Search results for: 'pre n'

P-5079 COMMERCIAL JOPER CAST IRON CRM-30 ROASTER 30 KILOS

WHAT WE HAVE HERE IS A VERY RUGGED CAST IRON ROASTING FRAME AND ROASTING CONTACT CLEARANCES WITH THE MACHINE - JUST PLAIN SOLID AND DOES NOT MOVE UNDER LONG OR EXTENDED USE. DOUBLE WALL DRUM MEANS THAT THE HEAT IS ALL DESIGNED TO GO THROUGH THE CENTER OF THE ROASTING CHAMBER, NOT "ONTO" THE DRUM EXTERIOR. TOTAL TRUE CONVECTION. NOT ONLY IS THIS THE SAME STYLE FROM THE OLD GOTHOT & BARTH ROASTER DAYS. . . BUT EVEN BETTER AS THE SHAFT DESIGN SO THAT BEARINGS ARE EXTERNALLY MOUNTED AND ADDITIONALLY ARE AIR COOLED FOR LONG LIFE AND TROUBLE-FREE CONTROL. EVEN THE SIDE PANELS OR PRODUCT FLIGHTS HAVE A LONGER CURVE POSITIONING MORE PRODUCT FLOW INTO THE HOT AIR STREAM, RESULTING IN A SLIGHTLY MORE RAPID ROAST WITH MORE EVEN BEAN INTERIOR AND EXPANSION THAT FRANKLY LEADS THE INDUSTRY.

ALL THIS COMMENTARY ABOVE MEANS THIS ROASTER SIMPLY IS MORE QUIET THAN ANYTHING ON THE MARKET. PERIOD. THERMAL INSULATION WITH HIGHEST QUALITY OF FIBER FOR LOW GAS CONSUMPTION; DIGITAL TEMPERATURE CONTROL. CYCLONE IS SEPARATE. THE COOLER, BEING TOTALLY SEPARATE ALSO HAS THE LARGEST AIR COLLECTION AREA OF ANY ROASTER MADE ALLOWING FOR TOTAL AMBIENT COOL COFFEE IN LESS THAN THREE MINUTES. ADD TO THIS PACKAGE A LOADER OR YOUR CHOICE OF DESTONERS AND EVEN YOUR CHOICE OF CONTROL METHODS.

DATA INFORMATION:
BATCH CAPACITY: 30 KG / 66 LBS
CONTROL DESIGN: MANUAL
CAPACITY PER HOUR: 120 KG / 265 LBS
ROASTING TIME: 12-18 MIN (4 BATCHES AN HOUR)
EXHAUST AIR TREATMENT: OPTIONAL
COOLING CYCLONE: OPTIONAL
PRE-COOLING WITH WATER IN DRUM: OPTIONAL
COOLING TIME: 3-4 MIN
TYPE OF COOLING: AIR AMBIENT
SAFETY DEVICE: YES
BURNER POWER: 110 KW / 375000 BTU
BURNERS MANUFACTURER: RIELLO
OPERATION TYPE BURNER: BS2D-2 STAGE
FUEL TYPE: PROPANE/NAUTRAL GAS/DIESEL
SIDE OF OPERATION: LEFT
POWER REQUIREMENTS: 20 AMP
VOLTAGE/FREQUENCY/PHASES: 400+N-230 V / 50-60 HZ / 3 PH
9 AMP. . . 3 PHASE 50/60 HZ PREFERRED, YOUR CHOICE OF 220/440 - SINGLE PHASE AVAILABLE AT SPECIAL REQUEST
(NOTE ON 3 PHASE. . . NOT ONLY IS IT LESS EXPENSIVE TO OPERATE, BUT IT RUNS MORE QUIETLY THAN SINGLE PHASE WHENEVER OR WHEREVER IT IS USED. KEEP THIS IN MIND FOR ANY MACHINERY.)
Ø EXHAUST CHIMNEY (ROASTER CYCLONE): 250MM / 9,8 INCH
Ø EXHAUST CHIMNEY (COOLER): 250MM / 9,8 INCH
Ø HOPPER ROAST CHIMNEY: 150MM / 5,9 INCH
ROASTER WEIGHT WITH CYCLONE: 1050 KG / 2310 LBS
COOLER WEIGHT: 300 KG / 660 LBS
ROASTER FAN MOTOR: 1, 5 HP
COOLER FAN: 4 HP
DRUM GEARBOX: 1 HP
COOLER GEARBOX: 0, 75 HP
BUILT TO UL295 STANDARDS.

