Search results for: 'a-2)','.)).)('

R-3274 GP90 PROBAT ROASTER - 90 KILOS

THIS MACHINE WAS THE SMALLEST MACHINE IN A LARGE PROBAT PLANT AND NOT USED EVEN DAILY - THEN THAT PLANT MOVED INTO A BIG NEW BUILDING AND THEY NEVER RE-INSTALLED THE MACHINE - SO IT SAT FOR THE LAST 10 YEARS THINKING "SOMEDAY" WE WOULD PUT IT BACK INTO USE . . . BUT THAT DAY NEVER HAPPENED . . . SO GET RID OF IT.

WE KNEW THE ORIGINAL SALE AND INSTALLATION BACK IN THE EARLY 70'S AND HAVE MONITORED THIS EQUIPMENT (IN AND OUT OF SERVICE) FOR ALL THIS TIME AND NOW WE ARE PLEASED THAT IT CAN GO OUT AND GET INTO ACTUAL USE. THIS MACHINE IS IN TOP CONDITION - AND ALL THAT IS NEEDED IS TO VERIFY THE GREASE IN THE BEARINGS AND START ROASTING AGAIN.

SET FOR PROPANE GAS - BUT CAN BE CONVERTED TO NATURAL GAS AS NEEDED.
240 V 3 PHASE POWER IN 60HZ

ALL SET FOR EASY US OR NORTH AMERICAN INSTALLATION. CAN SHIP IMMEDIATELY. PROBAT AND INDEPENDENT PARTS ARE ALL AVAILABLE AS OR IF NEEDED. THIS IS A HEALTHY MACHINE.

QUANTITY: 1

R-3268 HAS GARANTI ROASTER - 60 KILOS

BUILT 2013 & NEVER USED
DIMENSIONS: 91" H X 69" W X 104" D/ 2300 H X 1750 W X 2650 D mm
2,535 LBS. / 1,150 KG.
220 VAC
NATURAL GAS
INCLUDES LOADER AND DESTONER

THIS MACHINE IS LISTED HERE UNDER SOME DEGREE OF FRUSTRATION - AS THE SELLER BOUGHT THE MACHINE FOR A PROJECT (WITH CONSULTANT'S ADVISE) AND THE PROJECT TOTALLY GOT CHANGED AROUND AND THE ROASTER WAS SIMPLY NEVER NEED, NEVER INSTALLED, NEVER USED. AND TO MAKE MATTERS WORSE, THEIR BUILDING HAS NO NATURAL GAS ANYWHERE CLOSE. SO, HERE IS A TOTALLY NEW MACHINE - AS MAYBE 20 TO 30% LESS THAN BUYING IT BRAND NEW. AND IT IS SITTING RIGHT HERE IN THE US IN SOUTHERN CALIFORNIA. INCLUDES LOADER AND STONER.
BOTTOM LINE. THIS IS A SERIOUS MACHINE, REALLY EASY TO WORK ON, REALLY EASY TO RUN AND AVAILABLE IMMEDIATELY.

QUANTITY: 1

R-3266 SIROCCO SR 35 ROASTER - 35 KILOS

SEVEN “MACHINES” IN ONE BODY. THAT SAVES YOU PRECIOUS SPACE, EXPENSIVE ENERGY, REDUCES WASTE AND TOTALLY QUIET. WHEN COMPARING, REMEMBER THAT YOU WILL NEVER NEED TO BUY OXIDIZER, AND A AFTERBURNER, SINCE IT IS ALL INCLUDED.
AFTERBURNER
INCINERATOR
CHAFF COLLECTOR
MANUALLY & PROGRAMMED PROFILE CONTROLLER
VARIABLE AIR SPEED CONTROLLER
SEPARATE HEAT CONTROLLER
GAS MODULATING CONTROLLER

