Search results for: 'machine de'''

REFERENCE NUMBER: T-6840 AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE BRAND: AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE CONSISTING OF: BLEND LINE, 60” WIDE, 4 HOPPERS WITH 12 HEAVY DUTY EXTENDED APRONS & NEW ELECTRONIC WEIGHING SYSTEM (2016). ALL MACHINES COMPLETELY RECONDITIONED IN 2016. OMMI STACK RESERVE, AUTOMATIC COMBO 332, YEAR 2000 SPINNBAU CARD, 2500mm, DOUBLE DOFFER, YEAR 1995, REPORTED ~1500 TO 1800 PPH CAPACITY DEPENDING UPON PRODUCT. AUTOMATEX FA/3000 TC CROSSLAPPER, YEAR 1997, AC DRIVES. BATT DRAFTER, 12 ROLLS. AUTOMATEX PR-100/T PRE-NEEDLER, 60mm STROKE, YEAR 1997 DRAFTER, 5 ROLLS. AUTOMATEX AG 154/TB NEEDLE LOOM, QUAD PUNCH, 50mm STROKE, YEAR 1997 FOUR ROLL STRETCH. METAL DETECTOR. ENTEX TENTER WITH VERTICAL IR HEAT BANKS, YEAR 1997 WINDER, YEAR 1997 PERKINS 4 ROLL CALENDER, NO STEEL ROLLS OR HEAT SYSTEM INCLUDED BUT MIGHT BE NEGOTIATED. EHHARDT+LEIMER GUIDER MODEL SE 11062, YEAR 2013 ENTEC WINDER, YEAR 1997 FINISHED WIDTH REPORTED OF 210" BUT COULD GO WIDER. LINE RAN PRIMARILY GEOTEXTILE & BEDDING PRODUCTS FROM 4.5 TO 10 OZ/YD. QUANTITY: 1 Learn More

REFERENCE NUMBER: L-2533 
MODEL F-70

SIZES AVAILABLE:
1300 X 1000mm
1700 X 1300mm
2500 X 1600mm
3000 X 1600mm

QUANTITY: 1

 

Learn More

REFERENCE NUMBER: L-1723
MAXIMUM FOAM WIDTH: 1800mm
QUANTITY: 1

Learn More

REFERENCE NUMBER: L-4271
BRAND: WEST POINT
YEAR: 1998
QUANTITY: 1

Learn More

M-1696 MARGASA COMPLETE RECYCLING/TEARING LINE, YEAR 2012, WORKING WIDTH 1500mm

2 ROTARY CUTTERS TYPE CMT-900, WORKING WIDTH 900mm, INCLUDING FEEDING CONVEYORS.
1 ELECTRONIC METAL DETECTOR, MOUNTED ON FEEDING CONVEYOR OF THE 1ST CUTTER.
1 PNEUMATIC MATERIAL TRANSPORT WITH SPECIAL FAN FOR RAGS ETC.
1 STATIONARY ZIG-ZAG HUMP MAGNET MOUNTED IN TUBE FOR MATERIAL TRANSPORT.
2 MIXING/ RELAXING STORAGE BINS FOR CUTTED RAGS WITH SPRAYING ROOM
IN FRONT OF:
1 FEEDING MACHINE TYPE CCS-1500, WORKING WIDTH 1500mm, AUTOMATIC PNEUMATIC FEEDING FROM STORAGE BINS, ELECTRONIC LEVEL CONTROL AND DOSING CONVEYOR TO TEARING LINE.
1 RAG TEARING LINE WITH 4 SECTIONS TYPE MASTER MCM-1550-DD, WORKING WIDTH 1500mm, TAMBOUR DIAM. 1000mm.
1 ELECTRONIC CONTROL PANEL FOR THE WHOLE LINE INCL. TOUCH SCREEN AND INVERTER DRIVER FOR SEVERAL MOTORS.
6 FILTER UNITS.

- ALL EQUIPMENT “AS NEW” SINCE RUNNING ONLY A FEW HOURS.
- CAPACITY UP TO 1000KG/HR.