QUANTITY: 1

P-5078 JOPER CAST IRON SHOP BATCH ROASTER 25 KILOS

THE NEW JOPER CAST IRON ROASTER - THE TIMELESS TRADITION OF THE FAMOUS UG22 - IMPROVED AND PRESERVED. WITH GREAT CONTROL OPTIONS AS WELL. PATTERNED AFTER AND IMPROVED UPON THE FAMOUS UG22.

ATTRIBUTES SIMILAR TO PROBAT. CAST IRON CONSTRUCTION. ROASTING PROCESS USES HOT AIR SYSTEM AND HAS
CYCLONE SEPARATE FROM ROASTER. CYLINDER IS NOT DRILLED AND HAS SPECIAL BLADES WHICH PROVIDES EXCELLENT MOVEMENT OF THE BEANS. COMPLETE ELECTRIC CONTROL BOARD WHICH STARTS THE ROASTING CYCLE AND BUILT IN SOUND AND LIGHT ALARMS.
TWO MODELS: GAS AND PROFILE (AUTOMATIC)

JOPER CAST IRON SHOP BATCH 25 KILO ROASTER

THE NEW JOPER CAST IRON ROASTER - THE TIMELESS TRADITION OF THE FAMOUS UG22 - IMPROVED AND PRESERVED. WITH GREAT CONTROL OPTIONS AS WELL. PATTERNED AFTER AND IMPROVED UPON THE FAMOUS UG22.

ATTRIBUTES SIMILAR TO PROBAT. CAST IRON CONSTRUCTION. ROASTING PROCESS USES HOT AIR SYSTEM AND HAS
CYCLONE SEPARATE FROM ROASTER. CYLINDER IS NOT DRILLED AND HAS SPECIAL BLADES WHICH PROVIDES EXCELLENT MOVEMENT OF THE BEANS. COMPLETE ELECTRIC CONTROL BOARD WHICH STARTS THE ROASTING CYCLE AND BUILT IN SOUND AND LIGHT ALARMS.
TWO MODELS: GAS AND PROFILE (AUTOMATIC)

PRICES
MODEL BSR25 - 25 KILO GAS OR PROPANE $46,560
MODEL BPR25 - 25 KILO ROAST PROFILE SYSTEM $54,690
OPTIONAL ACCESSORIES:
JOPER DESTONER (INCLUDES FAN) $8,500
JOPER GREEN BEAN LOADER $7,030
CUSTOM COLOR AVAILABLE. SEE RAL COLOR CHART BELOW.

NOTE: CRATING AND FREIGHT COSTS ARE NOT INCLUDED. ORIGIN IS EUROPE.

DUE TO THE HUGE INCREASE IN ORDERS WE NOW HAVE TO CONTEND WITH LEAD TIMES FOR 5 TO 7 MONTHS AND MAYBE A LITTLE LONGER IN SOME CASES . . . FRUSTRATING, BUT REAL.

