Search results for: 'roll-m''

REFERENCE NUMBER: L-5056

THREE-BEAM SPUNBOND NONWOVEN LINE – 2400mm

FOR HYGIENE, MEDICAL, INDUSTRIAL, AGRICULTURAL, ETC.

SUITABLE FOR PP RESIN MATERIAL AND FABRIC WEIGHT OF 9 TO 180 GSM

WIDTH: 2400mm

SPEED: 600 METERS PER MINUTE

C-3796 MARGASA 4-DRUM TEARING LINE, WORKING WIDTH 900mm TO 1500mm, YEAR 2012

MARGASA 4-DRUM TEARING LINE
YEAR: 2012
WORKING WIDTH: 1500mm

CONSISTING OF:

MARGASA CMT-900 ROTARY CUTTERS
WORKING WIDTH: 900mm
QUANTITY: 2

METAL DETECTOR
QUANTITY: 1

PNEUMATIC TRANSPORT
QUANTITY: 1

MAGNETIC DUCT
QUANTITY: 1

BIG STORAGE BOX
QUANTITY: 1

FEEDING
QUANTITY: 1

MARGASA MASTER MCM-1500-DD 4-DRUM TEARING MACHINE
WORKING WIDTH: 1500mm
DRUM DIAMETER: 1000mm
WITH:
PRESSING ROLLER
WITH A LARGE DIAMETER TO COMPACT THE MATERIAL
BEFORE THE FIRST FEED ROLLER OF THE TEARING MACHINE
BEATERS THAT ELIMINATE THE FOREIGN SUBSTANCES
SUCH AS PLASTICS
WOODS
AND BUTTONS
THAT DUE TO WEIGHT HAVE FALLEN ON THE RETURN APRON
RETURN LATTICE
WITH MOTOR-REDUCER OF 1.5 KW
THAT DRIVES THE BIT RETURN LATTICES
OF THE MATERIAL TO BE RECYCLED
QUANTITY: 1

TAKES 4 CONTAINERS TO LOAD

QUANTITY: 1 LINE

R-2243 SULZER P7300HP LOOMS, WIDTH 3600mm, YEAR 2008, CAM

SULZER P7300HP
WIDTH: 3600mm
MODEL: P7300HP
TYPE V8 B360 N 2 EP D12 R
YEAR: 2008
WITH IRON PROJECTILE FEEDER - LAST GENERATION (NO CARBON)
AUTOMATIC LUBRICATION
WITH LED LIGHT AND WITH A WEFT TENSIONER SYSTEM CALLED “COBRA”
10 HEALD FRAMES
8 CAMS (2 LOOMS 3/1 - 2 LOOMS 2/2)
10000 HEDDLES
10000 DROPPERS
THERE ARE TWO DIFFERENT TAKE UP ROLLERS: THE ONES WHICH ARE “UNDERGROUND” WITH INSPECTING MACHINE (THESE ARE IN 3600mm)
AND “NORMAL” ONES WHICH ARE 3900mm – CAN CHOOSE ANY ONE
WEFT FEEDERS NOT INCLUDED
LOOMS ALREADY STOPPED AT WAREHOUSE
INSPECTION POSSIBLE
TOP CONDITION

QUANTITY: 4

H-1305 BATT FEEDING SYSTEM - WORKING WIDTH 3000mm

WORKING WIDTH: 3000mm
CONTROL SYSTEM INCLUDED

COMPOSITION OF THE MACHINE:
- LOWER PVC INCLINED CONVEYOR BELT FOR THE TRANSPORT OF THE WEB FROM THE CROSS LAPPER TO THE ENTRANCE OF THE NEEDLE LOOM.
- UPPER PVC COMPRESSION BELT FOR THE PRE-COMPRESSION OF THE WEB BEFORE ENTERING THE FEEDING ROLLS.
- LOWER PVC CONVEYOR AND UPPER PVC BELT DRIVEN BY ONE GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- PAIR OF FEEDING ROLLS WITH PLASTIC FINGERS TO GUIDE THE COMPRESSED WEB CLOSE TO FIRST NEEDLE ZONE OF THE PRE-NEEDLE LOOM. ROLLER PAIR DRIVEN BY GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- BATT FEEDING SYSTEM INSTALLED ON RAIL SYSTEM AND EASY REMOVABLE FOR MAINTENANCE OF THE NEEDLE LOOM

