Search results for: 'Edge t'

REFERENCE NUMBER: K-4932 AUTOMATIC EDGE-CENTER HOTMELT MACHINE QUANTITY AVAILABLE: 1 Learn More

TRANSFER PRINTING RANGE, CONSISTING OF; A. JACK STAND AND STAINLESS J-SCRAY WITH EDGE SENSORS B. OPERATOR PLATFORM C. SINGER(?) TRANSFER MACHINE WITH 36" DIA. X 149" FACE WIDTH HOT-OIL CYLINDER INTERNALLY HEATED OIL BATH BY CHROMALOX ELECTRIC HEATING RODS, 126" FACE NOMEX BLANKET, CONTROLS. D. DSI A-FRAME WINDER, DIRECT COUPLING TO SPLINE SHAFT, 7.5-HP Learn More

YY-2029 FULLY AUTOMATIC FOUR EDGE-SEALING GAUZE PACKING MACHINE TECHNICAL PARAMETERS: 1. BAG SIZE: BASED ON CUSTOMER'S REQUEST; 2. SPEED: 120 TO 180 BAGS/MIN; 3. PACKING MATERIALS: PAPER + PAPER, PAPER + PLASTIC, 4. PACKAGE MATERIAL DIAMETER Φ≤350mm, WIDTH IS BASED ON CUSTOMER'S REQUEST; 5. VOLTAGE: 3 PHASE 380V 50Hz OR 220V 50/60Hz; 6. MOTORS: a. SERVO MOTOR 1.5KW b. SERVO MOTOR: 1KW c. STEPPING MOTOR 110 d. STEPPING MOTOR VARIABLE FREQUENCY MOTOR 0.37KW 7. TOTAL OF 5 MOTORS IS 4KW 8. USES 28 VOLT FOR THE HEAT CIRCUIT, 2 HEATING PANELS, EACH PANEL WITH 8 HEATING TUBES, EACH TUBE IS 300 W, TOTAL 4.8 KW; 9. MACHINE WEIGHT: 800 KG; 10. MACHINE SIZE: LENGTH 5000 × WIDTH 1300 × HEIGHT 1600mm; 11. CRATE SHIPPING DATA: LENGTH 2600 × WIDTH 1900 × HEIGHT 1800mm. 12. TOTAL OF 5 MOTORS IS: 4KW QUANTITY: 1 Learn More

TT-4047 ALAN DUFFY CENTER SURFACE SLITTER, 65”, REWINDER 40” OD REWIND, YEAR UPGRADED 2021 65” ALAN DUFFY CENTER SURFACE SLITTER REWINDER 40” OD REWIND UPGRADED IN 2021 SINGLE SHAFT UNWIND. 3” AIR SHAFT CAN ACCOMMODATE 40” PACKAGE WEB WIDTH UP TO ~ 65” CONDITION: USED QUANTITY: 1 Learn More

TT-2200 STANFORD MODEL 338 DUPLEX CENTER SLITTERS, WIDTH 62” CURRENTLY RUNNING Learn More

TT-1726 POLYPROPYLENE TAPE LINE EXTRUDER 15 TONS DAILY CAPACITY, 264 WINDERS, YEAR 2012 POLYPROPYLENE TAPE LINE EXTRUDER 15 TONS DAILY CAPACITY CONDITION: USED MODEL: POLYPROPYLENE TAPE LINE EXTRUDER CAPACITY: 15 TONS DAILY CAPACITY YEAR: 2012 QUANTITY: 1 Learn More

J-4483 EDGE SWEETS 60-88 PVT HORIZONTAL FOAM CUTTING MACHINE MAKE: EDGE SWEETS MODEL: 60-88 PVT YEAR: 2005 90 INCH WIDE BLADE GUIDE QUANTITY: 1 Learn More

T-9906 EASTMAN EAGLE EC3 CNC FABRIC CUTTING MACHINE, 78” X 16’, YEAR 2012 VOLTAGE: 220/400/440 VAC 3-PHASE 50/60 Hz EQUIPPED WITH: PC COMPUTER PNEUMATIC ROLLER 2 ROLL STANDS WITH EDGE CONTROL UNDER POWER FOR INSPECTION QUANTITY: 4 Learn More

REFERENCE NUMBER: M-4086

EDGE SAW E-3 VERTICAL SLITTER

 

EDGE SAW VERTICAL SLITTER

MODEL: E-3

HEIGHT FROM TABLE TO TOP NECK (BLADE HEIGHT): APPROXIMATELY 53” INCHES

TABLE SIZE: (LENGTH: 137” INCHES) (WIDTH: 72” INCHES)

TABLE SIZE: (LENGTH: 137” INCHES) (WIDTH: 49” INCHES)

RAILS APPROXIMATELY 20 FEET LONG

THE MACHINE IS DISMANTLED

Distance from blade to neck is 72 inches

 

QUANTITY: 1

Learn More

INVENTORY NUMBER: E-3486 SPUHL TRANSFER COILERS AND OTHER EQUIPMENT FOR SALE: ITEM A SPUHL TRANSFER COILER/ASSEMBLER THIS MACHINE IS ALMOST FTA 220 (ALL UNITS ARE SPUHL) ORIGINAL FTA-72 FRAME RUNNING 252 COIL COUNT FOR SOFA BED, 4" HIGH LIKE AN FTA-220 BUT NO COMPUTER NEW KNOTTERS NEW GENEVA CENTRAL LUBRICATION NEW HEAT TREATERS FOR FTA-220 NEW KNUCKLERS (QUICK CHANGE) TYPE VL-180 13 JAWS ASSEMBLER UP TO QUEEN SIZE PICTURES: http://www.americanplantandequipment.com/e-3486coiler/e-3486coiler.htm QUANTITY: 1 ITEM B - SOLD - SPUHL TRANSFER COILER/ASSEMBLER (ALL UNITS ARE SPUHL) NO KNOTTERS F 65 SW COILER UP TO QUEEN SIZE 15 JAWS ASSEMBLER 312 COIL COUNT ITEM C TWO VRC STANLEY BOSTITCH AUTOMATIC CLIPPING MACHINES (PICTURES AVAILABLE) QUANTITY: 2 ITEM D ONE INNERSPRING BALER (CRATER) WITH AUTOMATIC CRATE STAND-UP UNIT ONE PERSON MAKES CRATES BY HIMSELF PICTURES: http://www.americanplantandequipment.com/e-3486baler/e-3486baler.htm QUANTITY: 1 ITEM E EDGE SUPPORT MACHINES (DOUBLE EDGE GUARD) PRODUCES 3000 PER DAY SHIFT ON (PICTURES AVAILABLE) ITEM F ONE WELDING MACHINE (PICTURE AVAILABLE) QUANTITY: 1 ITEM G ONE WIRE STRAIGHTENER (PICTURES AVAILABLE) Learn More