PROFILE ROAST CONTROL OPTION

THE JOPER 25 KILO ROASTER OPTION WITH THE TOUCH SCREEN PROFILE CONTROL COMES WITH A BRIGUS COFFEE ROAST CONTROL & LOG SYSTEM. THIS WAS SPECIALLY CREATED TO WORK WITH THE BPR ROASTERS FROM JOPER. TOGETHER, THEY ARE THE TRUE MASTER OF COFFEE ROAST. BRIGUS (BRE 'GOS) IS A NEW CONCEPT OF COFFEE ROASTING CONTROL SYSTEM.
WITH IT, ATTENTION AND EXPERTISE WILL BE CONCENTRATED ON WHAT MATTERS:
DEFINE NEW PROFILES BASED ON STORED ONES
ROAST BASED ON A PRE-DEFINED PROFILE
MANUAL OR AUTOMATIC PROCESS CONTROL
ROASTING VS. DESIRED PROFILE EVOLUTION DURING PROCESS
REGISTER OCCURRENCES, EVENTS AND NOTES
RECORD ALL PROCESS
ANALYZE AND COMPARE ROAST BATCHES

TECHNICAL SPECIFICATIONS FOR BSR-25 & BPR-25:
BATCH CAPACITY: 25 KG. / 55 POUNDS
CONTROL DESIGN: MANUAL
CAPACITY PER HOUR: 100 KG. / 220 POUNDS
ROASTING TIME: 15-18 MIN.
EXHAUST AIR TREATMENT: OPTIONAL
COOLING TIME: 3 MIN.
TYPE OF COOLING: AIR AMBIENT
SAFETY DEVICE: YES
OPERATION TYPE BURNER: MODULATING
FUEL TYPE (GAS OVEN): PROPANE OR NATURAL GAS
POWER REQUIREMENTS: 20 AMP
VOLTAGE: 380/50/3 OR 230/60/3 V/HZ/PH
Ø EXHAUST CHIMNEY (ROASTER CYCLONE): 150 MM / 5.9 INCHES
Ø EXHAUST CHIMNEY (COOLER): 150 MM / 5.9 INCHES
ROASTER WEIGHT WITH COOLER AND CYCLONE: 850 KG. / 1874 POUNDS
BURNER POWER: 52 KW / 177431 BTU
ROASTER FAN MOTOR: 1,5 HP
COOLER FAN MOTOR: 2 HP
DRUM GEARBOX: 1 HP
COOLER GEARBOX: 0,75 HP
ROASTER FAN (NORMAL WORK CONDITIONS RUNNING AT 60HZ. DAMPER 70 %): 587 M3/H/345 CFM (587 X .589= X 345 CFM)
COOLER FAN (RUNNING AT 60HZ): 1465 M3/H/862 CFM
BUILT TO UL295 STANDARDS.

QUANTITY: 1

P-5073 TRABATTONI WOOD FIRED ROASTER 15/17 KILOS

WOOD FIRE 15/17 KGS. COFFEE ROASTER OF RAW COFFEE FOR ANY BATCH, COOLING AND MIXING TANK, WOOD HEATING, TWO SEPARATE FANS FOR COOLING AND EXHAUST AIR ROASTING SUCTION, ELECTRIC PANEL, STAINLESS STEEL CHAFF COLLECTOR, ANY RAL PAINTING COLOR YOU PREFER. VERY HEAVY BASE - AS THE ENTIRE BOTTOM OF THIS ROASTER IS OLD WORLD CAST IRON - MAKE QUITE A VISUAL STATEMENT.

POWER-OPTIONS:
WOOD HEATING
GAS HEATING: (18.000 KCAL/HR)

SPECIFICATIONS:
DIMENSIONS: 99 INCHES LONG X 85 INCHES WIDE X 82 INCHES HIGH
ELECTRICAL CAN BE EITHER 220 VOLT, SINGLE PHASE OR 3 PHASE BOWER AND SPECIFY IF YOUR COUNTRY USES 50HZ OR 60HZ. WE LIKE THE 3 PHASE MOTORS THE BEST AS THEY RUN MORE QUIET

