Search results for: 'Panel+c''

•PRODUCT NAME: WEIGHING DOWN & FEATHER FILLING MACHINE •TYPE: EF-1 •DIMENSION: 7500*2500*3500MM •VOLTAGE: 380V 50HZ 3PHASE •POWER: 11KW •FILLING RANGE: 2-100 G, DEPENDING ON THE MATERIAL •ACCURACY: ±0.2G，±1G，±1.5G,DEPENDING ON THE FILLING WEIGHT •AIR SUPPLY: 0.5-0.8MPA •WEIGHT: APPROX. 800KG Learn More

REFERENCE NUMBER: F-1427

FEATHER FILLING MACHINE MODEL SR-1

PRODUCT FEATURES

•             FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•             AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•             FILLING TIME IS 2 TO 5 SECONDS

•             NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•             CE CERTIFICATE

 

•             PRODUCT NAME: WEIGHING DOWN & FEATHER FILLING MACHINE

•             TYPE: SR-1

•             DIMENSION: 7500 x 2500 x 3500MM

•             VOLTAGE: 200/380/415V 50/60HZ 3PHASE

•             POWER: 11KW

•             FILLING RANGE: 2 TO 100 G, DEPENDING ON THE MATERIAL

•             ACCURACY: ±0.5G，±1.0G，±1.5G,DEPENDING ON THE FILLING WEIGHT

•             AIR SUPPLY: 0.5 TO 0.8MPA

•             WEIGHT: APPROX. 800KG

•             THE AUTOMATIC DOWN AND FEATHER FILLING MACHINE IS MAINLY USED TO PRODUCE JACKETS, SLEEPING BAGS, CUSHIONS, PILLOWS, PADS AND COMFORTERS THAT MADE WITH DOWN AND FEATHER MATERIAL BY COMPUTERIZED WEIGHING SYSTEM.

•             THREE HOPPER-SYSTEM( FOR ONE FILLING PIPE) FOR CONSTANT SUPPLY

•             THE SYSTEM IS THE VACUUM FILLING FUNCTION AND DOES NOT HURT THE MATERIAL; IT KEEPS THE ORIGINAL ELASTICITY AND SOFT HAND FEELING.

•             ACCURATE WEIGHING RESULTS; THE TOLERANCE IS WITHIN 0.2 GRAM. IT CAN BE ADJUSTED ACCORDING TO THE PRODUCTION REQUIREMENT AND CHOOSE TOTAL ERROR OR SINGLE ERROR FROM THE CONTROL PANEL. THIS CONTROLS FOR THE PRODUCTION QUALITY AND MATERIAL WASTE

•             ONE FILLING PIPE CAN BE HANDLED BY 1 OPERATOR BY VERY SIMPLE OPERATION WHICH SAVES YOU A BIG AMOUNT OF LABOR COSTS..

•             THE KEY ELECTRICAL COMPONENTS ARE IMPORTED, SO THAT THE QUALITY IS RELIABLE AND STABLE.

•             THE WHOLE LINE OPERATION IS CONTROLLED BY PLC SYSTEM

•             ACCORDING TO DIFFERENT QUANTITY AND QUALITY REQUIREMENTS THE MACHINE CONTROL PANEL CAN BE SET UP FOR 100 DIFFERENT RECIPES AND EACH RECIPE CAN BE 80 SETS DIFFERENT WEIGHT VALUE FOR FILLING OPTIONS

•             AVERAGE FILLING TIME CAN BE 2 TO 5 SECONDS (DEPENDING ON THE WEIGHT AND FABRIC) AND THE FILLING TIME CAN BE ADJUSTED

•             DIFFERENT CUSTOMER REQUIREMENTS CAN BE CONSIDERED BY OUR PROFESSIONAL ENGINEERS TO WORK ON OUR MACHINES TO MATCH THE CUSTOMER’S NEED.

