Search results for: 'cond'

R-3259 PRIMO 35 ROASTER TOP CONDITION 2009 - 15 KILOS

35 # PER BATCH
35 LBS. CAPACITY, CARBON STEEL DRUM, INFRARED CERAMIC BURNERS.
ROAST AND COOL AT THE SAME TIME - AS EACH FUNCTION HAS INDEPENDENT FANS, MOTORS AND CONTROL.
EXTRA SET OF BURNERS INCLUDED AS SPARES FOR FUTURE USE WHEN NEEDED
PROPANE HEAT - 96,000 BTU
220 VOLT 60HZ SINGLE PHASE ELECTRICAL
WIRED FOR CROPSTER OR ARTISEN PROFILE TRACKING
REMOTE CHAFF COLLECTOR
MAIN ROASTER BODY - 30" X 66" X 73" TALL - PLUS ROOM FOR PIPES AND MOTOR SERVICE IN THE BACK.
ALLOW ANOTHER 36" SQUARE AREA FOR CHAFF COLLECTION - AND KEEP IN MIND THAT THE LOCATION IS VERY USABE TO FIT YOUR FACILITY.

THIS PRIMO 35 IS A GOOD LOOKING ROASTER - AND IT HAS BEEN USED SPARINGLY SINCE 2009 AS THIS IS A "SMALL BATCH" USE BY A MUCH LARGER INSTITUTIONAL-TYPE OPERATION - BUT HIS WHOLE BEAN BUSINESS HAS GROWN AND IT IS NOT COST EFFECTIVE TO HAVE A DEDICATED ROASTMASTER JUST DOING 15 KILO PER BATCH. SO A LARGE MACHINE IS BEING INSTALLED. GOOD NEWS FOR THE BUYER.

ANYBODY LIKING DIEDRICH ROASTERS WILL BE HAPPY WITH THIS AS THEY ARE INTERNALLY SIMILAR AS THE OWNER OF PRIMO USED TO BE SHOP FOREMAN BACK WHEN DIEDRICH WAS LOCATED IN CALIFORNIA. ANOTHER THING THAT IS NICE ABOUT THIS MACHINE IS THE EASE OF WORKING ON IT IF AND WHEN IT REQUIRES ATTENTION. MOST EVERY PART IN THE MACHINE IS "OFF THE SHELF" AND THAT MAKES REPAIRS AND MAINTENANCE REAL EASY. MAKE SURE YOU LUBE ON SCHEDULE AND MAKE SURE YOU USE HIGH TEMP GREASE (LINK) AS EXAMPLE, ALTHOUGH THERE ARE OTHER SELECTIONS IN THAT SAME AREA OF THE WEB STORE.

LOTS OF PEOPLE USE THIS MACHINE AS A "STARTER MACHINE" SINCE IT IS SO EASY TO OPERATE. EVEN IF YOU DO NOT USE FANCY PROFILE TRACKING - IT IS STILL GREAT FOR MANUAL ROASTING AND HANDS-ON DEVELOPMENT.

QUANTITY: 1

Learn More

TT-2909 PROBAT 23R ACO ROASTING PLANT, 240 KILO, YEAR REFURBISHED 2018 PROBAT-BURNS ACCLAIMED 23R ACO COFFEE ROASTING PLANT 4-BAG COFFEE ROASTING PLANT PROBAT-BURNS MODEL 23R “ACO” (AUTOMATIC CLEAN OUT) CAPACITY IS REPORTED TO BE 200 TO 540 LBS. (90 TO 240 KG) @ 4-5 BATCHES PER HOUR (NOMINAL). THAT'S UP TO 2,500 LBS. (1,134 KG) PER HOUR THIS MACHINE HAS ONLY RAN 3 HOURS P/DAY FOR LESS THAN 3 YEARS SINCE PUT ONLINE AFTER COMPLETE REFURBISH IN 2018. THIS EQUIPMENT SET IS CURRENTLY DECOMMISSIONED AND DISASSEMBLED SITTING ON PALLETS, READY FOR FREIGHT PREP AND SHIPPING. COMPLETELY REFURBISHED IN 2018, IT HAS BEEN OFFLINE FOR ABOUT 9 MONTHS. IT'S IN EXCELLENT CONDITION, RUNS PERFECTLY. FUELED BY NATURAL GAS, POWERED BY 480 VOLT. THIS 23R ACO HAS MANUAL ROAST CONTROLS. CAN BE UPGRADED TO FULLY AUTOMATED Learn More