QUANTITY: 1

P-5072 STA IMPIANTI ROASTER 15 KILOS

ROASTING MACHINES LINE PARTICULARLY SUITABLE FOR ARTISANAL SPECIALIZED ACTIVITIES IN MEDIUM BATCHES OF HIGH-QUALITY ROASTED COFFEE, SUCH AS ARTISAN MARKET OR COFFEE SHOPS. TECHNOLOGICALLY ADVANCED, CONFIRMS THEMELVES AS IDEAL TOOL FOR ROASTING COMPANIES SPECIALIZED IN SELECTED COFFEES OF HIGHER QUALITY. MADE WITH THE SAME REQUIREMENTS FOR RELIABILITY AND SECURITY FEATURES OF THE BIGGER AND MORE SOPHISTICATED INDUSTRIAL ROASTING MACHINES, ARE AVAILABLE WITH HEATING GENERATOR TYPE GAS OR DIESEL-FUEL BURNER AT MULTIPLE LEVELS OF FLAME AND MANUAL OR AUTOMATIC CONTROL SYSTEM.

TECHNICAL DATA:
ROASTER CAPACITY: 15 KG. | MAX. 19 KG./ CYCLE
ROASTING CYCLE: 9 MINUTES ÷ 20
RAW COFFEE PROCESSING PER HOUR: 60 KG. ÷ 90
INSTALLED ELECTRIC POWER: 1,8 KW | 380 VOLT THREEPHASE + NEUTRAL 50 HZ
THERMAL POWER: 24,000 KCAL/H/ 29 KW.
(NATURAL GAS OR LPG)

MAIN COMPONENTS:
HOPPER OF CHARGE IN STAINLESS STEEL
ROASTING DRUM
HEATING GENERATOR OF NEW GENERATION PATENTED AND COMPLETE OF BURNER
RAMP VALVES FOR GAS SAFETY AND ELECTRIC DEVICE TO CHECK FLAMES RATIFIED AND COMPLETE OF ALARM SIGNAL.
COOLING TANK IN STAINLESS STEEL WITH DOOR FOR CLEANING OPERATIONS
SAFETY PREVENTION SYSTEM ON THE COOLING TANK
SUPPORTING FRAME FOR THE OVER INDICATED COMPONENTS
ELECTRIC CONTROL BOARD TO CHECK AND CONTROL THE MACHINE ACCORDING CE RULES, COMPLETE OF PLC + TOUCH SCREEN FOR MACHINE MANAGEMENT AND TEMPERATURES SIGHT.
INDEPENDENT FANS FOR THE ROASTING DRUM AND THE COOLING TANK
INDEPENDENT MOTORS FOR THE ROASTING DRUM AND THE COOLING TANK
CYCLONE FOR CHAFFS COLLECTING

DETAILS OF COMPONENTS:
HOPPER OF CHARGE IN STAINLESS STEEL WITH MANUAL IN-LET OF COFFEE AND DOOR UNLOADING SYSTEM
ROASTING DRUM: MADE BY A FIXED ELEMENT WITH DOUBLE WALLS INSULATED FOR THERMAL PROTECTION AND SUPPORT OF THE ROTATING CYLINDER MOVING THE PRODUCT. SUCH CYLINDER, COMPLETELY MADE IN COMPOUND STEEL TO OVERCOME THE THERMAL CHANGES, IS DEVELOPED WITH A PERFORATED PLATE FOR THE CONTAINMENT AND SPECIAL BLENDERS ON THE RIGHT AND LEFT SIDE PLACED ON DIFFERENT LEVELS TO GET A PERFECT BLENDING OF COFFEE. AT THE END OF THE ROASTING CYCLE, A WIDE DOOR WITH MANUAL OPENING/CLOSING SYSTEM ALLOWS THE PRODUCT UNLOADING.
HEATING GAS GENERATOR OF NEW CONCEPT, PATENTED, COMPLETE OF BURNER, RAMP VALVES FOR GAS SAFETY AND ELECTRONIC EQUIPMENTS FOR FLAME CONTROL RATIFIED AND COMPLETE OF SIGNALLING ALARM (N°2 FLAME LEVELS)
COOLING TANK IN STAINLESS STEEL: WIDE SURFACE PERFORATED WITH 3 ARMS AND CROSSED FLOWS. UNLOADING MOUTH WITH HAND DRIVE.
SUPPORTING FRAME: MONO-BLOCK, PLATE PRESS-BENDED, STEEL MADE, SUPPORTING THE ELEMENTS PREVIOUSLY DESCRIBED.
SAFETY PROTECTION FOR COOLING TANK
ELECTRIC CONTROL BOARD FOR MACHINE MANAGEMENT ACCORDING CE RULES INTEGRATED.
COMPLETE OF PLC + TOUCH SCREEN FOR MACHINE MANAGEMENT AND TEMPERATURES VISUALIZATION.
POSSIBLE RECORDING OF ROASTING PARAMETERS.
CYCLONE FOR CHAFFS COLLECTING
INDEPENDENT MOTORIZATION FOR ROASTING DRUM AND COOLING TANK
INDEPENDENT ELECTRIC-FAN FOR ROASTING DRUM AND ELECTRIC FAN FOR COOLING TANK.

