Search results for: 'machi''

R-3268 HAS GARANTI ROASTER - 60 KILOS

BUILT 2013 & NEVER USED
DIMENSIONS: 91" H X 69" W X 104" D/ 2300 H X 1750 W X 2650 D mm
2,535 LBS. / 1,150 KG.
220 VAC
NATURAL GAS
INCLUDES LOADER AND DESTONER

THIS MACHINE IS LISTED HERE UNDER SOME DEGREE OF FRUSTRATION - AS THE SELLER BOUGHT THE MACHINE FOR A PROJECT (WITH CONSULTANT'S ADVISE) AND THE PROJECT TOTALLY GOT CHANGED AROUND AND THE ROASTER WAS SIMPLY NEVER NEED, NEVER INSTALLED, NEVER USED. AND TO MAKE MATTERS WORSE, THEIR BUILDING HAS NO NATURAL GAS ANYWHERE CLOSE. SO, HERE IS A TOTALLY NEW MACHINE - AS MAYBE 20 TO 30% LESS THAN BUYING IT BRAND NEW. AND IT IS SITTING RIGHT HERE IN THE US IN SOUTHERN CALIFORNIA. INCLUDES LOADER AND STONER.
BOTTOM LINE. THIS IS A SERIOUS MACHINE, REALLY EASY TO WORK ON, REALLY EASY TO RUN AND AVAILABLE IMMEDIATELY.

QUANTITY: 1

R-3248 DIEDRICH IR-12 ROASTER - 12 KILOS

HERE IS THE CLASSIC DIEDRICH IR12. USED, 1989 WITH SOME NICE UPGRADES TO THE MANUAL ELECTRONICS. THE MACHINE HAS BEEN IN CONSTANT MECHANICAL WATCHFULNESS - AND THIS IT IS IN VERY NICE CONDITION. ONCE THIS MACHINE GETS RE-INSTALLED YOU WILL NEED TO ADJUST THE DRUM (THIS IS NORMAL ACTIVITY. AND AS WE TESTED IT DURING OUR REVIEW THE HIGH TEMP LIMIT SWITCH DID NOT SEEM TO SHUT ENGAGE AS WE WOULD HAVE EXPECTED, BUT WE DID NOT HAVE OUR TOOL KIT WITH US FOR ACTUAL DETAIL ANALYSIS. WE DID FIND THAT THE BEARINGS WERE NEW AND EVERYTHING SEEMS TO WORK GREAT. THE HIGH TEMP THING MIGHT HAVE JUST BEEN SET HIGHER THAN NORMAL. AS THIS IS SOMETHING TO CHECK DURING INSTALL. THAT DOES NOT STOP THE RUNNING OF THE MACHINE. IT IS NOW SITTING IN STORAGE - JUST WAITING FOR A NEW HOME.
29" WIDE
51" DEEP - BUT LEAVE ROOM IN THE BACK TO GET AROUND THE MACHINE FOR CLEANING AND REPAIR PLUS YOU HAVE TO RUN EXHAUST VENT TO THE OUTSIDE WORLD.
71" TALL
4" EXHAUST OUTLET - BUT YOU WILL WANT TO TRANSITION TO 5 OR 6" VENT TUBING DEPENDING ON YOUR INSTALLATION
NATURAL GAS
110 VOLT ELECTRICAL - 16 AMPS
ALLOW FOR A CRATED WEIGHT OF 1500 POUNDS. (60" X 42" X 78")
THIS IS A MANUAL WORK-HORSE

QUANTITY: 1

P-5077 PROBAT L25 ROASTER 25 KILOS

PROBAT 25 FOLLOWS YEARS OF TRADITION IN BUILDING REALLY TOUGH EASY TO REPAIR TYPE MACHINERY. THIS NEW MODEL IS EVEN MORE FRIENDLY AS IT HAS ELIMINATED ALL THE CHAINS AND BELTS OF YEARS GONE BY . . . AND HOW IS TOTALLY DIRECT DRIVE MOTORS - 4 OF THEM . . . ONE FOR EACH FUNCTION OF THE MACHINE. DON'T FORGET THAT THIS MACHINE IS TALL ENOUGH TO REQUIRE A LOADER AND THIS BASIC MODEL DOES NOT INCLUDE THE LOADER OR A DESTONER OR AN AFTERBURNER . . . AS ALL THESE ITEMS MUST BE ADDED TO THE BASIC MACHINE.