REFERENCE NUMBER: R-9600

PROBAT GG120 BATCH ROASTER

 

BATCH ROASTER

MAKE: PROBAT

MODEL: GG120

OUTPUT CAPACITY: 500 KG PER HOUR

 

MACHINE IN FULLY REBUILT CONDITION, WARRANTY 6 MONTHS

 

QUANTITY: 1

Learn More

R-7084 INDUSTRIAL COFFEE GRINDER 1000N

SIZE: 950X550X1710 (mm)
WEIGHT: 150KG
HORSEPOWER: 2HP
FUNNEL CAPACITY: 11KG
BLADES SIZE: FLAT Ø 180mm
BLADES SPEED: 575 R.P.M
GRINDING CAPACITY: 150KG/HR
PACKING SIZE: 550X950X1380 (mm)
PACKING WEIGHT: 180KG
SUPER HORSEPOWER PRECISION ADJUSTING DEVICE, CAN DO EXTRA FINE ADJUSTMENT SUITABLE FOR LONG PERIOD OF USE. GRINDING CAN BE CONDUCTED CAREFULLY SPECIFICATIONS

QUANTITY: 1

Learn More

R-7083 INDUSTRIAL COFFEE GRINDER 700N

SIZE: 770X740X1330 (mm)
WEIGHT: 120KG
HORSEPOWER: 2HP
FUNNEL CAPACITY: 5.3KG
BLADES SPEED: 1200R.P.M
GRINDING CAPACITY: 90KG/HR
PACKING SIZE: 600X380X1040 (mm)
PACKING WEIGHT: 150KG
SUPER HORSEPOWER PRECISION ADJUSTING DEVICE, CAN DO EXTRA FINE ADJUSTMENT SUITABLE FOR LONG PERIOD OF USE. GRINDING CAN BE CONDUCTED CAREFULLY SPECIFICATIONS

QUANTITY: 1

Learn More

R-6856 FUTURA K AUTOMATIC ROASTING MACHINES

AUTOMATIC ROASTING MACHINES RESULT OF LONG STUDIES AND LIVED EXPERIENCE.
THE ROASTING MACHINES SERIES FUTURA K ARE THE RESULT OF LONG STUDIES AND LIVED EXPERIENCE ALONGSIDE OUR CLIENTS COFFEE ROASTERS, FOR THE REALIZATION OF THE MOST ADVANCED MACHINERIES IN THE FIELD OF INDUSTRIAL COFFEE ROASTING.
THE COMPACT DIMENSIONS, RELIABILITY OF THE MATERIALS AND COMPONENTS, THERMAL MANAGEMENT WITH IMMEDIATE RESPONSE, CALIBRATED AND PARTICULARLY FUEL EFFICIENT, HIGH THERMAL AND ACOUSTIC INSULATION AND OTHER POSITIVE FEATURES, MAKE THESE MACHINES REFERENCEGUIDE IN PROFESSIONAL ROASTING FIELD.