Learn More

C-3796 MARGASA 4-DRUM TEARING LINE, WORKING WIDTH 900mm TO 1500mm, YEAR 2012

MARGASA 4-DRUM TEARING LINE
YEAR: 2012
WORKING WIDTH: 1500mm

CONSISTING OF:

MARGASA CMT-900 ROTARY CUTTERS
WORKING WIDTH: 900mm
QUANTITY: 2

METAL DETECTOR
QUANTITY: 1

PNEUMATIC TRANSPORT
QUANTITY: 1

MAGNETIC DUCT
QUANTITY: 1

BIG STORAGE BOX
QUANTITY: 1

FEEDING
QUANTITY: 1

MARGASA MASTER MCM-1500-DD 4-DRUM TEARING MACHINE
WORKING WIDTH: 1500mm
DRUM DIAMETER: 1000mm
WITH:
PRESSING ROLLER
WITH A LARGE DIAMETER TO COMPACT THE MATERIAL
BEFORE THE FIRST FEED ROLLER OF THE TEARING MACHINE
BEATERS THAT ELIMINATE THE FOREIGN SUBSTANCES
SUCH AS PLASTICS
WOODS
AND BUTTONS
THAT DUE TO WEIGHT HAVE FALLEN ON THE RETURN APRON
RETURN LATTICE
WITH MOTOR-REDUCER OF 1.5 KW
THAT DRIVES THE BIT RETURN LATTICES
OF THE MATERIAL TO BE RECYCLED
QUANTITY: 1

TAKES 4 CONTAINERS TO LOAD

QUANTITY: 1 LINE

Learn More

M-6342 FLEISSNER SLITTER, WORKING WIDTH 4500mm, YEAR 2000

SLITTING MACHINE
MAKE: FLEISSNER
YEAR: 2000
WORKING WIDTH: 4500mm

QUANTITY: 1

Learn More

P-3457 THIBEAU CARD CA11-R3P5PP (LL), WIDTH 3500mm, YEAR 1997

THIBEAU
MODEL: CA 11
TYPE: R3P5PP (LL)
CARDING MACHINE
YEAR: 1997
WORKING WIDTH: 3500mm
DELIVERY WEIGHT 26 to 40 GR/SQM
DELIVERY SPEED UP TO 90m/min
PRODUCTION CAPACITY APPROXIMATELY 700 KILOGRAMS PER HOUR
WEIGHING SYSTEM ACE
WIDTH: 3500mm
TRUTZSCHLER
EXACTAFEED FBK
WIDTH: 3500mm
THE MACHINES ARE IN VERY GOOD CONDITION BECAUSE THEY HAVE BEEN USED FOR SOME MONTHS ONLY
NOW THEY ARE DISMANTLED AND STORED IN DRY WARE HOUSE
THE CARDING MACHINE IS PACKED INTO WOODEN BOXES

QUANTITY: 1

Learn More

C-4294 AUTOMATEX CROSS LAPPER, SPEED 65 M/MIN, WIDTH EXIT 3500mm, YEAR 2006

CROSS LAPPER
BRAND: AUTOMATEX
MODEL: FA 3000 TC
YEAR: 2006
YEAR COMPLETE RENEWED: 2010 FROM COMPANY AUTOMATEX
SPEED: 65 M/MIN
WIDTH ENTRANCE: 3000mm
WIDTH EXIT: 3500mm
IN THIS MACHINERY THE TIMING BELTS
AND CONVEYOR BELTS ARE IN GOOD CONDITIONS
WE WILL DISMANTLED PERSONALLY
AND THERE WILL BE ALSO ALL THE ELECTRICAL CABLES

QUANTITY: 1

Learn More

A-1794 F.O.R MINICARDA CARDING MACHINE, WIDTH 2500mm, SINGLE DOFFER

BRAND: F.O.R
TYPE: MINICARDA
WIDTH: 2500 mm
SINGLE DOFFER
MACHINE USED FOR DEMO IN ONE SHOW ROOM
COMPLETE WITH ALL ELECTRICAL PARTS

QUANTITY: 1

Learn More