QUANTITY: 1

P-5068 SAN FRANCISCAN 12 KILOS 25 POUNDS ROASTER

INCLUDES ROASTER, AFTERBURNER, AMBIENT AND BEAN TEMPERATURE PROBES WITH DUAL DIGITAL DISPLAY. ALSO, THE
HIGH QUALITY GAS MANIFOLD ALLOWS YOU TO MEASURE THE BTU INPUT. COMES CHAFF COLLECTOR. BOTH THE AFTERBURNER AND CHAFF COLLECTOR ARE COMBINED IN THE CYLINDER BEHIND THE ROASTER. EXCELLENT, AFFORDABLE CHOICE FOR THE CONTINUOUS COFFEE ROASTER. IT ROASTS AND COOLS AT THE SAME TIME. 4 BATCHES/HOUR. MINIMAL MAINTENANCE. PIPES ARE BUILT ON THE EXTERIOR SO EASY TO CLEAN. TERMS: 50% DEPOSIT AND BALANCE PRIOR TO SHIPMENT. ALLOW 60-90 DAYS FOR ASSEMBLY!

SPECIFICATIONS:
36 INCHES X 96 INCHES FLOOR SPACE REQUIRED
4 BATCHES/HR =100 LBS/HR
VOLTAGE 220V SINGLE PHASE
AMPS 15 AMPS
BTU 100,000
GAS PRESSURE: 7 INCHES W/C NAT GAS OR 11 INCHES W/C PROPANE
FACE PLATES: 5/8 INCHES STEEL
WEIGHT 1350 LBS ROASTER + AFTERBURNER= 2100 LBS

QUANTITY: 1

P-5065 TRABATTONI WOOD FIRE ROASTER 10 to 12 KILOS

TRABATTONI
WOOD FIRE ROASTER
10 to 12 KILOS OF RAW COFFEE FOR ANY BATCH, COOLING AND MIXING TANK, WOOD HEATING, TWO SEPARATE FANS FOR COOLING AND EXHAUST AIR ROASTING SUCTION, ELECTRIC PANEL, STAINLEESS STEEL CHAFF COLLECTOR, ANY RAL PAINTING COLOR YOU PREFER. VERY HEAVY BASE-AS THE ENITRE BOTTOM OF THIS ROASTER IS OLD WORLD CAST IRON-MAKE QUITE A VISUAL STATEMENT.

POWER OPTIONS:
WOOD HEATING
GAS HEATING (14.000 Kcal/hr)

SPECIFICATIONS:
DIMENSIONS: 69 INCHES LONG x 41 INCHES LONG x 67 INCHES HIGH
EXHAUST TUBE: 6 INCHES
COOLING TUBE: 6 INCHES
CAGE DIMENSIONS: 83 INCHES LONG x 85 INCHES WIDE x 82 INCHES HIGH
NET WEIGHT: 1433 POUNDS
ELECTRICAL CAN BE WITHER 220 VOLT, SINGLE PHASE OR 3 PHASE BOWERAND SPECIFY IF YOUR COUNTRY USES 50Hz OR 60Hz. WE LIKE THE 3 PHASE MOTORS THE BEST AS THEY RUN MORE QUIETLY.