 

•             MATERIAL HOPPER: DIA. 1700 x 2500MM              1PCS

•             WEIGHING SYSTEM: 1200 x 1000 x 1000MM         3 PCS(6SETS)

•             FILLING TABLE :1200 x 550 x 1500                               2 PCS

•             PLC CONTROL SYSTEM AND CONTROL PANEL:     2 SETS

•             AIR OUTPUT BOX: 1200 x 1800 x 1700MM             1 PCS

•             MATERIAL FEEDING BOX: 1200x1200x2500MM   1 PCS

•             BLOWER:                                                                             6PCS

•             PIPE SYSTEM:                                                                     1SET

 

Learn More

REFERENCE NUMBER: F-1430

FEATHER FILLING MACHINE MODEL SR-180

 

PRODUCT FEATURES

•              FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•              AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•              FILLING TIME IS 2 TO 5 SECONDS

•              NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•              CE CERTIFICATE

 

•              TYPE : SR-180/280/380/480

•              DIMENSION: 1200 x 1500 x 2000MM

•              VOLTAGE: 200/380/415V 50/60HZ 3PHASE

•              POWER: 2.2 KW

•              FILLING RANGE: 0.5-10 /1-50 G, DEPENDING ON THE MATERIAL

•              ACCURACY: ±0.2G/±0.5G

•              AIR PRESSURE: 0.5-0.8MPA

•              THE COMPUTERIZED DOWN & FEATHER WEIGHING FILLING MACHINE IS MAINLY USED TO FILL JACKETS, SLEEPING BAGS, CUSHIONS, PILLOWS, PADS, COMFORTERS ETC WITH A COMPUTERIZED WEIGHING SYSTEM.

•              TWO HOPPER-SYSTEM FOR CONSTANT SUPPLY.

•              THE VACUUM FILLING FUNCTION DOES NOT HURT THE MATERIAL AND KEEPS THE ORIGINAL ELASTICITY AND SOFT HAND FEELING.

•              ACCURATE WEIGHING RESULTS; THE TOLERANCE IS WITHIN 0.2 TO

0.5 GRAM (DEPENDING ON THE RANGE OF MEASURE). IT CAN BE ADJUSTED ACCORDING TO THE PRODUCTION REQUIREMENT AND CHOOSE GROUP ERROR OR SINGLE PIECE ERROR FROM THE CONTROL PANEL

•              THE WHOLE LINE CAN BE HANDLED BY ONLY 1 OPERATOR BY VERY SIMPLE

OPERATION WHICH SAVES YOU A BIG AMOUNT OF LABOR COSTS.

•              ALL THE MATERIALS ARE INSIDE THE HOPPERS WITHOUT PRODUCING ANY DUST THAT AFFECTS THE WORKING AREA

•              KEY ELECTRICAL COMPONENTS IMPORTED

•              THE WHOLE LINE OPERATION IS CONTROLLED BY PLC SYSTEM

•              ACCORDING TO DIFFERENT QUANTITY AND QUALITY PRODUCTION REQUIREMENTS THE MACHINE CONTROL PANEL CAN BE SET UP FOR 100 GROUPS OF RECIPES AND EACH RECIPE CAN BE 50 SETS OF DIFFERENT WEIGHT VALUE FOR FILLING OPTIONS

•              THE AVERAGE FILLING TIME CAN BE 4 TO 10 SECONDS (DEPENDING ON THE ACCURACY) AND THE FILLING TIME CAN BE ADJUSTE

•              DIFFERENT REQUIREMENTS OF THE CUSTOMER CAN BE CONSIDERED BY OUR PROFESSIONAL ENGINEERS TO WORK ON OUR MACHINES SO THEY ARE SUITABLE FOR YOUR PARTICULAR NEEDS

 

•              MATERIAL HOPPER:        1200 x 1500 x 2000MM                               1PCS

•              WEIGHING SYSTEM:        1200 x 400 x 1000MM                  1PCS

•              FILLING TABLE :1200 x 550 x 1500                                            1PCS

•              PLC CONTROL SYSTEM AND CONTROL PANEL:                     1SETS

•              BLOWER:                                                                                             1PCS

•              PIPE SYSTEM

Learn More

REFERENCE NUMBER: F-1429

down FILLING MACHINE MODEL SR-3

PRODUCT FEATURES

•             FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•             AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•             FILLING TIME IS 2 TO 5 SECONDS

•             NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•             CE CERTIFICATE

 

•             TYPE : SR-3

•             DIMENSION: 3000 x 2500 x 2000MM

•             VOLTAGE: 200/380/415V 50/60HZ 3PHASE

•             POWER: 3.8 KW

•             FILLING RANGE: 2-100 G, DEPENDING ON THE MATERIAL

•             ACCURACY: ±0.2G

•             AIR PRESSURE: 0.5 TO 0.8MPA

•            THE DEVELOPED COMPUTERIZED DOWN & FEATHER WEIGHING FILLING MACHINE IS MAINLY USED TO FILL JACKETS, SLEEPING BAGS, CUSHIONS, PILLOWS, PADS, COMFORTERS ETC THAT ARE MADE WITH DOWN & FEATHER AND CONTROLLED BY A COMPUTERIZED WEIGHING SYSTEM.