PROFILE EDITION: PLEASE NOTE THAT PROBAT IS OFFERING A PROFILE PACKAGE THAT CAN BE ADDED TO THIS MACHINE.
SPECIFICATIONS:
CAPACITY PER BATCH: 26–55 LBS (11.8–25 KG)
BATCHES PER HOUR: 4
CAPACITY PER HOUR: 220 LBS (100 KG)
NATURAL GAS OR PROPANE: 190,000 BTU / HR
INLET FITTING: ½ INCHES
VOLTAGE: 230 / 460 V
FREQUENCY: 60 HZ
PHASE: 3
MAX. LOAD: 40 / 20 AMPS
DIMENSIONS: 7 FEET 6 INCHES H X 3 FEET 6 INCHES W X 6 FEET D
WEIGHT: 2,500 LBS

QUANTITY: 1

P-5072 STA IMPIANTI ROASTER 15 KILOS

ROASTING MACHINES LINE PARTICULARLY SUITABLE FOR ARTISANAL SPECIALIZED ACTIVITIES IN MEDIUM BATCHES OF HIGH-QUALITY ROASTED COFFEE, SUCH AS ARTISAN MARKET OR COFFEE SHOPS. TECHNOLOGICALLY ADVANCED, CONFIRMS THEMELVES AS IDEAL TOOL FOR ROASTING COMPANIES SPECIALIZED IN SELECTED COFFEES OF HIGHER QUALITY. MADE WITH THE SAME REQUIREMENTS FOR RELIABILITY AND SECURITY FEATURES OF THE BIGGER AND MORE SOPHISTICATED INDUSTRIAL ROASTING MACHINES, ARE AVAILABLE WITH HEATING GENERATOR TYPE GAS OR DIESEL-FUEL BURNER AT MULTIPLE LEVELS OF FLAME AND MANUAL OR AUTOMATIC CONTROL SYSTEM.

TECHNICAL DATA:
ROASTER CAPACITY: 15 KG. | MAX. 19 KG./ CYCLE
ROASTING CYCLE: 9 MINUTES ÷ 20
RAW COFFEE PROCESSING PER HOUR: 60 KG. ÷ 90
INSTALLED ELECTRIC POWER: 1,8 KW | 380 VOLT THREEPHASE + NEUTRAL 50 HZ
THERMAL POWER: 24,000 KCAL/H/ 29 KW.
(NATURAL GAS OR LPG)

MAIN COMPONENTS:
HOPPER OF CHARGE IN STAINLESS STEEL
ROASTING DRUM
HEATING GENERATOR OF NEW GENERATION PATENTED AND COMPLETE OF BURNER
RAMP VALVES FOR GAS SAFETY AND ELECTRIC DEVICE TO CHECK FLAMES RATIFIED AND COMPLETE OF ALARM SIGNAL.
COOLING TANK IN STAINLESS STEEL WITH DOOR FOR CLEANING OPERATIONS
SAFETY PREVENTION SYSTEM ON THE COOLING TANK
SUPPORTING FRAME FOR THE OVER INDICATED COMPONENTS
ELECTRIC CONTROL BOARD TO CHECK AND CONTROL THE MACHINE ACCORDING CE RULES, COMPLETE OF PLC + TOUCH SCREEN FOR MACHINE MANAGEMENT AND TEMPERATURES SIGHT.
INDEPENDENT FANS FOR THE ROASTING DRUM AND THE COOLING TANK
INDEPENDENT MOTORS FOR THE ROASTING DRUM AND THE COOLING TANK
CYCLONE FOR CHAFFS COLLECTING

