REFERENCE NUMBER: M-4398 (101048QEU9RX) K
STRUCTURING NEEDLE LOOM PUNCH MACHINE YEAR 1974 WIDTH 4880mm
STRUCTURING NEEDLE LOOM PUNCH MACHINE
DR. ERNST FEHRER AG
TYPE NL 11
WORKING WIDTH 4880mm
YEAR 1974
LAMELLA GAUGE 4.7mm
THE CONTROLS AND ELECTRIC BOARDS ARE NOT INCLUDED BECAUSE THE MACHINE WAS CONTROLLED BY A CENTRAL CONTROL FOR THE ENTIRE LINE
TOTALLY 2 OR 3 SETS OF NEEDLE BOARDS CAN BE SUPPLIED WITH THE MACHINE
THE MACHINE WAS PURCHASED AS SECOND-HAND APPROXIMATELY 7 YEARS AGO AND WAS USED FOR MAKING CARPETS SINCE THEN
AS PER OPINION OF THE PLANT TECHNICIAN, THE MAIN BEARING IN THE HOUSING SHOULD BE OKAY.
THE MACHINE WAS PURCHASED FROM A MULTINATIONAL COMPANY 7 YEARS AGO AND WAS IN GREAT CONDITION WHEN THE USED MACHINE CHANGED OWNER
THE TOTAL INSIDE WIDTH IS 5178mm
THE WIDTH ON WHICH THE NEEDLE BOARDS ARE DRILLED WITH HOLES FOR THE NEEDLES IS 4920mm.
SO THIS IS THE TOTAL MAXIMUM WIDTH ON WHICH THE MATERIAL WOULD BE NEEDLE PUNCHED.
NEEDLE BOARDS INSIDE THE MACHINE: 4 BOARDS ON ONE LINE.
NUMBER OF NEEDLES PER METER: ESTIMATED TO BE 5,000 NEEDLES/M, BUT NEEDS TO BE CHECKED.
QUANTITY AVAILABLE: 1 Learn More
REFERENCE NUMBER: C-2459
FEHRER AIRLAY NONWOVEN LINE, WIDTH 2200mm, YEAR 1992
SPECIFICATIONS:
1 PC. AIRLAY NONWOVEN LINE FEHRER V 21 K 12
2200 MM WORKING WIDTH,
YEAR OF CONSTRUCTION 1992,
SECOND-HAND
THE LINE IS CONSISTING OF:
1 PC. CHUTE FEEDER TEMAFA WITH CONDENSER.
1 PC. WEIGHTING UNIT KUKLA WITH CONTINUOUS BELT.
1 PC. FEEDING UNIT, CONTINUOUS BELT TYPE FEHRER - FEEDING V 21.
1 PC. WEB FORMING UNIT FEHRER V 21. 2200 mm WORKING WIDTH.
1 PC. AERODYNAMIC CARD FEHRER K 12, 2200 mm WORKING WIDTH.
1 PC. NEEDLE LOOM FEHRER NL 9 S, 2200 mm WORKING WIDTH. SINGLE BOARD DOWN STROKE MACHINE, 3000 NEEDLES/M.
MAX. 1500 STROKES/MIN. WITH OUTLET ROLLERS.
1 PC. WINDER WITH LONGITUDINAL CUTTER. (NO CROSS CUTTER AVAILABLE.)
1 PC. COMPLETE DUST COLLECTION UNIT.
THE V 21 K 12 LINE IS SUITABLE FOR A WEIGHT RANGE OF APPROX. 400 TO
2000 GR/SWM AND A CAPACITY OF UP TO 600 KG/H, DEPENDING ON FIBERS.
THE CONTROL PANELS, FILTERS ETC. ARE IN A GOOD CONDITION.
1 PC. RANDOM CARDING MACHINE FEHRER K 12 (REF. NO. 2133817).
2300 mm WORKING WIDTH, YEAR OF CONSTRUCTION UNFORTUNATELY NOT KNOWN.
WITH OPENING MACHINE K 12.
WITH ONE ASSELIN NEEDLE LOOM MODEL 169, STROKE HEIGHT 0-30 MM.
2.800 mm WORKING WIDTH.
WITH ONE FEHRER NEEDLE LOOM NL 12, 1200 STROKES/MIN.
60 mm STROKE HEIGHT, 2.400 mm WORKING WIDTH.
INCL. CUTTING AND ROLLING SECTION.
THE LINE CONSISTS OF K 12 SECTION ONLY. V 21 SECTION IS NOT INCLUDED.
PREVIOUSLY USED FOR 200 TO 2000 GR/SQM. THE MINIMUM IS 200 GR/SQM.
MAINLY USED TO PRODUCE HIGH QUALITY MATTRESS MATERIAL IN A SQM-RANGE OF
300-1200 G/SQM MADE FROM JUTE FIBRES.
IN GENERAL ALMOST ALL TYPES OF FIBERS CAN BE PROCESSED.
IT IS A GOOD MACHINE FOR NATURAL FIBERS.
1 PC. AIRLAY LINE ROLANDO / FEHRER V21/K12 (REF. NO. 2226950).
4400 MM WORKING WIDTH. THE LINE IS CONSISTING OF:
- HOPPER FEEDER ROLANDO, CASTING IRON.
- CHEMINEE FEEDER WITH AUTOMATIC REGULATED FEEDING ROLANDO.
- SQUARE METER MEASURING UNIT AND CONTROL SYSTEM MADE
BY FEHRER TYPE E-PW.
- OPENER FEHRER V 21, 4400 MM WORKING WIDTH.
- RANDOM CARDING MACHINE FEHRER K 12, 4400 MM WORKING WIDTH.
THE LINE HAS WORKED ON 1000 GR / SQM AND UP.