COMPLETE ROASTING PROCESS WITH ALL FEATURES BUILT INSIDE ONE MACHINE
GENTLE CAST IRON ROASTING ENVIRONMENT
MECHANICALLY FLUIDIZED BEAN MOVEMENT
INTEGRATED AFTERBURNER AND INCINERATOR
TO ELIMINATE SMOKE, ODOR AND CHAFF
GRAPHICAL TOUCH SCREEN WITH PROFILE MEMORY
OVERSIZED INSPECTION PORTS
STIRFLEX COOLING TRAY
QUICK-RELEASE COOLER WITH REMOVABLE SCREEN
MAINTENANCE FREE SEALED ROASTING DRUM
BUILT-IN STONER BOOT
LOW PROFILE INFEED HOPPER
WEB-ENABLED FOR FACTORY ASSISTANCE AND DIAGNOSTICS
AUTOMATIC OR SEMI-AUTOMATIC OPERATION FOR CONSISTENT BATCHES
CLEAR PROCESS INFORMATION INCLUDES BEAN TEMP., ELAPSED TIME,
TEMPERATURE CHANGE AND STATUS

SPECIFICATIONS:
MODEL #: SR 35
BATCH CAPACITY: 35 KGS
DIMENSIONS: 35" W X 112" L X 84" H
COOLER DIAMETER: 40
HEAT SPECIFICATIONS: GAS & 380K-760K
WEIGHT: 3600 LBS

QUANTITY: 1

R-3264 OFFICINE VITTORIA ROASTER - 30 KILOS

THIS 30 KILOS OFFICINE VITTORIA (BUILT IN 1970) NOW REBUILT. IS AN ENTIRE PACKAGE - ROASTER, COLLECTOR, AFTERBURNER AND SILOS FOR ROASTER OR EVEN FOR GREEN, BUT NORMALLY FOR THE ROASTED COFFEE STORAGE. "PERFECT FOR A "SHOW AND TELL" WHOLESALE RETAIL OPERATION. THE ROASTER IS SO BEAUTIFUL AND FUN TO WATCH THAT IT WOULD BE A SHAME TO HIDE IT FROM PUBLIC VIEW. FOOD FOR THOUGHT. NEW REPLACEMENT BURNERS RECENTLY INSTALLED.

WHAT IS HAPPENING HERE, IS THAT THIS CLASSIC "RETRO" STYLE CAST IRON ROASTER SITTING ON IT'S OWN PEDESTAL IN OLD WORLD CHARM. IT HAS BEEN MECHANICALLY RESTORED TO IT'S ORIGINAL. THIS UNIT IS IN STORAGE IN THE SOUTHEAST US AND HAS NOT BEEN RUNNING HERE - AS THE PLANS DID CHANGE AND THE ROASTER SYSTEM IS NO LONGER NEEDED.

THE SILO ACTS AS A DESTONER AT THE SAME TIME - SO YOU HAVE THE BEST OF BOTH WORLDS HERE.

THE PERFORATED DRUM ALLOWS FOR HIGHER THAN NORMAL AIR FLOW AND THE BEANS REALLY LIKE THAT - AS THEY EXPAND GREATLY AND HAVE A REALLY CLEAN TASTE - THIS MACHINE IS VERY ITALIAN WHERE TASTE OF THE COFFEE WAS REALLY SUPREME - SO THE TECHNOLOGY IS VERY GOOD. THERE ARE STILL TECHNICIANS FROM THE OLD OV FACTORY THAT WORK OTHER PLACES IN THE COFFEE INDUSTRY IN THE BOLOGNA AREA - SO YOU HAVE CONSTANT HELP WITH MECHANICAL OR ELECTRICAL ISSUES.

VOLTAGE: 220V/ 60 HZ. / 3 PHASE

QUANTITY: 1

R-3263 DIEDRICH IR-24U ROASTER & EQUIPMENT - 24 KILOS, YEAR 2008

VERY UNUSUAL THAT WE GET SUCH A COMPLETE ROASTING LINE AND HAVE ALL OF IT BE FROM THE SAME DIEDRICH MANUFACTURER. ALL COORDINATED ACCORDING TO COLOR AND IMAGE. NOTICE THAT THERE IS A COFFEE BAG ATTACHED TO THE OUTLET AIR OF THE DE-STONER - BUT THAT CAN BE VENTED TO THE OUTSIDE WORLD AS WELL - JUST A LONG AS YOU ARE NOT BLOWING COFFEE DUST ALL OVER THE PLANT. IN THE FACE OF THE ROASTER - SOME OF THE ORIGINAL PAINT HAS PEELED BACK DUE TO HEAT - AND THE GOOD NEWS IS THAT MOST ANY AUTO PARTS STORE HAS HIGH TEMP PAINT FOR MOTORCYCLE EXHAUST AND ENGINE BLOCKS - SO TOUCH UP FOR THAT AREA IS SIMPLE.

