Search results for: 'Cutting+machine+ed'

M-5175 OLBRICH COATING LINE FOR MANUFACTURING TARPAULIN AND BANNER PVC COATED FABRICS 3300mm

KNIFE OVER ROLL COATING
LIST OF EQUIPMENT FOR MANUFACTURING OF PVC COATED FABRICS, LINE CAN APPLY ANY TYPE OF COATING INCLUDING WATER BASED OR SOLVENT BASED AND EITHER CLEAR COAT THE FABRIC OR SATURATE COAT ANY WOVEN FABRIC , CAN ALSO DO SUNBRELLA TYPE TECHNICAL TEXTILES
FOR ONE SIDE COATING WITH KISS COATER

MANUFACTURED BY OLBRICH GMBH (ERECTED IN 2005) 3400mm (SCRIM CAN BE 3400mm WIDTH)
CAN MAKE 3350mm COATED FABRIC AND AFTER TRIMMED EDGES HAVE A FINISHED PRODUCT OF 3300mm (BEGINNING WITH A 3400mm SCRIM , THERE ARE INBUILT CUTTING BLADES FOR TRIMMING .
MANUFACTURED IN GERMANY BEGINNING 2003 AND 2004

COATING LINE
UNWINDER
PENDULUM
WEB CONTROL UNIT
PULLING STATION
PENDULUM
HEATING ROLLER (DIAMETER 570 mm)
PLATFORM
SAWING GAUGE
DOUBLE-KNIFE (DOCTOR) VERTICAL COATING MACHINE
VERTICAL DRIER
COOLING STATION WITH ROLLER LOCK
PENDULUM
SMOOTHING ROLL
MACHINE FRAME
IDLER ROLLER BRIDGE
PULLING STATION
PLATFORM
COATING MACHINE (KNIFE-OVER-ROLL)
HORIZONTAL DRIER
COOLING STATION
IDLER ROLLER BRIDGE
PLATFORM
SMOOTHING CALENDER
SUCTION HOOD
LACQUERING MACHINE (ZIMMER)
TEMPERATURE CONTROL UNIT
DRYER
ACCUMULATOR OF FABRIC
COMPUTER WITH SOFTWARE CONTROL
(SIEMENS)
ELECTRICAL CONTROL PLANT
WEIGHT-PER-UNIT-AREA
MEASURING GAUGE (2 UNITS MAHLO)-ISOTOPE NOT INCLUDED
REWINDER
FREE STANDING SLITTER-REWINDER (SEE PHOTO ATTACHED)
TRIMMING GOUGE

PERIPHERAL EQUIPMENT
LIQUIFIED GAS EQUIPMENT RH80 (RANSOME MANUFACTURING USA)
EVAPORATOR-RANSOME (USA)
CHILLER (ITALY) WITH EXPANSION TANK
BOILER ERENSAN MODEL 2000 (ISI SANAYI A.S. TURKEY) FOR HEATING OIL WITH EXPANSION TANK.
\BOILER FOR HEATING BUILDING, NOT INCLUDED
REGENERATIVE THERMAL OXIDIZER (RTO) ENVIROLOGIC USA
12 STAINLESS STEEL CONTAINERS FOR PLASTISOL VOLUME -1 M3
VACUUM DISSOLVER (SRUGO)-2 UNITS
PIPING, EXHAUST VENT PIPES (NO BUILDING HEATING PIPES )
OVERHEAD CRANE NOT INCLUDED

FLOORSPACE OCCUPIED BY THE LINE:
LENGTH 67,125mm
WIDTH 6200mm
HEIGHT 8100mm

SPEED 3 TO 30 M/MIN

HEATING SYSTEM: OIL

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: M-1758 (6602BHBBE5U) GEOTEXTILE CALENDER MACHINE -5700mm- YEAR 2004 MAKE: BOMBI MECCANICA ITALY 5.7 M WIDE GEOTEXTILE CALENDER MACHINE YEAR: 2004 IS IN PERFECT CONDITION FEW HOUR PRODUCTION IT IS CONNECTED AND CAN BE SHOWN TO CUSTOMERS VOLTAGE: 440V / 60 HZ / 3 PHASES UNWINDER ACCUMULATORS WITH ROLLS, 50M OF CONTENT 2 ROLLS CALENDER 5.7 WIDE 200,000 KCAL/HR GAS OIL HEATER UPPER HOOD FOR THE SMOKE COLLECT METAL DETECTOR INSTALLED ON TOP OF CALENDER ADJUSTING 2 ROLLS TEMPERATURE INDEP. ACCUMULATORS WITH ROLLS, 50 M LONG CROSS CUTTER W/6 LONG SLITTERS, AND EXIT BELT WINDER OPTION ROLL DISCHARGER 2.3 M WINDER, SPEED UP TO 30 M/MIN, READY TO BE SYNCHRONIZED 2.3 M WIDE, EDGE TRIMMERS WITH 2 DISC BLADES FELT WIDTH: 5.5 METER WEB THICKNESS AT ENTRY: AROUND 1 TO 2 mm WEB PREPARATION AT THE INLET: CROSS LAPPING AND NEEDLING PRODUCTION LINE SPEED: UP TO 25 M/MIN TYPE OF TREATMENT: HEAT SETTING, SMOOTHING OF THE SURFACES AND CALIBRATION, CUTTING AND ROLLING UP FELT WEIGHT: 90 TO 300 GSM FIBERS: POLY COTTON BLEND, POLYESTER, ACRYLIC, POLYPROP THERMOSETTING TEMEPRATURE: UP TO 225°C QUANTITY AVAILABLE: 1 Learn More