MAIN COMPONENTS:
FEEDING HOPPER INSULATED WITH PNEUMATIC FILLER DEVICE, MOVABLE INLET, ELECTROPNEUMATIC UNLOADING CONTROL.
ROASTING DRUM MADE BY A FIXED HOUSING WITH DOUBLE INSULATING WALLS FOR THERMAL PROTECTION AND SUPPORTING THE ROTARY CYCLINDER THAT MOVES THE PRODUCT. THE WHOLE CYCLINDER IS MADE OF COMPOUND STEEL TO WITHSTAND THERMAL SHOCKS, ABSOLUTELY ODOURLESS, WITH PERFORATED SHEET FOR PRODUCT CONTAINEMENT, RIGHT AND LEFT BLENDERS SETTLED AT DIFFERENT LEVELS TO OBTAIN PERFECT MIXTURE.
WHEN THE ROASTING PROCESS IS FINISHED, THE COFFEE IS UNLOADED THROUGH A LARGE DOOR WITH ELECTROPNEUMATIC CONTROL OF OPENING AND CLOSING.
THE HEATING GENERATOR IS SPECIFICALLY DESIGNED FOR ROASTING LINE APPLICATIONS. THE PRINCIPLE OF HEATING IS BASED ON HOT AIR FLOWS BY CONVECTION. GAS OR GASOIL BURNER TYPE MODULATING OR MULTI LEVEL- FLAMES ACCORDING THE APPLICATION.
COOLING TANK WITH LARGE STAINLESS STEEL SURFACE, SELF CLEANING, WHERE THE PRODUCT IS MOVED BY MEANS OF 4 CROSSED ARMS. TWO DISCHARGES: ONE IS ELECTROPNEUMATICALLY DRIVEN AND THE OTHER IS MANUAL FOR EMERGENCY. DOOR OF INSPECTION AND EASY CLEANING OF THE LOWER SIDE.
PELLICLES SEPARATOR WITH EXTRACTION, BY WORM CONVEYOR OR INCINERATOR FOR CONSTANT EFFICIENCY OF THE AIR CHAFFS SEPARATION SYSTEM.
SUPPORTING FRAME IN TUBULAR PROFILES, STEEL MADE, TO CONTAIN AND SUPPORT THE OPERATING DEVICES, SO TO OBTAIN A COMPACT MACHINE-LIMITED ENCUMBRANCE, COMPLETE WITH PANELS FOR HEATING AND NOISE CONTAINMENT.
INDEPENDENT ELECTRIC CONTROL BOARD WITH PLC + TOUCH SCREEN AND ALL DEVICES FOR MACHINE CONTROL AND
MANAGEMENT, CAREFULLY WIRED AND EQUIPPED WITH ALL SIGNALS USEFULL FOR ROASTING PROCESS.

STANDARD EQUIPMENT:
AUTOMATIC ROASTING SYSTEM MANAGED BY PLC + TOUCH SCREEN WITH RECORDING FOR ROASTING CURVES – PROFILES.
VISUALIZATION BY MONITOR OF TEMPERATURES AND ROASTING FUNTIONS.
FIRE PREVENTION EQUIPMENT ON THE ROASTING DRUM AND COOLING TANK; ON THE CYCLONE-CHAFFS SEPARATOR IF EQUIPPED WITH WORM CONVEYOR FOR CHAFFS EXTRACTION.
ALARM SYSTEM BY BUZZER AND SIGNAL LAMP, UPON INTERVENTION OF THE OVERLOAD PROTECTION DEVICES ON THE ELECTRIC-MOTORS AND ON THE BURNER.
PROTECTING SAFETY SYSTEMS.
CYCLONE FOR COOLING TANK: STANDARD ON MOD. 240-300- 360-480.
OPTIONALS EQUIPMENT

COMPUTERIZED AUTOMATIC ROASTING PROCESS CARP MANAGED BY PC AND MONITOR.
HEATING RECOVERY SYSTE
SMOKE BURNER TYPE THERMICAL AND/OR CATALYST
CLEAN AIR ROASTING SYSTEM
CHAFFS COMPACTOR.

Learn More

R-6855 STA IMPIANTI MILLENNIUM 3 ROASTING MACHINES

THE ROASTING MACHINES SERIES MILLENNIUM 3 REALIZED BY STA IMPIANTI SRL CONFIRM THEMSELVES CAPABLES OF A WORLD LEADING TRADE MARK IN DESIGN AND PROJECTATION OF INDUSTRIAL AUTOMATIC ROASTING MACHINES FOR COFFEE AND OTHER SIMILAR PRODUCTS. THESE MACHINES, ALLOWING HIGHLY INTEGRATED TECHNOLOGICAL SOLUTIONS, ANTICIPATE THE MOST ADVANCED MARKET DEMANDS.
THANKS TO THE CONSTANT PURSUIT OF HIGH QUALITY STANDARD AND THE COMPANY’S DESIRE TO PROVIDE AT THE SAME TIME A PRODUCT TAILORED TO THE NEEDS OF EACH CLIENT COMPANY, STA IMPIANTI SRL IS ABLE TO OFFER THE BEST SOLUTION IN THE MARKET.

THE ROASTING MACHINES SERIES MILLENNIUM 3 ARE GUARANTEE OF THE HIGHEST STANDARDS OF TECHNOLOGY DECLINED

ON CONCEPS OF HIGH PRODUCTION, MAXIMUM PERFORMANCE, RELIABILITY TOTAL SAFETY WITH LOW NOISE AND ENVIRONMENTAL EMISSIONS.