MECHANICALLY - THIS MACHINE HAS BEEN ALL MAINTAINED BY THE SAME PERSON SINCE IT WAS NEW 6.5 YEARS AGO - SO THAT IS REALLY GOOD. THE LAST USE WAS JUNE OF 2015 (REPLACED BY LARGER MACHINE) AND HAS BEEN SITTING EVER SINCE AND NOW IS IN THE WAY OF GREEN STORAGE SO ANXIOUS TO GET IT OUT OF THE WAY. FULL CRATING WILL BE NEEDED AND I THINK THAT IT WOULD ALL FIT INTO A 20 FOOT CONTAINER. A MODEST FEE FOR CRATING, BLOCKING AND CONTAINER LOADING WILL BE NEEDED.

ELECTRICAL ON THIS EQUIPMENT IS 230 VOLT 50/60HZ AS THE MOTORS ARE ALL DUAL VOLTAGE.
NATURAL GAS

QUANTITY: 1

R-3261 OFFICINE VITTORIA ROASTER WORKING ANTIQUE - 20 KILOS

NICE RESTORED WORKING ANTIQUE FOR THE CIRCA 1950'S. THERE IS A LITTLE GAS BURNER ON THE END OF THE HEAT INLET TUBE - AS THAT IS A COMMON FIX AS ORIGINALLY THE HEAT CAME FROM AN INCINERATOR LOOKING COAL BURNER - SO THE STICKING OF A SMALL PACKAGE BURNER ON THE SAME INLET TUBE WORKS GREAT AS THE SUCTION EXHAUSTING THE AIR THROUGH THE ROASTING DRUM (PERFORATED) SIMPLY PULLS IN THE HEAT NEEDED AND EVERYBODY IS HAPPY. YOU WILL NEED TO SUPPORT THAT INLET ARM IN SOME MANOR.

ADDITIONAL CONCERN IS THERE IS NO SHOWN CHAFF COLLECTOR - AS I WILL HAVE TO VERIFY IF THERE IS ONE - OTHERWISE A SEPARATE CHAFF COLLECTOR WILL NEED TO BE ADDED. THIS IS ALL SET FOR EUROPEAN VOLTAGE - 3 PHASE.

KEEP IN MIND, THE BASE IS ALL CAST IRON - SO THIS OPERATES REALLY QUIETLY, AND THAT IS A GOOD THING. THE SHOWMANSHIP IS STRONG ON THIS MACHINE AS IT LOOKS REALLY GREAT ON A SHOWROOM OR COFFEEHOUSE FLOOR. AS IT IS MADE TO BE SEEN. THIS IS A PARTIAL PROJECT AS THE INSTALLATION WILL TAKE SOME DETAIL AND REMEMBER THAT THERE ARE NO OFFICIAL PARTS SUPPLY - BUT EVERYTHING ON THESE MACHINES IS QUITE EASY TO ACCESS AND HAVING A LOCAL MACHINE SHOP AT HAND IS PROBABLY GOING TO BE NEEDED IN THE FUTURE - AFTER ALL, IT IS A 1950'S VINTAGE.

ALLOW FOR A FLOOR SPACE OF 4' X 7' TO ACCOMMODATE THE ROASTER AND CHAFF COLLECTOR. (1.22M X 2.12M)

THERE WILL BE SOME COST TO CRATE - TO BE ADVISED AS SOON AS YOU KNOW THIS IS THE RIGHT MACHINE FOR YOUR OPERATION.