QUANTITY: 1

P-5047 STA IMPIANTI ROASTER 10 KILOS

STA
MODEL: IMPIANTI
ROASTER
10 KILOS
ROASTING MACHINES LINE, PARTICULARLY SUITABLE FOR LITTLE PRODUCTION ACTIVITIES OF HIGH QUALITY ROASTED COFFEE, SUCH AS SHOPS, PASTRIES OR ARTISANAL LABORATORIES. SMALL SIZE, TECHNOLOGICALLY ADVANCED, CONFIRM THEM ELVES AS IDEAL TOOL FOR THE PRODUCTION OF SELECTED COFFEES IN LITTLE QUANTITY. MADE WITH THE SAME REQUIREMENTS FOR RELIABILITY AND SECURITY FEATURES OF THE BIGGER AND MORE SOPHISTICATED INDUSTRIAL ROASTING MACHINES, ARE AVAILABLE WITH HEATING GENERATOR TYPE GAS BURNER ( AVAILABLE ALSO BY ELECTRIC RESISTANCES ) AND AUTOMATIC CONTROL SYSTEM WITH SEMIAUTOMATIC MANAGEMENT.

TECHNICAL DATA:
ROASTER CAPACITY: 10 KG. / MAX. 13 KG. CYCLE
ROASTING CYCLE: 9 MINUTES ÷ 20
RAW COFFEE PROCESSING PER HOUR: 40 KG. ÷ 60
INSTALLED ELECTRIC POWER: 1,5 KW, SINGLEPHASE: 220 VOLT, 50 HZ | SPECIAL TRIPLEPHASE: 220 VOLT, 60 HZ
THERMAL POWER (NATURAL GAS OR LPG): 16000 KCAL/H

MAIN COMPONENTS:
HOPPER OF CHARGE IN STAINLESS STEEL
ROASTING DRUM
HEATING GENERATOR OF NEW GENERATION, PATENTED AND COMPLETE OF BURNER
RAMP VALVES FOR GAS SAFETY AND ELECTRIC DEVICE TO CHECK FLAMES RATIFIED AND COMPLETE OF ALARM SIGNAL
COOLING TANK IN STAINLESS STEEL
SAFETY PREVENTION SYSTEM ON THE COOLING TANK
SUPPORTING FRAME FOR THE OVER INDICATED COMPONENTS
ELECTRIC CONTROL BOARD ACCORDING CE RULES, INTEGRATED, COMPLETE OF PLC + TOUCH SCREEN DEVICE FOR ROASTING MACHINE CONTROL AND MANAGEMENT
POSSIBLE RECORDING OF ROASTING PARAMETERS
INDEPENDENT FANS FOR THE ROASTING DRUM AND THE COOLING TANK
INDEPENDENT MOTORS FOR THE ROASTING DRUM AND THE COOLING TANK
CYCLONE FOR CHAFFS COLLECTING