DETAILS OF COMPONENTS:
HOPPER OF CHARGE IN STAINLESS STEEL WITH MANUAL IN-LET OF COFFEE AND DOOR UNLOADING SYSTEM
ROASTING DRUM: MADE BY A FIXED ELEMENT WITH DOUBLE WALLS INSULATED FOR THERMAL PROTECTION AND SUPPORT OF THE ROTATING CYLINDER MOVING THE PRODUCT. SUCH CYLINDER, COMPLETELY MADE IN COMPOUND STEEL TO OVERCOME THE THERMAL CHANGES, IS DEVELOPED WITH A PERFORATED PLATE FOR THE CONTAINMENT AND SPECIAL BLENDERS ON THE RIGHT AND LEFT SIDE PLACED ON DIFFERENT LEVELS TO GET A PERFECT BLENDING OF COFFEE. AT THE END OF THE ROASTING CYCLE, A WIDE DOOR WITH MANUAL OPENING/CLOSING SYSTEM ALLOWS THE PRODUCT UNLOADING.
HEATING GAS GENERATOR OF NEW CONCEPT, PATENTED, COMPLETE OF BURNER, RAMP VALVES FOR GAS SAFETY AND ELECTRONIC EQUIPMENTS FOR FLAME CONTROL RATIFIED AND COMPLETE OF SIGNALLING ALARM (N°2 FLAME LEVELS)
COOLING TANK IN STAINLESS STEEL: WIDE SURFACE PERFORATED WITH 3 ARMS AND CROSSED FLOWS. UNLOADING MOUTH WITH HAND DRIVE.
SUPPORTING FRAME: MONO-BLOCK, PLATE PRESS-BENDED, STEEL MADE, SUPPORTING THE ELEMENTS PREVIOUSLY DESCRIBED.
SAFETY PROTECTION FOR COOLING TANK
ELECTRIC CONTROL BOARD FOR MACHINE MANAGEMENT ACCORDING CE RULES INTEGRATED.
COMPLETE OF PLC + TOUCH SCREEN FOR MACHINE MANAGEMENT AND TEMPERATURES VISUALIZATION.
POSSIBLE RECORDING OF ROASTING PARAMETERS.
CYCLONE FOR CHAFFS COLLECTING
INDEPENDENT MOTORIZATION FOR ROASTING DRUM AND COOLING TANK
INDEPENDENT ELECTRIC-FAN FOR ROASTING DRUM AND ELECTRIC FAN FOR COOLING TANK.

QUANTITY: 1

P-5044 STA IMPIANTI ROASTER 5 KILOS

STA
MODEL: IMPIANTI
ROASTER
5 KILOS
STA IS A MANUFACTURING GROUP IN ITALY - THAT IS MADE UP OF SEASONED ENGINEERS FROM MOST OF THE BIG OLD ITALIAN ROASTING MACHINE MAKERS - SO THEIR SCOPE OF KNOWLEDGE AND HISTORY IS FANTASTIC. BASICALLY - THEIR CLAIM TO FAME IS HOT AIR INTRODUCED INTO THE TOP OF THE ROASTING CHAMBER . . . BEING PULLED THROUGH THE TURBULATING COFFEE AND EXITING THROUGH DRUM PERFORATIONS INTO THE BOTTOM. FIRST, THAT MAKES IT REALLY FRIENDLY TO BLENDING FORMULAS AND SECOND IT MAKES FOR SMALLER CHAFF - AS THE TURNING COFFEE BEATS IT UP A LITTLE AND THUS THE ROAST COMES OUT MORE CLEAN THAN THE OLD DAYS OF SOME SOLID DRUMS . . . SO IT IS DIFFERENT - WHICH DOES NOT MAKE IT BETTER - BUT IF YOU HAVE A BACKGROUND ON JABEZ BURNS . . THEN YOU WILL REALLY LOVE THIS PRODUCTION. BIG NATURALLY DEVELOPED BEANS - VERY EVEN ROAST. FOLLOWING IS THE MANUFACTURERS SPECS AND WE WILL BE GLAD TO DISCUSS MORE IN-DEPTH AS YOU HAVE QUESTIONS.

