Search results for: 'cross+l'

THERMOBONDING LINE
YEAR: 1990S
WORKING WIDTH: 3100mm
CONSISTING OF:
1 FOR DOUBLE DOFFER CARD, WORKING WIDTH: 2500mm, AVANTRAIN + 2 SWIFTS
1 FOR CROSS-LAPPER, INPUT: 2500mm, OUTPUT: 3800mm
1 TOMES THERMOBONDING OVEN, WORKING WIDTH: 3100mm, SINGLE BELT, 3 ZONES, COOLING SECTION
1 TOMES CUTTING AND WINDING UNIT
1 MAGETRON WADDING COMPACTOR
UP TO 500 KG/H

QUANTITY: 1 

R-7391 BEMATIC BOMBI NONWOVEN CARDLINE AND OVEN, 2500mm,  YEAR 2005

BRAND BEMATIC
MODEL BOMBI
YEAR 2005
STATUS AVAILABLE
BEMATIC - BOMBI NONWOVEN
2 BALE HOLES, 1 OPENING ROLL, 1 OPENER
1 CARD HERGETH 2500mm, 1.5 PHASES
1 CROSS TAPPER 2500mm
1 BOMBI OVEN, 3 LAYERS, 10 M LONG, 2600mm WIDTH
3 WEISHAUPT BURNERS
1CUTTING MACHINE, 4 HORIZONTAL KNIVES
1 ROLLING MACHINE
1 SCALE
1 PACKING MACHINE THE LINE IS IN EXCELLENT TECHNICAL CONDITION

REFERENCE NUMBER: L-1760
FOR PUNCHING HOLES IN PU FOAM
WORKING WIDTH: 2100mm
QUANTITY: 1

H-1305 BATT FEEDING SYSTEM - WORKING WIDTH 3000mm

WORKING WIDTH: 3000mm
CONTROL SYSTEM INCLUDED

COMPOSITION OF THE MACHINE:
- LOWER PVC INCLINED CONVEYOR BELT FOR THE TRANSPORT OF THE WEB FROM THE CROSS LAPPER TO THE ENTRANCE OF THE NEEDLE LOOM.
- UPPER PVC COMPRESSION BELT FOR THE PRE-COMPRESSION OF THE WEB BEFORE ENTERING THE FEEDING ROLLS.
- LOWER PVC CONVEYOR AND UPPER PVC BELT DRIVEN BY ONE GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- PAIR OF FEEDING ROLLS WITH PLASTIC FINGERS TO GUIDE THE COMPRESSED WEB CLOSE TO FIRST NEEDLE ZONE OF THE PRE-NEEDLE LOOM. ROLLER PAIR DRIVEN BY GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- BATT FEEDING SYSTEM INSTALLED ON RAIL SYSTEM AND EASY REMOVABLE FOR MAINTENANCE OF THE NEEDLE LOOM

TECHNICAL DATA:
ELECTRICAL INFORMATION:
ELECTRIC: MAIN VOLTAGE 400 V, 50 HZ, 3 PH.
CONTROL VOLTAGE: DC - 24 V / AC - 230 V
OTHER INFORMATION:
AIR PRESSURE (CONSTANT): MIN. 6 BAR (AT SITE)
OPERATOR SIDE LEFT OR RIGHT (IN WEB RUNNING DIRECTION)
LACQUER COATING:
MAIN COLOR OF THE MACHINES: RAL 7035 (LIGHT GREY)
CONTROL CABINET AND CONTROL DESK RAL 7035 (LIGHT GREY)
LABELING: ENGLISH
TECHNICAL DOCUMENTATION: ONE TIME ON CD-ROM (FURTHER SETS AVAILABLE AT ADDITIONAL COST)
LANGUAGE FOR OPERATING INSTRUCTIONS: ENGLISH
LANGUAGE FOR FURTHER DOCUMENTATION (SPARE PART LISTS, WIRING DIAGRAM, ETC): ENGLISH

ENVIRONMENTAL CONDITIONS:
INSTALLATION HEIGHT ABOVE SEA LEVEL: LESS THAN OR EQUAL TO 1,000 METERS
TEMPERATURE: 24° C (±2° C)
RELATIVE HUMIDITY: 65% (±5%)
ABSOLUTE WATER CONTENT: 9 TO 12 G/KG DRY AIR
NOTE: PLEASE MAKE SURE THAT THE TEMPERATURE INSIDE THE CONTROL CABINET DOES NOT EXCEED 450 CENTIGRADE. IN CASE OF EXCESSIVE ROOM TEMPERATURES WE RECOMMEND AN AIR-CONDITIONING SYSTEM FOR THE CONTROL CABINETS TO AVOID MALFUNCTION OF ELECTRICAL COMPONENTS

QUANTITY: 1

REFERENCE NUMBER: M-3561

LINE FOR THERMO BONDED WADDING YEAR 1987 - FOR MATTRESS AND BUILDING SECTOR, ETC

LINE FOR THERMO BONDED WADDING  -YOC  1987  - FOR MATTRESS AND  BUILDING SECTOR, ETC.