DETAILS OF COMPONENTS:
HOPPER OF CHARGE IN STAINLESS STEEL WITH MANUAL IN-LET OF COFFEE WITH DOOR UNLOADING SYSTEM
ROASTING DRUM: MADE BY A FIXED ELEMENT WITH DOUBLE WALLS INSULATED FOR THERMAL PROTECTION AND SUPPORT OF THE ROTATING CYLINDER MOVING THE PRODUCT. SUCH CYLINDER, COMPLETELY MADE IN COMPOUND STEEL TO OVERCOME THE THERMAL CHANGES, IS DEVELOPED WITH A PERFORATED PLATE FOR THE CONTAINMENT AND SPECIAL BLENDERS ON THE RIGHT AND LEFT SIDE PLACED ON DIFFERENT LEVELS TO GET A PERFECT BLENDING OF COFFEE. AT THE END OF THE ROASTING CYCLE, A WIDE DOOR WITH MANUAL OPENING/CLOSING SYSTEM ALLOWS THE PRODUCT UNLOADING.
HEATING GAS GENERATOR OF NEW CONCEPT, PATENTED, COMPLETE OF BURNER, RAMP VALVES FOR GAS SAFETY AND ELECTRONIC EQUIPMENTS FOR FLAME CONTROL RATIFIED AND COMPLETE OF SIGNALLING ALARM (N°2 FLAME LEVELS).
COOLING TANK IN STAINLESS STEEL: WIDE SURFACE PERFORATED WITH TWO ARMS AND CROSSED FLOWS. UNLOADING MOUTH WITH HAND DRIVE.
SUPPORTING FRAME: MONO-BLOCK, PLATE PRESS-BENDED, STEEL MADE, SUPPORTING THE ELEMENTS PREVIOUSLY DESCRIBED.
SAFETY PROTECTION FOR COOLING TANK
ELECTRIC CONTROL BOARD ACCORDING CE RULES INTEGRATED, COMPLETE OF PLC + TOUCH SCREEN FOR ROASTING MACHINE CONTROL AND MANAGEMENT.
POSSIBLE RECORDING OF ROASTING PARAMETERS
CYCLONE FOR CHAFFS COLLECTING
INDEPENDENT MOTORIZATION FOR ROASTING DRUM AND COOLING TANK
INDEPENDENT ELECTRIC-FAN FOR ROASTING DRUM AND ELECTRIC-FAN FOR COOLING TANK.

QUANTITY: 1

P-5044 STA IMPIANTI ROASTER 5 KILOS

STA
MODEL: IMPIANTI
ROASTER
5 KILOS
STA IS A MANUFACTURING GROUP IN ITALY - THAT IS MADE UP OF SEASONED ENGINEERS FROM MOST OF THE BIG OLD ITALIAN ROASTING MACHINE MAKERS - SO THEIR SCOPE OF KNOWLEDGE AND HISTORY IS FANTASTIC. BASICALLY - THEIR CLAIM TO FAME IS HOT AIR INTRODUCED INTO THE TOP OF THE ROASTING CHAMBER . . . BEING PULLED THROUGH THE TURBULATING COFFEE AND EXITING THROUGH DRUM PERFORATIONS INTO THE BOTTOM. FIRST, THAT MAKES IT REALLY FRIENDLY TO BLENDING FORMULAS AND SECOND IT MAKES FOR SMALLER CHAFF - AS THE TURNING COFFEE BEATS IT UP A LITTLE AND THUS THE ROAST COMES OUT MORE CLEAN THAN THE OLD DAYS OF SOME SOLID DRUMS . . . SO IT IS DIFFERENT - WHICH DOES NOT MAKE IT BETTER - BUT IF YOU HAVE A BACKGROUND ON JABEZ BURNS . . THEN YOU WILL REALLY LOVE THIS PRODUCTION. BIG NATURALLY DEVELOPED BEANS - VERY EVEN ROAST. FOLLOWING IS THE MANUFACTURERS SPECS AND WE WILL BE GLAD TO DISCUSS MORE IN-DEPTH AS YOU HAVE QUESTIONS.

ROASTING MACHINES LINE, PARTICULARLY SUITABLE FOR LITTLE PRODUCTION ACTIVITIES OF HIGH QUALITY ROASTED COFFEE, SUCH AS SHOPS, PASTRIES OR ARTISAN LABORATORIES. SMALL SIZE, TECHNOLOGICALLY ADVANCED, CONFIRM THEM ELVES AS IDEAL TOOL FOR THE PRODUCTION OF SELECTED COFFEES IN LITTLE QUANTITY. MADE WITH THE SAME REQUIREMENTS FOR RELIABILITY AND SECURITY FEATURES OF THE BIGGER AND MORE SOPHISTICATED INDUSTRIAL ROASTING MACHINES, ARE AVAILABLE WITH HEATING GENERATOR TYPE GAS BURNER (AVAILABLE ALSO BY ELECTRIC RESISTANCES) AND AUTOMATIC CONTROL SYSTEM WITH SEMIAUTOMATIC MANAGEMENT.