ROASTING MACHINES LINE, PARTICULARLY SUITABLE FOR LITTLE PRODUCTION ACTIVITIES OF HIGH QUALITY ROASTED COFFEE, SUCH AS SHOPS, PASTRIES OR ARTISAN LABORATORIES. SMALL SIZE, TECHNOLOGICALLY ADVANCED, CONFIRM THEM ELVES AS IDEAL TOOL FOR THE PRODUCTION OF SELECTED COFFEES IN LITTLE QUANTITY. MADE WITH THE SAME REQUIREMENTS FOR RELIABILITY AND SECURITY FEATURES OF THE BIGGER AND MORE SOPHISTICATED INDUSTRIAL ROASTING MACHINES, ARE AVAILABLE WITH HEATING GENERATOR TYPE GAS BURNER (AVAILABLE ALSO BY ELECTRIC RESISTANCES) AND AUTOMATIC CONTROL SYSTEM WITH SEMIAUTOMATIC MANAGEMENT.

TECHNICAL DATA:
ROASTER CAPACITY: 5 KG. - MAX. 7 KG. CYCLE
ROASTING CYCLE: 9 MINUTES ÷ 20
RAW COFFEE PROCESSING PER HOUR: 20 KG. ÷ 30
INSTALLED ELECTRIC POWER: 0.9 KW | SINGLEPHASE 220 VOLTS 50 HZ
THERMAL POWER (NATURAL GAS OR LPG): 8000 KCAL/H
MAIN COMPONENTS:
HOPPER OF CHARGE IN STAINLESS STEEL
ROASTING DRUM
HEATING GENERATOR OF NEW GENERATION, PATENTED AND COMPLETE OF BURNER
RAMP VALVES FOR GAS SAFETY AND ELECTRIC DEVICE TO CHECK FLAMES RATIFIED AND COMPLETE OF ALARM SIGNAL
COOLING TANK IN STAINLESS STEEL
SAFETY PREVENTION SYSTEM ON THE COOLING TANK
SUPPORTING FRAME FOR THE OVER INDICATED COMPONENTS
ELECTRIC CONTROL BOARD MADE ACCORDING CE RULES, INTEGRATED, COMPLETE OF PLC + TOUCH SCREEN DEVICE FOR ROASTING MACHINE CONTROL AND MANAGEMENT.
INDEPENDENT FANS FOR THE ROASTING DRUM AND THE COOLING TANK
INDEPENDENT MOTORS FOR THE ROASTING DRUM AND THE COOLING TANK
CYCLONE FOR CHAFFS COLLECTING
DETAILS OF COMPONENTS:
HOPPER OF CHARGE IN STAINLESS STEEL WITH MANUAL IN-LET OF COFFEE WITH DOORUNLOADING SYSTEM.
ROASTING DRUM: MADE BY A FIXED ELEMENT WITH DOUBLE WALLS INSULATED FOR THERMAL PROTECTION AND SUPPORT OF THE ROTATING CYLINDER MOVING THE PRODUCT. SUCH CYLINDER, COMPLETELY MADE IN COMPOUND STEEL TO OVERCOME THE THERMAL CHANGES, IS DEVELOPED WITH A PERFORATED PLATE FOR THE CONTAINMENT AND SPECIAL BLENDERS ON THE RIGHT AND LEFT SIDE PLACED ON DIFFERENT LEVELS TO GET A PERFECT BLENDING OF COFFEE. AT THE END OF THE ROASTING CYCLE, THE PRODUCT UNLOADING IS ALLOWED BY A WIDE DOOR WITH MANUAL OPENING/CLOSING SYSTEM.
HEATING GAS GENERATOR OF NEW CONCEPT, PATENTED, COMPLETE OF BURNER, RAMP VALVES FOR GAS SAFETY AND ELECTRONIC EQUIPMENTS FOR FLAME CONTROL RATIFIED AND COMPLETE OF SIGNALLING ALARM.
COOLING TANK IN STAINLESS STEEL: WIDE SURFACE PERFORATED WITH TWO ARMS AND CROSSED FLOWS. UNLOADING MOUTH WITH HAND DRIVE.
SUPPORTING FRAME: MONO-BLOCK, PLATE PRESS-BENDED, STEEL MADE, SUPPORTING THE COMPONENTS PREVIOUSLY DESCRIBED.
SAFETY PROTECTION FOR COOLING TANK
ELECTRIC CONTROL BOARD FOR MACHINE MANAGEMENT ACCORDING CE RULES INTEGRATED. COMPLETE OF PLC + TOUCH SCREEN FOR ROASTING MACHINE CONTROL AND MANAGEMENT.
POSSIBLE RECORDING OF ROASTING PARAMETERS
CYCLONE FOR CHAFFS COLLECTING.
INDEPENDENT MOTORIZATION FOR ROASTING DRUM AND COOLING TANK
INDEPENDENT ELECTRIC-FAN FOR ROASTING DRUM AND ELECTRIC –FAN FOR COOLING TANK.