IN PERFECT WORKING CONDITION

QUANTITY: 1

R-3258 JOPER ROASTER - 15 KILOS

BATCH CAPACITY: 15 KG (33 LBS)
CONTROL DESIGN: MANUAL/ELAPSED TIME
TEMP READINGS: INLET AIR & BEAN TEMP
AIR CONTROL: ADJUSTABLE
CAPACITY PER HOUR: 60 KG (132 LBS)
ROASTING TIME: 15 MIN AVERAGE
COOLING TIME: 3 MIN
BURNING POWER: 140,000 BTU/H (LOW-NOX) 15 KILO
OPERATION TYPE BURNER: MICRO-FINE ADJ WITH LIMIT SET
GAS FLOW READER: YES
FUEL TYPE (GAS OVEN): NATURAL GAS
POWER REQUIREMENTS: 20 AMPS SINGLE & 10 AMPS 3 PHASE
VOLTAGE/FREQUENCY/PHASES: 220/50-60/TRIP-SINGLE
EXHAUST DIAMETER: 140mm (5.5 IN)
REMOTE CHAFF CYCLONE: POSITION ADJUSTABLE
WEIGHT: 737 KG (1,620 LBS)
HEIGHT: 7'3"
WIDTH: 3" CONTROLS
DEPTH: 8' W/ ADJUSTABLE REMOTE
NO. OF MOTORS: 4
ROASTER FAN (NORMAL WORK CONDITIONS RUNNING AT 60HZ. DAMPER 70 %): 4
COOLER FAN (RUNNING AT 60HZ): 1283 M3/H/755 CFM

QUANTITY: 1

R-3249 GIESEN COFFEE ROASTER W15A SELKIRK OXIDIZER - 15 KILOS

AN EXCEPTIONAL OPPORTUNITY FOR READY TO BE DELIVERED/INSTALLED EQUIPMENT CREATED BY A CHANGED BUSINESS MODEL.
NATURAL GAS
240V/60 HZ
BLACK/SILVER

SELKIRK SPECIALIZES IN THERMAL AFTERBURNERS FOR COFFEE ROASTING MACHINES FROM 10 TO 120 KGS PER BATCH. AFTERBURNERS ARE DESIGNED OF QUALITY MATERIALS FOR LONG SERVICE LIFE. INTEGRATED EFFICIENT GAS BURNERS WHICH REDUCE OPERATING COSTS. BURNER CONFORMS TO UL 295 STANDARD FOR COMMERCIAL/INDUSTRIAL GAS BURNERS. AFTERBURNER DESIGN PROVIDES LONG RETENTION TIMES TO ELIMINATE SMOKE AND ODORS FROM THE ROASTING PROCESS. STANDARD AFTERBURNER OPERATING TEMPERATURE IS 1250 F, BUT CAN EASILY BE ADJUSTED TO MEET LOCAL AIR QUALITY REQUIREMENTS. GAS BURNER IS COMPLETELY SELF MODULATING, AND OPERATOR CONTROLS ARE DESIGNED FOR EASE OF USE.

OXIDIZER SPECIFICATIONS:
TO-2CS321 THERMAL OXIDIZER WITH THE FOLLOWING DESIGN FEATURES:
WAYNE COMBUSTION LC 1500 BURNER WITH 1.5 MILLION BTU PER HOUR MAXIMUM INPUT.
DUNGS MULTIBLOC SAFETY VALVE MBC VEF 2500.
DUNGS LOW AND HIGH GAS PRESSURE SWITCHES.
SIEMENS LME SERIES FLAME SAFETY CONTROLLER.
FLAME SENSING ROD FOR FLAME VERIFICATION.
FULLY MODULATING TO MODULATE AT PRE-SET OPERATING TEMPERATURE;
BURNER AND CONTROLS CONFORM TO UL 295 STANDARD FOR COMMERCIAL INDUSTRIAL GAS HEATING EQUIPMENT.
OPERATOR FRIENDLY CONTROL SYSTEM.
TO-2CS321 DIMENSIONS:
OUTSIDE DIAMETER: 36"
OVERALL HEIGHT FROM FLOOR: 82"
INLET DIAMETER: 6"
OUTLET DIAMETER: 10"
EXTERIOR TO BE POWDERCOATED CARBON STEEL MATTE BLACK (OPTIONAL COLORS AVAILABLE).
4" OF HIGH DENSITY CERAMIC INSULATION BETWEEN INTERIOR AND EXTERIOR SURFACES.

