BOX
YEAR: 1998
QUANTITY: 1

Learn More

H-1305 BATT FEEDING SYSTEM - WORKING WIDTH 3000mm

WORKING WIDTH: 3000mm
CONTROL SYSTEM INCLUDED

COMPOSITION OF THE MACHINE:
- LOWER PVC INCLINED CONVEYOR BELT FOR THE TRANSPORT OF THE WEB FROM THE CROSS LAPPER TO THE ENTRANCE OF THE NEEDLE LOOM.
- UPPER PVC COMPRESSION BELT FOR THE PRE-COMPRESSION OF THE WEB BEFORE ENTERING THE FEEDING ROLLS.
- LOWER PVC CONVEYOR AND UPPER PVC BELT DRIVEN BY ONE GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- PAIR OF FEEDING ROLLS WITH PLASTIC FINGERS TO GUIDE THE COMPRESSED WEB CLOSE TO FIRST NEEDLE ZONE OF THE PRE-NEEDLE LOOM. ROLLER PAIR DRIVEN BY GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- BATT FEEDING SYSTEM INSTALLED ON RAIL SYSTEM AND EASY REMOVABLE FOR MAINTENANCE OF THE NEEDLE LOOM

TECHNICAL DATA:
ELECTRICAL INFORMATION:
ELECTRIC: MAIN VOLTAGE 400 V, 50 HZ, 3 PH.
CONTROL VOLTAGE: DC - 24 V / AC - 230 V
OTHER INFORMATION:
AIR PRESSURE (CONSTANT): MIN. 6 BAR (AT SITE)
OPERATOR SIDE LEFT OR RIGHT (IN WEB RUNNING DIRECTION)
LACQUER COATING:
MAIN COLOR OF THE MACHINES: RAL 7035 (LIGHT GREY)
CONTROL CABINET AND CONTROL DESK RAL 7035 (LIGHT GREY)
LABELING: ENGLISH
TECHNICAL DOCUMENTATION: ONE TIME ON CD-ROM (FURTHER SETS AVAILABLE AT ADDITIONAL COST)
LANGUAGE FOR OPERATING INSTRUCTIONS: ENGLISH
LANGUAGE FOR FURTHER DOCUMENTATION (SPARE PART LISTS, WIRING DIAGRAM, ETC): ENGLISH

ENVIRONMENTAL CONDITIONS:
INSTALLATION HEIGHT ABOVE SEA LEVEL: LESS THAN OR EQUAL TO 1,000 METERS
TEMPERATURE: 24° C (±2° C)
RELATIVE HUMIDITY: 65% (±5%)
ABSOLUTE WATER CONTENT: 9 TO 12 G/KG DRY AIR
NOTE: PLEASE MAKE SURE THAT THE TEMPERATURE INSIDE THE CONTROL CABINET DOES NOT EXCEED 450 CENTIGRADE. IN CASE OF EXCESSIVE ROOM TEMPERATURES WE RECOMMEND AN AIR-CONDITIONING SYSTEM FOR THE CONTROL CABINETS TO AVOID MALFUNCTION OF ELECTRICAL COMPONENTS

QUANTITY: 1

Learn More

H-1134 FIBERFILL LOW MELT THERMOBONDING LINE, WORKING WIDTH 2800mm

DETAILS:
CAN DO LIGHT WEIGHT AND CONDENSED WEIGHTS FOR MATTRESSES
WORKING WIDTH: APPROX. 110”/2800mm

THE LINE CONSISTS OF THE FOLLOWING:
OFFER 001
AZTEC 2 BURNER GAS COMPRESSION OVEN
MEASURING 130” W X 25' L
WITH TOP AND BOTTOM COMPRESSION BELTS
QUANTITY: 1

OFFER 002
COOLING CHAMBER

OFFER 003
HUNTER 60” SINGLE SECTION GARNETS

OFFER 004
CAMELBACK LAPPERS

OFFER 005
CROSS LAPPER

OFFER 006
FLOOR APRON

OFFER 007
BLEND LINE
WITH (6) 60” HOPPERS
WITH ALUMINUM WEIGH PANS, BLENDER AND CONVEYOR

OFFER 008
60” CLAW TOOTH PICKER

OFFER 009
130” HIGH SPEED SLITTER
WITH 11 CIRCULAR KNIVES

OFFER 010
130” WIND UP
ALL CONTROLS, MOTORS, DRIVES, PLATFORMS, ETC.

QUANTITY: 1 LINE

Learn More

P-2927 ROLANDO RC SILVER OPENER WIDTH 500mm YEAR 1998

ROLANDO
TYPE: RC
SILVER OPENER
YEAR: 1998
WORKING WIDTH: 500mm

QUANTITY: 1

Learn More