QUANTITY: 1

P-6605 PROBAT PRODUCTION ROASTER

HERE IS A CLASSIC PRODUCTION PROBAT ROASTER - BUILT TO RUN 24/7 . . . AND IT HAS BEEN SITTING FOR THE PAST 4 YEARS AS THEY GOT IN TROUBLE FOR NOT HAVING AN AFTERBURNER. NOW THEY ARE REPLACING THE MACHINE WITH A NEW MORE MODERN (AND A LOT MORE EXPENSIVE) SYSTEM. THIS MACHINE IS SCHEDULED TO BE PULLED AND WILL GO INTO STORAGE DURING JULY. EURO LOCATION AND EASY TO LOAD INTO CONTAINER AND ARRIVE AT YOUR NEW LOCATION. MOST ALL THE UTILITIES CAN BE CHANGED TO ACCOMODATE YOUR INDUSTRIAL GAS/PROPANE AND 3 PHASE ELECTRICAL.

GREAT INSTALLATION CONSISTING OF DUAL CYCLONES - ONE FOR ROASTING CHAFF COLLECTION AND THE OTHER FOR THE COOLER - ALL THE ROASTING AND COOLING FOR FINGER TOUCH PNUEMATIC CONTROL (ALL ORIGINAL) AS WELL AS COFFEE DE-STONINGL; EVEN THE CYCLONES ARE EQUIPPED WITH ROTARY VALVES AND SUCTION SYSTEM. VERY SOLID PROBAT INSTALLATION AND THAT MEANS IT IS SUPER TOUGH WITH TOP LINE PARTS.

THIS IS PERFECT MACHINE FOR COFFEE, COCOA AND EVEN MALT ROASTING.

