Search results for: 'model no.'

TT-3601 CATERPILLAR G3516 GENERATOR SETS, 810 KW, YEAR 2001 USED ALL WERE JUST IN USE AS STANDBY AT A HOSPITAL BUILD DATE CIRCA 1/1/2001 810 KW WOF – 4160 V Learn More

TT-3566 DILO VE-4, WIDTH 6000mm, YEAR 1987 BRAND: DILO NON WOVEN MODEL: VE-4 CONDITION: USED YEAR: 1987 QUANTITY: 1 Learn More

TT-3338 ROTOMEC ROTOGRAVURE PRINTING PRESS, 8 COLORS, WIDTH 1320mm, YEAR 2002 MACHINE MANUFACTURER ROTOMEC (NOW BOBST) MODEL ROTPACK 1320 3000-3R YEAR 2002 QUANTITY: 1 Learn More

TT-2909 PROBAT 23R ACO ROASTING PLANT, 240 KILO, YEAR REFURBISHED 2018 PROBAT-BURNS ACCLAIMED 23R ACO COFFEE ROASTING PLANT 4-BAG COFFEE ROASTING PLANT PROBAT-BURNS MODEL 23R “ACO” (AUTOMATIC CLEAN OUT) CAPACITY IS REPORTED TO BE 200 TO 540 LBS. (90 TO 240 KG) @ 4-5 BATCHES PER HOUR (NOMINAL). THAT'S UP TO 2,500 LBS. (1,134 KG) PER HOUR THIS MACHINE HAS ONLY RAN 3 HOURS P/DAY FOR LESS THAN 3 YEARS SINCE PUT ONLINE AFTER COMPLETE REFURBISH IN 2018. THIS EQUIPMENT SET IS CURRENTLY DECOMMISSIONED AND DISASSEMBLED SITTING ON PALLETS, READY FOR FREIGHT PREP AND SHIPPING. COMPLETELY REFURBISHED IN 2018, IT HAS BEEN OFFLINE FOR ABOUT 9 MONTHS. IT'S IN EXCELLENT CONDITION, RUNS PERFECTLY. FUELED BY NATURAL GAS, POWERED BY 480 VOLT. THIS 23R ACO HAS MANUAL ROAST CONTROLS. CAN BE UPGRADED TO FULLY AUTOMATED Learn More

TT-2331 SSI DUAL-SHEAR SHREDDER, 31” CHAMBER, NOMINAL CUTTER THICKNESS 50mm SSI DUAL-SHEAR SHREDDER USED MODEL M100E(63) QUANTITY: 1 Learn More

TT-2330 SSI DUAL-SHEAR SHREDDER, CHAMBER 31", NOMINAL CUTTER THICKNESS 50mm SSI DUAL-SHEAR SHREDDER UNUSED MODEL M100E(63) QUANTITY: 1 Learn More

TT-1420 FLEXOGRAPHIC PRINTER, 8 COLORS, PRINTING WIDTH MAX. 1300mm MIN 640mm, YEAR 1997 FLEXOGRAPHIC PRINTER 8 COLORS SYRIO MODEL MADE BY SCHIAVI, ITALY FLEXO CENTRAL DRUM, GEARED YEAR MANUFACTURED IN 1997/ IN 1998 FIRST RUN PRINTING GROUPS: 8 AROUND THE CENTRAL DRUM MATERIAL PASSAGE WIDTH: MAX. 1320mm MIN 660mm PRINTING WIDTH: MAX. 1300mm MIN 640mm PRINTING DEVELOPMENTS: MIN. 300mm MAX 900 MAX SPEED PRINTING: 300 TO 350 MPM PLATE THICKNESSES: ANILOX: 1.14mm PLATE HOLDER: INTEGRAL INK TYPES: SOLVENT BASED PRINTING POSSIBILITIES: 8+0 INVERSION BAR TO DO: 4+4 (CURRENTLY NOT USED) AVAILABLE: IMEDIATELY CAN BE TESTED QUANTITY: 1 Learn More

J-3004 FIBRILLATED RAFFIA TAPE EXTRUSION LINE – NEW, 120mm PP FIBRILLATED YARN EXTRUDER LINE MODEL: NOVASTAR-120 EXTRUSION LINE FOR PRODUCTION OF PP FIBRILLATED YARN RAW MATERIAL: PP GRANULE FINISHED PRODUCTS: NON-TWISTED TAPE YARN, FIBRILLATED YARN FOR TWINE RANGE OF PRODUCT: 10,000 TO 30,000 DENIER 10000 DENIER APPROXIMATELY 17 TO 19 YARN 16000 DENIER APPROXIMATELY 11 TO 12 YARN 22000 DENIER APPROXIMATELY 8 TO 9 YARN 28000 DENIER APPROXIMATELY 6 TO 7 YARN 32000 DENIER APPROXIMATELY 5 TO 6 YARN EXTRUSION THROUGHPUT: 300 KG PER HOUR EXTRUSION CAPACITY: 180 TO 250 KG PER HOUR (PRODUCT CAPACITY DEPEND ON FILAMENT SIZE) EXTRUDER SCREW DIAMETER: Ø 120mm T-DIE WIDTH: 1300mm TAKE-OFF ROLLER WIDTH: 1200mm TAKE-OFF LINE SPEED: 160 METERS PER MINUTE (MAXIMUM) OPERATION SIDE: RIGHT TO LEFT, OR LEFT TO RIGHT Learn More

TT-5686 ELLIOTT STEAM TURBINE, 2000 KW, YEAR 2011 ELLIOTT STEAM TURBINE MODEL 2DYR5PE III USED QUANTITY: 1 Learn More

J-4941 AUTOMATED INDUSTRIAL MACHINERY AFM 2 DG WIRE BENDING MACHINE MAKE: AIM (AUTOMATED INDUSTRIAL MACHINERY) MODEL: AFM 2 DG (ACCUFORM MODULAR 2DX) TILTING TABLE SINGLE STAGE BENDING HEAD OPTIONS: P8 F1 WE SERIAL NUMBER: C 3 F0701 2009 WIRING DIAGRAM: AFM 2D6 – P8WEF1 – 490 – V8 – 3 VOLTAGE: 460 VOLTS FREQUENCY: 50 / 60 Hz FULL LOAD: 40 KVA LARGEST LOAD: 9 KVA DIMENSIONS OF THE STAINLESS STEEL TABLE: WIDTH 15 FEET 1 INCH x LENGTH 10 FEET 5 inches LOWER STAINLESS STEEL TABLE EXPENSION DIMENSIONS: WIDTH 8 FEET x LENGTH 37.5 INCHES QUANTITY: 1 Learn More