•             THREE HOPPER-SYSTEM FOR CONSTANT SUPPLY

•             THE VACUUM FILLING FUNCTION THAT DOES NOT HURT THE MATERIAL AND KEEPS THE ORIGINAL ELASTICITY AND SOFT-HAND FEELING.

•             ACCURATE WEIGHING RESULTS; THE TOLERANCE IS WITHIN 0.2 GRAM. IT CAN BE ADJUSTED ACCORDING TO THE PRODUCTION REQUIREMENT BY CHOOSING GROUP ERROR OR SINGLE PIECE ERROR FROM THE CONTROL PANEL, SO THAT THE PRODUCTION QUALITY IS ASSURED AND MATERIAL WASTE IS CONTROLLED

•             THE WHOLE LINE CAN BE HANDLED BY ONE OPERATOR WITH VERY SIMPLE

OPERATION

•             ALL THE MATERIALS ARE INSIDE THE HOPPERS WITHOUT PRODUCING ANY DUST THAT AFFECTS THE WORKING AREA

•             KEY ELECTRICAL COMPONENTS ARE IMPORTED

•             THE WHOLE LINE OPERATION IS CONTROLLED BY PLC SYSTEM

•             ACCORDING TO DIFFERENT QUANTITY AND QUALITY PRODUCTION REQUIREMENTS THE MACHINE CONTROL PANEL CAN BE SET UP FOR 100 GROUPS OF RECIPES AND EACH RECIPE CAN BE 50 SETS OF DIFFERENT WEIGHT VALUE FOR FILLING OPTIONS, WHICH IS ENOUGH TO FILL DIFFERENT PARTS OF THE SAME PRODUCTION.

•             THE AVERAGE FILLING TIME CAN BE 4 TO 10 SECONDS (DEPENDING ON THE ACCURACY) AND THE FILLING TIME CAN BE ADJUSTED

•             THE CUSTOMER’S DIFFERENT REQUIREMENTS ARE CONSIDERED BY OUR PROFESSIONAL ENGINEERS SO THAT THE MACHINES ARE SUITABLE FOR YOUR PARTICULAR NEEDS

•             MATERIAL HOPPER: DIA.1200 x 2000MM               1PCS

•             WEIGHING SYSTEM: 1200 x 1000 x 1000MM         1PCS(3SETS)

•             FILLING TABLE :1200 x 550 x 1500                               1PCS

•             PLC CONTROL SYSTEM AND CONTROL PANEL:     1SETS

•             BLOWER:                                                                             3PCS

•             PIPE SYSTEM

Learn More

YY-3235 GOOD USED CATERPILLAR G3516C 1475KW NATURAL GAS GENERATOR SET GENERATOR SET TYPE: RENTAL GRADE ENGINE MODEL: G3516C FUEL TYPE: NATURAL GAS VOLTAGE: 277/480 MODEL: XQ1475G PANEL: WITH AUTOSTART AND SAFETY SHUTDOWNS BATTERIES: YES HOURS: 7262 SINCE NEW FREQUENCY: 60 CYCLES/Hz PHASE: THREE PHASE QUANTITY: 4 Learn More

TT-1009 COMPLETE MALIWATT STITCH-BONDING PRODUCTION LINE, WORKING WIDTH 2800mm MALIWATT STITCH BONDING LINE BRAND: MALIWATT BONINO ALL ELECTRIC MOTORS ALL ELECTRIC CONTROL PANELS WITH INVERTERS RECENT ELECTRIC CONTROL PANEL OF THE CARDING MACHINE, WITH INVERTERS OF INLET UNITS, MAIN SWIFTS AND DOFFERS, BLACK-OUT FAIL-SAFE SYSTEM PROCESSED FIBERS: FROM 1.5 TO 15 DTEX PRODUCT WEIGHTS: FROM 70 TO 350/400 GSM QUANTITY: 1 SET Learn More