TECHNICAL DATA:
ROASTER CAPACITY: 5 KG. - MAX. 7 KG. CYCLE
ROASTING CYCLE: 9 MINUTES ÷ 20
RAW COFFEE PROCESSING PER HOUR: 20 KG. ÷ 30
INSTALLED ELECTRIC POWER: 0.9 KW | SINGLEPHASE 220 VOLTS 50 HZ
THERMAL POWER (NATURAL GAS OR LPG): 8000 KCAL/H
MAIN COMPONENTS:
HOPPER OF CHARGE IN STAINLESS STEEL
ROASTING DRUM
HEATING GENERATOR OF NEW GENERATION, PATENTED AND COMPLETE OF BURNER
RAMP VALVES FOR GAS SAFETY AND ELECTRIC DEVICE TO CHECK FLAMES RATIFIED AND COMPLETE OF ALARM SIGNAL
COOLING TANK IN STAINLESS STEEL
SAFETY PREVENTION SYSTEM ON THE COOLING TANK
SUPPORTING FRAME FOR THE OVER INDICATED COMPONENTS
ELECTRIC CONTROL BOARD MADE ACCORDING CE RULES, INTEGRATED, COMPLETE OF PLC + TOUCH SCREEN DEVICE FOR ROASTING MACHINE CONTROL AND MANAGEMENT.
INDEPENDENT FANS FOR THE ROASTING DRUM AND THE COOLING TANK
INDEPENDENT MOTORS FOR THE ROASTING DRUM AND THE COOLING TANK
CYCLONE FOR CHAFFS COLLECTING
DETAILS OF COMPONENTS:
HOPPER OF CHARGE IN STAINLESS STEEL WITH MANUAL IN-LET OF COFFEE WITH DOORUNLOADING SYSTEM.
ROASTING DRUM: MADE BY A FIXED ELEMENT WITH DOUBLE WALLS INSULATED FOR THERMAL PROTECTION AND SUPPORT OF THE ROTATING CYLINDER MOVING THE PRODUCT. SUCH CYLINDER, COMPLETELY MADE IN COMPOUND STEEL TO OVERCOME THE THERMAL CHANGES, IS DEVELOPED WITH A PERFORATED PLATE FOR THE CONTAINMENT AND SPECIAL BLENDERS ON THE RIGHT AND LEFT SIDE PLACED ON DIFFERENT LEVELS TO GET A PERFECT BLENDING OF COFFEE. AT THE END OF THE ROASTING CYCLE, THE PRODUCT UNLOADING IS ALLOWED BY A WIDE DOOR WITH MANUAL OPENING/CLOSING SYSTEM.
HEATING GAS GENERATOR OF NEW CONCEPT, PATENTED, COMPLETE OF BURNER, RAMP VALVES FOR GAS SAFETY AND ELECTRONIC EQUIPMENTS FOR FLAME CONTROL RATIFIED AND COMPLETE OF SIGNALLING ALARM.
COOLING TANK IN STAINLESS STEEL: WIDE SURFACE PERFORATED WITH TWO ARMS AND CROSSED FLOWS. UNLOADING MOUTH WITH HAND DRIVE.
SUPPORTING FRAME: MONO-BLOCK, PLATE PRESS-BENDED, STEEL MADE, SUPPORTING THE COMPONENTS PREVIOUSLY DESCRIBED.
SAFETY PROTECTION FOR COOLING TANK
ELECTRIC CONTROL BOARD FOR MACHINE MANAGEMENT ACCORDING CE RULES INTEGRATED. COMPLETE OF PLC + TOUCH SCREEN FOR ROASTING MACHINE CONTROL AND MANAGEMENT.
POSSIBLE RECORDING OF ROASTING PARAMETERS
CYCLONE FOR CHAFFS COLLECTING.
INDEPENDENT MOTORIZATION FOR ROASTING DRUM AND COOLING TANK
INDEPENDENT ELECTRIC-FAN FOR ROASTING DRUM AND ELECTRIC –FAN FOR COOLING TANK.

QUANTITY: 1