Search results for: 'reference number -v-2'

REFERENCE NUMBER: C-2477 THERMOBONDING LINE BEMATIC/BOMBI, WIDTH 2500mm, YEAR 2012 SPECIFICATIONS: THERMOBONDING LINE BEMATIC / BOMBI WORKING WIDTH 2500mm YEAR OF CONSTRUCTION 2012 THE CAPACITY IS APPROX. 500 KG/H MAX DEPENDING ON FIBERS ETC. THE LINE IS SUITABLE FOR A WEIGHT RANGE OF 80 TO 2000 GRAMS / SQM. THE FIBER LAYING CAN BE DONE IN RANDOM, HORIZONTAL OR VERTICAL DIRECTION. THE LINE IS CONSISTING OF: TWO BALE OPENERS FEEDING CONVEYOR BELT FINE OPENER FIBER BLENDING UNIT FEEDING UNIT WITH TWO INFEED ROLLS CARDING GROUP WITH INDEPENDENT MOTOR WITH VARIABLE SPEED CROSS LAPPER OVEN BOMBI COOLING SECTION 4 CUTTING UNITS WITH GUILLOTINE AND ROLLER SYSTEM CABLE ROOM AIR PASSAGES AND FILTERS CONTROL PANELS. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5392 (22065DTY1R) C TRUTZSCHLER FIBER OPENING AND BLENDING LINE FOR NONWOVENS YEAR 1994 CONSISTING OF: - 1 TRUTZSCHLER FIBER PREPARATION MACHINE, TYPE BOAL 1200 - 1 TRUTZSCHLER OPENER, TYPE VFO 1200 - 3 TRUTZSCHLER CONDENSERS, TYPE LVSA - 1 TRUTZSCHLER MATERIAL BIN, TYPE MSV - 3 TRUTZSCHLER VENTILATORS, TYPE TVF 425 - 1 TRUTZSCHLER MULTI MIXER, TYPE MPM 6/1400 - 1 TRUTZSCHLER BALE OPENER, TYPE BEC 1200 - 1 TRUTZSCHLER OPENER, TYPE SFO 12 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: C-1147 CARD WIRE WINDERS E.F, WIDTH 2500MM SPECIFICATIONS: CARD WIRE WINDERS E.F 2500 MM WORKING WIDTH WITH 2 VERTICAL AXLES WITH CHAIN DRIVEN TRANSPORTS, CYLINDER WITH MOTOR AND FREQUENCY VARIATOR 1 MACHINE WITH 14 SPINDLES 1 MACHINE WITH 11 SPINDLES QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: G-9488 NONWOVEN LINES FOR GEOTEXTILES 3200mm TO 5000mm A) NEEDLING LINE FOR GEOTEXTILE B) NEEDLING LINE FOR GEOTEXTILE QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: M-5266 (1313236LH12RX) L MULLER NF 53 NEEDLE LOOM MULLER NF 53 FULLY RECONDITIONED NEEDLE LOOMS SHED MOTION: NORMAL # OF HARNESSES: 12 FRAMES INCORPORATED TAKE DOWN: DOUBLE KNURLED STEEL BINDER THREAD: SYSTEM III WEFT FEED: MUTRAN II PRODUCTION MONITOR: 3 SHIFT PICK CLOCK PICK REPEAT: 8 – 48 PICK CHAIN LINK DRIVE: BRAKE MOTOR / SLOW MOTION POWER: 230/240 VOLT 3 PHASE 60HZ ACCESSORIES: 4 RAIL STOP MOTION, CONE HOLDERS, HEDDLES & DROP WIRES QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5184 (1313243YS12UF) L COSMETIC COTTON PAD MAKING MACHINE (24,000PCS/H) QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5188 (1313211JK12UF) L COTTON PAD MAKING MACHINE (500 PCS/MIN) COTTON PAD MAKING MACHINE MODEL: ZM500 PRODUCTION SPEED: 500 PIECES PER MINUTE DIMENSIONS (LxWxH): 5000mm x 1000mm x 2000mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-2071 (77050YHG6U) DILO LOOM MODEL OD 2 YEAR 1979 WIDTH 2500mm 2500 DILO LOOM IN VERY GOOD CONDITION MODEL OD 2 YEAR 1979 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5148 (121215HNF11U) L COTTON PAD MAKING MACHINE MODEL: YM-01 BREADTH: 1020mm FEEDING FORM: MECHANICAL FREQUENCY CONTROL & TWICE-WEIGHING WEIGHT UNEVENNESS FOR FEEDING: 0.7% ~ 1.7% APPLICABLE FIBER LENGTH: 24 TO 75mm DRAFT MULTIPLE 6 7.3~120.2 OUTPUT PER MACHINE HOUR: 5~25KG TOTAL POWER OF MOTORS: 7.37KG TOTAL WEIGHT OF THE MACHINE: APPROXIMATELY 7.5 TONS TOTAL FLOOR SPACE (LxW): 7500mm x 2000mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5146 (1212KKBCXX11) L ROUND COTTON PADS MAKING MACHINE AUTOMATIC ROUND MAKE UP COTTON PADS MACHINE RAW MATERIAL ROLL AUTOMATIC DELIVER EMBOSSING CUTTING OUTPUT IN ARRANGEMENT WASTE MATERIAL ROLLING AUTOMATIC COUNTING FROM LOADING THE RAW MATERIAL TO FINISHED PRODUCT, ALL AUTOMATIC MECHANICAL DRIVE CUTTING, RUNNING STABILITY, EFFICIENCY CAN MAKE FLAT COTTON PADS AND EMBOSSING COTTON PADS MODEL: HZM-1 PRODUCT DIAMETER: 58mm OR ACCORDING TO CUSTOMER RAW MATERIAL: ABSORBENT COTTON, NON-WOVEN FABRICS WEIGHT: 2300KG VOLTAGE: AC 380V 50/60HZ POWER: 5.5KW CAPACITY 400 PIECES PER MINUTE DIMENSION: 5000x1000x2000mm QUANTITY: 1 Learn More