QUANTITY: 1

R-3272 ROASTING PLANT - HAS GARANTI, GUMP 777E, JABEZ BURNS SAMPLER - 60 KILOS

60 KILOS HAS GARANTI WITH A REAL CARBON STEEL DRUM (THAT IS GOOD NEWS) THAT IS 15 YEARS OLD AND STOOD THE TEST OF TIME. CONSTANT PREVENTATIVE MAINTENANCE, SO IT IS SOLID.
UNIVERSAL BUCKET ELEVATOR LOADER
DESTONER
FLOOR SCALES
RACKS
JABEZ BURNS DUST COLLECTION SYSTEM FOR LOADER
OLD TIME BAR NUN SWIFTER GREEN COFFEE CLEANER - NOT BEING USED . . . THIS IS A WORKING ANTIQUE. MAKES A GOOD DISCUSSION PIECE.
JABES BURNS 4 BARREL SAMPLE ROASTER IN REALLY NICE TO EXCELLENT CONDITION - LIKE AN ANTIQUE THAT IS STILL WORKING AND WILL BE FOR AS LONG AS THE NEW OWNER IS LIVING.
E10 AGTRON COLOR READER
OLD TIMER WRIGHT MONOBAG TWIN PACKAGING MACHINE - LEFT SIDE SET FOR POUCHES AND R SIDE FOR 1 POUND BAGS. WRIGHT STILL SUPPORTS THIS MACHINE.
5 POUND BULK BAG - NET WEIGH SYSTEM - INCLUDING A FILLING LADDER
TRADITIONAL RO-TAP MACHINE AND SCREENS FOR TESTING GROUND COFFEE
THE IMPORTANT THING HERE IS SIMPLE OCS PRODUCTION LINE FOR LITTLE DOLLARS AND SOME RE-INSTALLATION TIME.
3 PHASE POWER.
NAPTURAL GAS

QUANTITY: 1

R-3261 OFFICINE VITTORIA ROASTER WORKING ANTIQUE - 20 KILOS

NICE RESTORED WORKING ANTIQUE FOR THE CIRCA 1950'S. THERE IS A LITTLE GAS BURNER ON THE END OF THE HEAT INLET TUBE - AS THAT IS A COMMON FIX AS ORIGINALLY THE HEAT CAME FROM AN INCINERATOR LOOKING COAL BURNER - SO THE STICKING OF A SMALL PACKAGE BURNER ON THE SAME INLET TUBE WORKS GREAT AS THE SUCTION EXHAUSTING THE AIR THROUGH THE ROASTING DRUM (PERFORATED) SIMPLY PULLS IN THE HEAT NEEDED AND EVERYBODY IS HAPPY. YOU WILL NEED TO SUPPORT THAT INLET ARM IN SOME MANOR.

ADDITIONAL CONCERN IS THERE IS NO SHOWN CHAFF COLLECTOR - AS I WILL HAVE TO VERIFY IF THERE IS ONE - OTHERWISE A SEPARATE CHAFF COLLECTOR WILL NEED TO BE ADDED. THIS IS ALL SET FOR EUROPEAN VOLTAGE - 3 PHASE.

KEEP IN MIND, THE BASE IS ALL CAST IRON - SO THIS OPERATES REALLY QUIETLY, AND THAT IS A GOOD THING. THE SHOWMANSHIP IS STRONG ON THIS MACHINE AS IT LOOKS REALLY GREAT ON A SHOWROOM OR COFFEEHOUSE FLOOR. AS IT IS MADE TO BE SEEN. THIS IS A PARTIAL PROJECT AS THE INSTALLATION WILL TAKE SOME DETAIL AND REMEMBER THAT THERE ARE NO OFFICIAL PARTS SUPPLY - BUT EVERYTHING ON THESE MACHINES IS QUITE EASY TO ACCESS AND HAVING A LOCAL MACHINE SHOP AT HAND IS PROBABLY GOING TO BE NEEDED IN THE FUTURE - AFTER ALL, IT IS A 1950'S VINTAGE.

ALLOW FOR A FLOOR SPACE OF 4' X 7' TO ACCOMMODATE THE ROASTER AND CHAFF COLLECTOR. (1.22M X 2.12M)

THERE WILL BE SOME COST TO CRATE - TO BE ADVISED AS SOON AS YOU KNOW THIS IS THE RIGHT MACHINE FOR YOUR OPERATION.