QUANTITY AVAILABLE: 1 Learn More
REFERENCE NUMBER: C-2481
NONWOVEN LINE FOR WOOLEN INSULATION MATERIAL, WIDTH 2500mm, YEAR 2007 TO 2012
SPECIFICATIONS:
NONWOVEN LINE FOR WOOLEN INSULATION MATERIAL
YEAR OF CONSTRUCTION: VARIOUS, PLEASE SEE BELOW.
THE LINE IS CONSISTING OF:
BALE OPENER WITH CARDING WILLOW.
METAL SEPARATOR MADE IN APPROX. 2007.
PASS THROUGH CLEANER MADE IN APPROX. 2007.
HOPPER FEEDER WITH FINE OPENER, RECONDITIONED EQUIPMENT.
2 LARGE BLENDING BINS WITH BIN EMPTIER, RECONDITIONED IN 2009.
COMPLETE SUCTION AND AIR FILTRATION UNIT WITH DRUM FILTER AND COARSE FIBER
PRE FILTER WITH FIBRE COMPACTOR AS WELL AS FINE DUST SEPARATOR.
HOPPER FEEDER WITH RESERVE CHUTE.
AIRLAY LINE MADE IN 2011. 2500 mm WORKING WIDTH.
DOUBLE BAND OVEN MADE IN 2010, VERY EFFICIENT.
LONGITUDINAL CUTTING DEVICE WITH 6 DRIVEN UPPER AND LOWER KNIVES.
CROSS CUTTER WITH STRONG POWER, MADE IN 2012.
VARIOUS VENTILATORS, CONDENSER, PIPES, PIPE SWITCHES,
EVENTUALLY ALSO INCLUDING ELECTRO FORK LIFT WITH BALE CLAMP.
THE LINE IS SUITABLE TO PROCESS WOOL AS WELL AS OTHER SHORT AND SHORTEST
FIBERS, ALSO RECYCLED COTTON. CAPACITY OF THE LINE: APPROX. 350 TO 400 KG/H.
QUANTITY AVAILABLE: 1 Learn More
REFERENCE NUMBER: C-2478
AIRLAY LINE WITH THERMOBONDING OVEN CORMATEX / SICAM, WIDTH 1300mm, YEAR 2010 TO 2011
SPECIFICATIONS:
AIRLAY LINE WITH THERMOBONDING OVEN CORMATEX / SICAM
WORKING WIDTH 1300mm
YEAR OF CONSTRUCTION 2010 to 2011.
THE AIRLAY LINE IS CONSISTING OF THE FOLLOWING COMPONENTS:
BALE OPENER WITH SCALE TO MEASURE THE WEIGHT.
CONVEYOR BELT.
OPENER.
AIRLAY UNIT.
CONVEYOR BELT.
THERMOBONDING OVEN.
EDGE TRIM UNIT.
PANEL CUTTER, FULLY AUTOMATIC.
LOADING DEVICE TO LOAD READY MADE PANELS ONTO A PALETTE.
THE THERMOBONDING OVEN IS MADE BY SICAM AND IS GAS HEATED.
QUANTITY AVAILABLE: 1 Learn More
INDEX
1. Technical specification pag.2
2.
Line composition
pag.3
3.
Machines description
pag.4
4.
Total price of the turn-key plant
pag.25
5.
Sale terms
pag.26
6.
Payment terms
pag.28
7.
General selling terms and conditions
pag.29
Learn More
M-2057 NEEDLE PUNCHED NONWOVEN PRODUCTION LINE 3300mmREFERENCE NUMBER: M-2057 (77011229TGUX) NEEDLE PUNCHED NONWOVEN PRODUCTION LINE 3300mm Learn More
M-4398 STRUCTURING NEEDLE LOOM PUNCH MACHINE YEAR 1974 WIDTH 4880mmREFERENCE NUMBER: M-4398 (101048QEU9RX) K STRUCTURING NEEDLE LOOM PUNCH MACHINE YEAR 1974 WIDTH 4880mm STRUCTURING NEEDLE LOOM PUNCH MACHINE DR. ERNST FEHRER AG TYPE NL 11 WORKING WIDTH 4880mm YEAR 1974 LAMELLA GAUGE 4.7mm THE CONTROLS AND ELECTRIC BOARDS ARE NOT INCLUDED BECAUSE THE MACHINE WAS CONTROLLED BY A CENTRAL CONTROL FOR THE ENTIRE LINE TOTALLY 2 OR 3 SETS OF NEEDLE BOARDS CAN BE SUPPLIED WITH THE MACHINE THE MACHINE WAS PURCHASED AS SECOND-HAND APPROXIMATELY 7 YEARS AGO AND WAS USED FOR MAKING CARPETS SINCE THEN AS PER OPINION OF THE PLANT TECHNICIAN, THE MAIN BEARING IN THE HOUSING SHOULD BE OKAY. THE MACHINE WAS PURCHASED FROM A MULTINATIONAL COMPANY 7 YEARS AGO AND WAS IN GREAT CONDITION WHEN THE USED MACHINE CHANGED OWNER THE TOTAL INSIDE WIDTH IS 5178mm THE WIDTH ON WHICH THE NEEDLE BOARDS ARE DRILLED WITH HOLES FOR THE NEEDLES IS 4920mm. SO THIS IS THE TOTAL MAXIMUM WIDTH ON WHICH THE MATERIAL WOULD BE NEEDLE PUNCHED. NEEDLE BOARDS INSIDE THE MACHINE: 4 BOARDS ON ONE LINE. NUMBER OF NEEDLES PER METER: ESTIMATED TO BE 5,000 NEEDLES/M, BUT NEEDS TO BE CHECKED. QUANTITY AVAILABLE: 1 Learn More