QUANTITY: 1

R-3247 DIEDRICH IR-12 ROASTER WITH AFTERBURNER - 12 KILOS

HERE IS A ROASTER/AFTERBURNER/PROFILER PACKAGE THAT CONSIST OF A 2006 MACHINE - THAT WAS SENT IN TO THE DIEDRICH FACTORY FOR A COMPLETE REBUILD, UPDATE TO "SAME AS" NEW CONDITION. PLUS THE BIGGEST PROFILER AVAILABLE WAS ADDED AND A NEW AFTERBURNER WITH OVERSIZED MODULATING BURNER. ALL OF THIS IN 2013. SO THIS IS A TOTALLY UNUSUAL PACKAGE.

THE AFTERBURNER TAKES UP 42" SQUARE ON THE BASE WITH A ROUND TOP OF 36" DIAMETER. AND 85" TALL THERE IS SOME FLEXIBILITY ON PLACING THE ROASTER AND AFTERBURNER AS THE 2 ARE CONNECTED WITH PIPING THAT WOULD BE LOCALLY SUPPLIED IF DIFFERENT THAN THE ONE THAT COME WITH THE MACHINE.
IR 12 DIEDRICH COFFEE ROASTER
FULLY REBUILT AND UPGRADED BY DEIDRICH MANUFACTURING IN 2013
FULLY AUTOMATED WITH LASTEST PC BASED TECHNOLOGY
STATE OF THE ART AFTERBURNER BUILT IN 2013
DIMENSIONS: WIDTH 30" X DEPTH 55" X HEIGHT 77"
1000 POUNDS PLUS CRATING ON THE ROASTER
1500 POUNDS FOR THE AFTERBURNER
120 VOLT ELECTRICAL
BLACK AND BRASS IN COLOR.

QUANTITY: 1

R-3245 PROBAT DUETT ROASTER & DEMO UNIT - 1 KILO

PROBAT DUETT RESEARCH & DEMO UNIT: 1 KILO
THIS ROASTER IS NOT FOR EVERYBODY AS IT IS TOTALLY SPECIALIZED AND DESIGNED AS A "SAMPLE ROASTER" TO REALLY BIG AND HIGH YIELD ROASTERS ALSO MADE BY PROBAT OR GOTHOT BACK IN THE DAY. TOTALLY GEEK TYPE. ACTUALLY THIS MACHINE WAS ONLY USED IN THE PROBAT SHOWROOM WHEN IT WAS LOCATED IN BURLINGAME CALIFORNIA AND HAS NOT BE USED SINCE. EVEN THEN, IT WAS USED ONLY SEVERAL TIMES A QUARTER PR DURING A CLASS. WE ALWAYS PUT IN A LITTLE OVER 2 POUNDS SO AS TO GET 2 POUNDS OUT. BUT THERE IS A FLEXIBLE RANGE.

YOU PUT IN FROM 1.6 POUNDS TO 2.6 POUNDS AND CAN SET UP A PROFILE (OR RUN MANUALLY) SO THAT YOU CAN CONTROL AIR AND HEAT AND THE SPEED OF BOTH ALLOWING FOR AS FAST AS A 2 MINUTE ROAST FOR HIGH YIELD OR ADJUST TO NORMAL RANGES FOR MAKING INTRICATE STUDIES INTO CHANGING CONDITIONS OF PROFILING. EVERY DETAIL OF THE MACHINES INNARDS OR ELECTRICAL BOX IS ALL RELAY DRIVEN AND CONTROLLED. THE TOTAL ROAST PROCESS IS VISIBLE BEFORE YOUR EYES AND AS SOON AS THE ROAST REACHES YOUR SET POINT - THE COFFEE SIMPLY SLIDES AND DROPS INTO THE COOING CHAMBER AND YOU ARE READY FOR THE NEXT STUDY.

REQUIRES AN AIR CONNECTION. RUNS ON ELECTRIC ONLY. HAS LIGHTS ON INSIDE. COMES IN 2 BIG BOXES AND WE HAD IT INSTALLED WITH THE ROASTER ONLY IN THE LAB SHOWROOM AND THE CHAFF AND AIR HANDLING UNIT IN ANOTHER ROOM SO WE DID NOT HAVE TO LISTEN TO IT. YOUR OPTION.

BUILT IN 1995 AT PROBAT. NEEDS 3 PHASE POWER. BEEN IN STORAGE SINCE THOSE SHOWROOM DAYS BACK IN IN 97.

QUANTITY: 1