IN PERFECT WORKING CONDITION

QUANTITY: 1

R-3244 JABEZ BURNS ELECTRIC USED 2 BARREL SAMPLE ROASTER

27" TALL X 15" WIDE X 30" DEEP
6 TO 20 OUNCES OF GREEN PER CYLINDER
122 POUNDS IN WEIGHT PLUS CRATING
ALLOW FOR 200 POUNDS SHIPPING
4" EXHAUST PIPE TO THE OUTSIDE WORLD
220 ELECTRIC SINGLE PHASE
RUNS REALLY GREAT
THIS IS A ONE-OWNER MACHINE - AND IS NO LONGER IN USE DUE TO MOVING TO A NEW BUILDING AND SWITCHING TO A ONE BARREL UNIT - AS THEIR NEED WAS NOT SO GREAT
THIS IS SITTING IN STORAGE.
NOW, THIS IS HISTORY - AS THIS IS THE LAST MACHINE MADE BY JABEZ BURNS AND HAS LOTS OF SENTIMENTAL VALUE DUE TO THAT. PARTS ARE OFF THE SHELF AND EVEN THE HEATING ELEMENTS ARE STANDARD STOVETOP ELEMENTS AVAILABLE AT ANY APPLIANCE PARTS STORE. THE ONLY DOWNSIDE TO THIS ROASTER IS A LONGER HEAT-UP TIME OR WARM-UP THAN A GAS VERSION, BUT THE SMOOTH ROAST IS WHAT MATTERS. THE CHAFF COLLECTION DRAWER IS LOCATED UNDER THE MACHINE AND FRONT REMOVABLE.
SHIPS FROM MIDWEST AS IT IS IN A STORAGE UNIT.

QUANTITY: 1

R-3266 SIROCCO SR 35 ROASTER - 35 KILOS

SEVEN “MACHINES” IN ONE BODY. THAT SAVES YOU PRECIOUS SPACE, EXPENSIVE ENERGY, REDUCES WASTE AND TOTALLY QUIET. WHEN COMPARING, REMEMBER THAT YOU WILL NEVER NEED TO BUY OXIDIZER, AND A AFTERBURNER, SINCE IT IS ALL INCLUDED.
AFTERBURNER
INCINERATOR
CHAFF COLLECTOR
MANUALLY & PROGRAMMED PROFILE CONTROLLER
VARIABLE AIR SPEED CONTROLLER
SEPARATE HEAT CONTROLLER
GAS MODULATING CONTROLLER

COMPLETE ROASTING PROCESS WITH ALL FEATURES BUILT INSIDE ONE MACHINE
GENTLE CAST IRON ROASTING ENVIRONMENT
MECHANICALLY FLUIDIZED BEAN MOVEMENT
INTEGRATED AFTERBURNER AND INCINERATOR
TO ELIMINATE SMOKE, ODOR AND CHAFF
GRAPHICAL TOUCH SCREEN WITH PROFILE MEMORY
OVERSIZED INSPECTION PORTS
STIRFLEX COOLING TRAY
QUICK-RELEASE COOLER WITH REMOVABLE SCREEN
MAINTENANCE FREE SEALED ROASTING DRUM
BUILT-IN STONER BOOT
LOW PROFILE INFEED HOPPER
WEB-ENABLED FOR FACTORY ASSISTANCE AND DIAGNOSTICS
AUTOMATIC OR SEMI-AUTOMATIC OPERATION FOR CONSISTENT BATCHES
CLEAR PROCESS INFORMATION INCLUDES BEAN TEMP., ELAPSED TIME,
TEMPERATURE CHANGE AND STATUS

SPECIFICATIONS:
MODEL #: SR 35
BATCH CAPACITY: 35 KGS
DIMENSIONS: 35" W X 112" L X 84" H
COOLER DIAMETER: 40
HEAT SPECIFICATIONS: GAS & 380K-760K
WEIGHT: 3600 LBS

QUANTITY: 1