STANDARD EQUIPMENT:

ELECTRIC CONTROL BOARD WITH PLC + TOUCH SCREEN FOR FULL AUTOMATIC OR PARTIAL DRIVE.
AUTOMATIC ROASTING PROCESS WITH RECORDING – STORAGE OF ROASTING PARAMETERS
SYSTEM CONTROL THROUGH PLC + TOUCH SCREEN
FITTINGS FOR PC
ALARM SYSTEM BY BUZZER AND SIGNAL LAMP WITH DISPLAY ANOMALIES.
PRE-HEATING SYSTEM FOR RAW COFFEE IN STAND-BY
TEMPERATURE COFFEE CONTROL BOTH DURING ROASTING AND COOLING CYCLE.
HOT AIR GENERATOR (STA IMPIANTI‘ PATENTED SYSTEM)
“LOW INERTIA” DEVICE FOR IMMEDIATE STARTING OF PRODUCTION
INDUSTRIAL GAS BURNER TYPE MODULATING OR GASOIL BURNER AT MULTI STAGES OF FLAME ACCORDING APPLICATION.
PROCESS AIR ADMITTANCE CONTROL SYSTEM
FITTINGS FOR CLEAN AIR BY AIR EXCHANGER
CONTROL BOARD COMPLETE WITH LIGHTING DEVICE
SCREENER WITH PNEUMATIC DRAWING
WATER PUMP COMPLETE WITH TANK AND SAFETY BY PASS DEVICE
PRE COOLING SYSTEM OVER ROASTING DRUM
PRE COOLING SYSTEM CONNECTED TO THE COOLER
FIRE PREVENTION SYSTEM LINKED TO THE CYCLONE-CHAFFS COLLECTOR.
CYCLONE-CHAFFS COLLECTOR WITH DRIVEN STAR VALVE
CYCLONE FOR COOLER AND DESTONER
SELF CLEANING COOLING TANK
ADDITIONAL EMERGENCY UNLOADING FOR COOLER
INTEGRATED DESTONER
SERVOCONTROL DEVICE FOR REMOTE ADJUSTMENT OF DESTONER
SOUND PROOFING SYSTEM
GLOBAL SAFETY PROTECTION
OPTIONAL EQUIPMENT

COMPUTERIZED AUTOMATIC ROASTING PROCESS CARP MANAGED BY PC AND MONITOR.
CLEAN AIR BY AIR GENERATOR-EXCHANGING SYSTEM
POST COMBUSTOR TYPE THERMAL BURNER OR CATALYTIC
EXTERNAL DRAWING AIR (QUICK FRESH) SYSTEM
DESTONER WEIGHING CELLS
CHAFFS COMPACTOR.
HEATING ADDUCTION SYSTEM:

PATENTED SYSTEM BY STA IMPIANTI SRL SPECIFICALLY STUDIED FOR ROASTING LINE APPLICATIONS. THIS SYSTEM ALLOWS SHORTER AND HOMOGENEOUS ROASTING TIME:

BY CONVECTION HOT AIR FLOWING THROUGH THE COFFEE IN THE DRUM
BY CONDUCTION DUE TO THE HEATED ROASTING DRUM
BY IRRADIANCE FROM THE GRATE LOCATED BETWEEN THE FLAME AND THE ROASTING DRUM (INFRARED RAYS)
HOT AIR GENERATOR:

THREE ARE THE POSSIBILITIES OF SETTLEMENT TO THE OVER INDICATED SYSTEM:

AIR BY AIR EXCHANGING SYSTEM WITH RECOVERY DEVICE (100% CLEAN AIR)
CONVENTIONAL GENERATOR
HEATING GENERATOR WITH PARTIAL OR TOTAL RECYCLE