TT-6211 REIFENHAUSER REICOFIL NON-WOVEN LINE, WIDTH 1600mm 1. BRAND REIFENHAUSER 2. REIFENHAUSER REICOFIL 1600 NON-WOVEN LINE 3. USED NONWOVEN MACHINERY LIKE NEW, WITH A MATERIAL WIDTH UP TO 1600mm AND SCREW DIAMETER OF 100mm. 4. BRAND & MODEL: REIFENHAUSER REICOFIL 1600 QUANTITY: 1 Learn More

TT-4359 NEEDLE PUNCHING LINE, YEAR 1993 TO 2023 CARDING + LAPPING + DILO NEEDLE LOOM OUG II-S40 BRAND: TRUTZSCHLER, REISKY & SCHLESE, DILO, MESUTRONIC, TEMAFA FIBER: SYNTHETIC & VISCOS FIBER FINENESS: 1.7 TO 6.7 DTEX Learn More

TT-3988 MASIAS/ASSELIN/KARL MAYER/BOMBI/LAROCHE NEEDLING LINE, WORKING WIDTH 4700mm, YEAR 1991 TO 2006 NEEDLING LINE YEAR: 1991 TO 2006 WITH UPGRADED ELECTRONICS WORKING WIDTH: 4700mm QUANTITY: 1 LINE Learn More

TT-1956 TITAN SR6 FILM CUTTING MACHINE, FILM WIDTH 1300mm, YEAR 1994 TYPE: TITAN SR6 BRAND: TITAN CONVERTING EQUIPMENT LTD. YEAR OF PRODUCTION: 1994 FILM TYPE: BOPP MAXIMUM FILM WIDTH: 1300mm TOP SPEED: 450 M/MIN QUANTITY: 1 Learn More

TT-1955 ATLAS II OCSE 620R FILM CUTTING MACHINE, FILM WIDTH 2200mm, YEAR 1998 TYPE: ATLAS OCSE 620R BRAND: ATLAS CONVERTING EQUIPMENT LTD. YEAR OF PRODUCTION: 1998 FILM TYPE: BOPP MAXIMUM FILM WIDTH: 2200mm TOP SPEED: 600 M/MIN QUANTITY: 1 Learn More

TT-1733 KAMPF 106 SLITTER, WORKING WIDTH 1640mm, YEAR 1965 - RESTORED 2007 KAMPF 106 SLITTER YEAR 1965 RESTORED 2007 THE MACHINE WAS MECHANICALLY AND ELECTRICALLY RESTORED 2007 WORKING WIDTH: 1640mm MATERIALS: PAPER, LAMINATES, PP, PET, LDPE ETC. WORKING SPEED: MAX. 300 METERS/MINUTE CUTTING WITH DIRECT AND ROTARY KNIVES CUT WIDTH 50 TO 1600mm QUANTITY: 1 Learn More

YY-2072 AUTOMATIC HEMMING MACHINE, SEWING WIDTH 1000 TO 2400mm -OUTPUT: 2 TO 3 PIECES/MINUTE TECHNICAL PARAMETERS: DIMENSIONS (L X W X H): 3235 X 4065 X 2035mm SEWING WIDTH: 1000 TO 2400mm MAXIMUM SEWING THICKNESS: 80mm STITCH: 3 TO 12mm POWER: 10 KW WEIGHT: 2800 KG VOLTAGE: 220 VOLTS 50/60Hz OR 380 VOLTS 50Hz OUTPUT: 2 TO 3 PIECES/MINUTE QUANTITY: 1 Learn More

CAPACITY: 100 TO 120 PER MINUTE
AUTOMATIC CONVEYING
CUT OFF THE BRIDGE OF THE NOSE
MASK EDGE WELDING
FOLDING
ULTRASONIC FUSION
WITH AUTOMATED MOLDING AND CUTTING
IT CAN BE USED AS A MASK WITH 1-4 LAYERS OF CLOTH ( THE ACTIVATED CARBON MATERIAL CAN BE
ADDED IN THE MIDDLE )
RATED POWER 10KW ( INCLUDING WELDING MACHINE)
DIMENSIONS: SIZE (L) 6500 x 3500 (W) x 1950 (H) mm

QUANTITY: 1

Learn More