REFERENCE NUMBER: M-4558 (1111185AP10RC) L DORNIER HTVS 4/S RAPIER LOOMS YEAR 1997 WIDTH 2000mm DORNIER RAPIER LOOMS TYPE HTVS 4/S YEAR 1997 WIDTH 2000mm NOMINAL WIDTH 2000mm 8 WEFT COLORS MAXIMUM CAPACITY AT-1 CONTROL PANEL ELECTRONIC STAUBLI DOBBY 2671 – 20 SHAFT CAPACITY – 16 TO 20 SHAFTS INSTALLED ECT – ELECTRONIC TAKE UP, EWL – ELECTRONIC WARP LET-OFF, ECS – ELECTRONIC COLOR SELECTOR QUANTITY AVAILABLE: 20 Learn More

T-7018 LINE FOR PRODUCING 70 TO 150 DENIER FROM RECYCLED BOTTLES EXTRUDER Φ 160/25 PRODUCT TYPE PET-POY END/POSITION 12 ENDS POSITIONS 24 POSITIONS POSITION/SPINNING BEAM 2 POSITIONS/SPINNING BEAM POSITION DISTANCE (mm) 1500mm SPINNING PACK CYLINDER TYPE, BOTTOM MOUNTED SPINNERET DIAMETER (mm) Φ 90mm CROSS BLOWING AREA 1430mm X 1380mm GEAR PUMP SPECIFICATIONS (CC/REV) 12X3.0CC/REV GEAR PUMP QUANTITY/POSITION 1 OIL PUMP SPECIFICATION (CC/REV) 12X0.12CC/REV OIL PUMP QUANTITY/ POSITION 1 DOWTHERM BOILER/LINE 600L/65KW GUIDE ROLLER SYSTEM (DIAMETER X WIDTH) 160mm X 160mm MIGRATION JET AWA. JAPAN WINDER TWA1800-12ENDS Learn More

REFERENCE NUMBER: M-5218 (131321LCJM12RX) L LORIS BELLINI HANKS DYEING MACHINES AND ALEA HANKS DRYER YEAR 1994-2001 (2) X LORIS BELLINI HANKS DYEING MACHINES IN PARALLEL MODEL APPC-LV 250 YEAR 2001 CAPACITY 300 + 300 KGS, 4 + 4 EXTRACTABLE BASKETS WITH 5 TROLLEYS, DOUBLE SET OF STICKS 336 + 336 OF 1040mm, HEAD 55mm, 2 INTRODUCTION CANS, 2 PREPARATION CANS, ELECTRIC PANEL, PLC LORIS BELLINI (1) X LORIS BELLINI HANKS DYEING MACHINE MODEL APPC-LV 125 YEAR 2001 CAPACITY 150 KGS, 2 EXTRACTABLE BASKETS WITH 2 TROLLEYS, DOUBLE SET OF STICKS 168 OF 1040mm, HEAD 55mm, 1 INTRODUCTION CAN, 1 PREPARATION CAN, ELECTRIC PANEL, PLC LORIS BELLINI (1) X LORIS BELLINI HANKS DYEING MACHINE MODEL APPC-LV 25 YEAR 2001 CAPACITY 30 KGS, 2 EXTRACTABLE BASKETS WITH 2 TROLLEYS, DOUBLE SET OF STICKS 36 OF 1040mm, HEAD 55mm, 1 INTRODUCTION CAN, 1 PREPARATION CAN (1) X ALEA HANKS DRYER MODEL MNBC/81 YEAR 1994 COMPOSED OF: INPUT, SQUEEZER, DRYING ROOM N.1, HANKS TURNING SYSTEM BETWEEN THE 2 DRYING ROOMS, EXIT, ELECTRIC PANEL – USABLE FOR STICKS 1030 TO 1040mm MACHINES SOLD TOGETHER QUANTITY: 5 Learn More

TT-8151 AUTO FOAM GENERATOR, YEAR 2023 1. AUTO FOAM GENERATOR 2. YEAR 2023 3. AUTO FOAM UNIT 200Mm DIAMETER MIXING HEAD SHAFT DRIVEN BY 4.0 KWATT, 960 RPM, 3 PHASE, AC MOTOR, 3½ TO 1 REDUCTION REQUIRED, BY PULLEY/BELT OR BY GEARBOX. QUANTITY: 1 Learn More