Learn More

R-6854 BUHLER ROASTMASTER™20

THE ROASTMASTER™20 BY BUHLER OFFERS EXACTLY WHAT START-UP BUSINESSES AND SMALL-SCALE INDUSTRIAL OPERATIONS REQUIRE TO PRODUCE TOP-QUALITY COFFEE. THE CAPACITY RANGES UP TO 70 KG OF GREEN BEANS PER HOUR. HOT AIR IS THE BEST CHOICE TO ENSURE A UNIFORM ROAST. ALL HOT AIR PASSES THROUGH THE ROTATING DRUM AND TRANSFERS ITS HEAT DIRECTLY TO THE BEANS IN A HOMOGENEOUS WAY. THIS HOT AIR PATHWAY ENSURES A HIGH PROPORTION OF CONVECTIVE HEAT TRANSFER RATHER THAN TO HEAT THE DRUM FROM BELOW. NO MATTER AT WHICH STAGE OF THE PROCESS, THE VARIABLE DRUM SPEED AND THE SOPHISTICATED INTERIOR DESIGN OF THE ROASTING CHAMBER DELIVER AN OPTIMAL BEAN DISTRIBUTION AND AN EFFICIENT INTERACTION OF THE BEANS WITH THE AIR. SILVERSKINS ARE SEPARATED IN THE CYCLONE. THE COMPACT DRUM ROASTER IS EQUIPPED WITH SEPARATE HEATING AND COOLING FANS WHICH ALLOW TO ROAST AND COOL AT THE SAME TIME. AN INNOVATIVE AND EASY-TO-USE PLC CONTROL SYSTEM ENSURES QUALITY CONSISTENCY DURING PRODUCTION BUT ALSO LEAVES ROOM FOR MANUAL INTERVENTION TO STEER THE PROCESSING WHEN NECESSARY.

ROASTMASTER™20. PROCESS FLEXIBILITY FOR YOUR FLAVOR SIGNATURE.
EACH COFFEE VARIETY IS UNIQUE BY NATURE AND REQUIRES INDIVIDUAL ROASTING CONDITIONS TO TRANSFORM THE FULL INTRINSIC FLAVOR POTENTIAL INTO GREAT FLAVOR. THE ROASTMASTER™20 IS EQUIPPED WITH A FULLY VARIABLE BURNER FOR FLEXIBLE ENERGY INPUT. THE FREQUENCY CONVERTER ON THE MAIN FAN ALLOWS FOR VARIABLE SPEED AND OPTIMIZED AIR-TO-BEAN-RATIO DURING THE DIFFERENT STAGES OF THE PROCESS. REGARDLESS WETHER YOU PREFER TRADITIONAL OR NON-CONVENTIONAL PROFILES, THE SOPHISTICATED MULTISTEP PROCESS CONTROL SOFTWARE INSPIRES PROFILE ROASTING FOR BEST FLAVOR GENERATION.

DATA MANAGEMENT AND NEXT GENERATION CONNECTIVITY.
THE FUTURE-SAFE CONCEPT INCLUDES AN EASY-TO-USE PLC CONTROL SYSTEM WITH INTEGRATED TOUCH PANEL, RECIPE MANAGEMENT, ONLINE TREND MONITORING, BATCH REPORT CREATION AND SAFETY FEATURES. MOREOVER THE EASY DATA EXPORT VIA USB PORT, ONLINE DATA TRANSFER TO EXTERNAL THIRD PARTY PROCESS MONITORING SOFTWARE AND REMOTE HMI VISUALIZATION AND PROCESS CONTROL ENSURE QUALITY CONSISTENCY DURING PRODUCTION.

Learn More

P-7203 TEHNOLOG COFFEE ROASTERS YEAR 2011 – MODEL HORNO

TEHNOLOG
MODEL: HORNO
COFFEE ROASTERS
YEAR: 2011
CAPACITY: 150KG to 170KG
ELECTRIC 45KW
FULLY STAINLESS STEEL
WITH MANUAL
EXCELLENT CONDITION
MACHINE HAS NO COOLER
WITH CERTIFICATE

QUANTITY: 1

Learn More

R-5794 JABEZ BURNS COFFEE ROASTING SYSTEMS, 500 LB, COOLER, AFTERBURNER

COFFEE ROASTING SYSTEMS
MANUFACTURED BY JABEZ BURNS
MODEL: “JUBILEE ROASTER.” PREVIOUSLY RUNNING 400 LB. BATCHES
RATED FOR A MAX CAPACITY OF APPROX. 525 LBS
COMPLETE WITH ROTARY ROASTER
MAXON GAS-FIRED BURNER
66” DIAMETER COOLING TABLE WITH THREE RAKES
DESTONER SYSTEM
AFTERBURNER SYSTEM WITH REFRACTORY LINING
ROASTER FAN
COOLING FAN
(2) UNIVERSAL BUCKET ELEVATORS (APPROX. 18’ HIGH)
CYCLONES
DUCT WORK
GAS TRAIN
CONTROLS
ETC
PREVIOUSLY OPERATED AT APPROX. 1200 DEG. F
IN GOOD WORKING CONDITION WHEN REMOVED FROM SERVICE AND STORED INDOORS SINCE REMOVAL

QUANTITY: 2

Learn More