TECHNICAL DATA:
ELECTRICAL INFORMATION:
ELECTRIC: MAIN VOLTAGE 400 V, 50 HZ, 3 PH.
CONTROL VOLTAGE: DC - 24 V / AC - 230 V
OTHER INFORMATION:
AIR PRESSURE (CONSTANT): MIN. 6 BAR (AT SITE)
OPERATOR SIDE LEFT OR RIGHT (IN WEB RUNNING DIRECTION)
LACQUER COATING:
MAIN COLOR OF THE MACHINES: RAL 7035 (LIGHT GREY)
CONTROL CABINET AND CONTROL DESK RAL 7035 (LIGHT GREY)
LABELING: ENGLISH
TECHNICAL DOCUMENTATION: ONE TIME ON CD-ROM (FURTHER SETS AVAILABLE AT ADDITIONAL COST)
LANGUAGE FOR OPERATING INSTRUCTIONS: ENGLISH
LANGUAGE FOR FURTHER DOCUMENTATION (SPARE PART LISTS, WIRING DIAGRAM, ETC): ENGLISH

ENVIRONMENTAL CONDITIONS:
INSTALLATION HEIGHT ABOVE SEA LEVEL: LESS THAN OR EQUAL TO 1,000 METERS
TEMPERATURE: 24° C (±2° C)
RELATIVE HUMIDITY: 65% (±5%)
ABSOLUTE WATER CONTENT: 9 TO 12 G/KG DRY AIR
NOTE: PLEASE MAKE SURE THAT THE TEMPERATURE INSIDE THE CONTROL CABINET DOES NOT EXCEED 450 CENTIGRADE. IN CASE OF EXCESSIVE ROOM TEMPERATURES WE RECOMMEND AN AIR-CONDITIONING SYSTEM FOR THE CONTROL CABINETS TO AVOID MALFUNCTION OF ELECTRICAL COMPONENTS

QUANTITY: 1

V-1360 SANTEX THERMOBONDING COMPRESSION OVEN FOR NONWOVENS ON ROLL, 80 TO 400 G/M, YEAR 1986

WORKING WIDTH: 2500mm
ROLL FACE WIDTH: WORKING WIDTH + 50mm
MATERIAL FIBERS: NONWOVEN WEB OF POLYESTER OR DIFFERENT FIBERS MIXED WITH 10 TO 25% POLYESTER BI-COMPONENT BINDER FIBERS OR DIFFERENT BINDER FIBERS
MACHINE SPEED: 1 TO 20 M/MIN. (OTHERS UPON REQUEST)
COMPOSITION OVEN: 2 HEATING ZONES OF 2 M EACH + 1 COOLING SECTION

QUANTITY: 1

V-1325 FEHRER NEEDLE LOOM MODEL NL21/S, WIDTH 3000mm, YEAR 1986 – 5000 NEEDLES/METER

NEEDLE LOOM
MAKE: FEHRER
MODEL: NL21/S
WIDTH: 3000mm
YEAR: 1986
NEEDLE PATTERN 2 X 5000 PATTERN K1 (300mm FRONT TO BACK)
TOTAL 6 SECTION BOARDS 1000mm WIDE EACH
STROKE 35mm
1800 RPM
OUTLET ROLLER 200mm DIAMETER

QUANTITY: 1

C-4185 DILO DI-LOOM HYPERPUNCH OD-II HSCL 35 FINISHING NEEDLE LOOM, WORKING WIDTH 3500mm, YEAR 2007

DILO DI-LOOM HYPERPUNCH OD-II HSCL 35 FINISHING NEEDLE LOOM
YEAR: 2007
WORKING WIDTH: 3500mm

QUANTITY: 1

C-4184 DILO DI-LOOM EMPC HYPERPUNCH OUG-II HVASCL 35 FINISHING NEEDLE LOOM, WORKING WIDTH 3500mm, YEAR 2007

DILO DI-LOOM EMPC HYPERPUNCH OUG-II HVASCL 35 FINISHING NEEDLE LOOM
YEAR: 2007
WORKING WIDTH: 3500mm
WITH DILO DBF 35/5 CBF WITH 3 DRAFTING ROLLERS

QUANTITY: 1

V-1278 TAYLOR STILES 536 X 4 BLADE MACHINE, WIDTH 36”

MAKE: TAYLOR STILES
536 X 4 BLADE MACHINE
THEY HAVE 12’ INFEED CONVEYORS
36” WIDE BLADES

QUANTITY: 2

C-4028 TUBETEX (PAS) TUBULAR COMPACTOR MACHINE, YEAR 2006

TUBETEX (PAS) TUBULAR COMPACTOR MACHINE
YEAR: 2006
ENTRY UNIT
OPERATOR PLATFORM
FABRIC STRETCHER

QUANTITY: 1