( ESPECIALLY IN POLYESTER + NATURAL FIBERS MIXED).

THE LINE HAS A PRODUCTION OF 350/400 KGS PER HOUR WITH A WORKING WIDTH FROM 150 CMS INTIL 240.

COMPOSITION :

. BONINO LOADER   WORKING WIDTH  mm. 2800

. BONINO CARDING MACHINE WORKING WIDTH  mm. 2800 SINGLE DOFFER

. TECHNOPLANTS CROSS LAPPER WORKING WIDTH   ENTRY/EXIT mm. 3000

. SICAM OVEN  - 2 FIELDS. WORKING WIDTH  2400 mm. + COOLING SECTION

. TECNICA TESSSILE CUTTING MACHINE WITH HORIZONTAL AND VERTICAL CUT WORKING WIDTH  mm. 3000

. MECAP  PACKAGING MACHINE FOR ROLLS

QUANTITY: 1

REFERENCE NUMBER: C-4181
TEMAFA-DILO-SPINNBAU-AUTEFA NEEDLING LINE WORKING WIDTH 5300mm YEAR 2000

NEEDLING LINE
YEAR: 2000
WORKING WIDTH: 5300mm

CONSISTING OF:
ITEM 001
TEMAFA BALE OPENER
QUANTITY: 1

ITEM 002
SPINNBAU SUPER SERVO CARD
WORKING WIDTH: 3000mm
QUANTITY: 1

ITEM 003
AUTEFA TOPLINER CL 4004 CROSS-LAPPER
INPUT: 3000mm
OUTPUT: 6500mm
QUANTITY: 1

ITEM 004
DI-LOOM OD-II 60 PRE-NEEDLE LOOM
WORKING WIDTH: 6000mm
QUANTITY: 1

ITEM 005
DILO DI-LOOM OUG-II 60 FINISHING NEEDLE LOOM
WORKING WIDTH: 6000mm
QUANTITY: 1

ITEM 006
DILO WSP 25/55 ACCUMULATOR
QUANTITY: 1

ITEM 007
DILO CUTTING AND WINDING UNIT
QUANTITY: 1

ITEM 008
TEMAFA EDGE TRIM OPENER
UP TO 960 KG/H
QUANTITY: 1

QUANTITY: 1 LINE

P-3201 CARDING AND NEEDLING LINE, WIDTH 6000mm, YEAR 2005

OFFER 001
CARDING AND NEELDING LINE
YEAR: 2005 (STARTED AT 2006)
WIDTH: 6000mm

CONSISTS OF:
OFFER 002
FALUBAZ FEEDING AND MIXING LINE

OFFER 003
FOR CARDING MACHINE WMZ+Z

OFFER 004
AUTOMATEX CROSS LAPPER FA 5000/TC AUTOMATE

OFFER 005
ASSELIN GILL BOX

OFFER 006
AUTOMATEX NEEDLING MACHINE PR 160/T

OFFER 007
AUTOMATEX NEEDLING MACHINE AG 160/TB

OFFER 008
BELMATEX COMPENSATOR WITH WINDER

QUANTITY: 1 LINE

C-3783 NEEDLING LINE, WORKING WIDTH 2200mm TO 7500mm, YEAR 2001 TO 2004

OFFER 001
NEEDLING LINE

CONSISTING OF:
OFFER 002
MASIAS DOUBLE DOFFER CARD

OFFER 003
TATHAM CROSS-LAPPER

OFFER 004
AUTOMATEX PR.50/T PRE-NEEDLE LOOM

OFFER 005
AUTOMATEX AG.80/B FINISHING NEEDLE LOOM

OFFER 006
AUTOMATEX CUTTING & WINDING UNIT

QUANTITY: 1 LINE

C-3782 NEEDLING LINE, WORKING WIDTH 3000mm TO 8000mm, YEAR 2010

OFFER 001
NEEDLING LINE

OFFER 002
MTV CA 1500 BALE OPENERS

OFFER 003
BEMATIC BHL 2500 OPENER

OFFER 004
BEMATIC BSS BHL 3000 CARD

OFFER 005
TEXNOLOGY CROSS-LAPPER

OFFER 006
TECTEX NS 5000/50 PRE-NEEDLE LOOM

OFFER 007
TECTEX ANS 5000/120 S FINISHING NEEDLE LOOM

OFFER 008
SICAM CAL/NT/2 DOUBLE CYLINDER THERMOBONDING CALENDER

OFFER 009
TECHNOPLANTS CUTTING AND WINDING UNIT

QUANTITY: 1 LINE

C-3789 STITCH-BONDING LINE, WORKING WIDTH 2500mm TO 4500mm, YEAR 1980

OFFER 001
STITCH-BONDING LINE

CONSISTING OF:
OFFER 002
BONINO CARD

OFFER 003
TECNICA TESSILE CROSS-LAPPER

OFFER 004
MALIMO MALIWAT 14013 STITCH-BONDING MACHINE

QUANTITY: 1 LINE