Search results for: 'Process+o'

YY-3584 CBD/HEMP OIL EXTRACTION INTRODUCTION THE CONTENT OF CBD OIL IN ALL PARTS OF HEMP ,USUALLY DECREASES ACCORDING TO THE ORDER OF BRACTS, FLOWERS, LEAVES, FINE STEMS AND THICK STEMS, AND THE CONTENT OF CBD IN THE FLOWERS AND LEAVES OF FEMALE FLOWERS IS THE HIGHEST, SO THE FLOWERS AND LEAVES ARE USUALLY SELECTED TO EXTRACT CBD OIL. OUR DEVELOPED HEMP OIL EXTRACTOR MACHINE (CENTRIFUGE MACHINE) IS ADAPT THE NEW TECHNOLOGY CAN TO MAKE THE EXTRACTOR TIME SHORT AND EFFICIENT EXTRACTION .THE EXTRACTOR MACHINE (CENTRIFUGE MACHINE) HAVE THE JACKET WHICH CAN KEEP THE INSIDE ETHANOL SOLUTION WITH HEMP RAW MATERIAL IN LOW TEMPERATURE. QUANTITY: 1 Learn More

M-6064 NONWOVEN NEEDLE FELT PUNCH PRODUCTION LINE, WIDTH 3000mm TO 5500mm, YEAR 2000

OFFER 001
NONWOVEN NEEDLE FELT LINE
NEEDLE PUNCH PRODUCTION LINE
FINAL FABRIC WIDTH: MAXIMUM 5500mm
YEAR: END OF 2000
BONDING: MECHANICAL (NEEDLING)
CAPACITY: ± 960 KG/H FOR A 250 G/M2 PRODUCT ON 4M WIDTH

OFFER 002
TEMAFA FIBRE OPENING SYSTEM
BALE OPENER

OFFER 003
SPINNBAU CARD FEEDING UNIT

OFFER 004
SPINNBAU ONE CARDING MACHINE
WORKING WIDTH: 3000mm

OFFER 005
AUTEFA CROSSLAPPER
WORKING WIDTH: 3000mm
LAYERING WIDTH: 6500mm

OFFER 006
DILO DI-LOOM OD-II 60 NEEDLE LOOM

OFFER 007
OUG-II 60 NEEDLE LOOM

OFFER 008
ONE ACCUMULATOR

OFFER 009
ONE WINDING AND CUTTING DEVICE

OFFER 010
ONE TEMAFA WEB EGE OPENING

OFFER 011
ALL SUCTION EQUIPMENT

OFFER 012
FULL CONTROL DESK & CONTROL CABINETS

OFFER 013
ONE PROCESS CONTROL SYSTEM

QUANTITY: 1 LINE

Learn More

YY-2892 FANGBANG (CHINESE) PAPER BAG MAKING MACHINE MAKE: FANGBANG (CHINESE) THIS MACHINE CAN PRODUCE PAPER BAGS OF WIDE-RANGE SIZES. IT CAN PRODUCE NOT ONLY SMALL-SIZE FOOD BAGS, BUT ALSO BIG-SIZE SHOPPING BAGS. THIS MACHINE CAN MAKE VARIOUS KINDS OF PAPER BAGS HAVING DIFFERENT BOTTOM STYLES. THIS MACHINE IS DESIGNED TO MANUFACTURE SQUARE BOTTOM PAPER BAGS WITHOUT HANDLES FROM PAPER ROLL, AND IT IS AN IDEAL EQUIPMENT FOR PRODUCING PRODUCING VARIOUS SIZED PAPER BAGS FAST. BY IMPLEMENTING STEPS INCLUDING PAPER FEEDING, TUBE FORMING, TUBE CUTTING AND BOTTOM FORMING INLINE, THIS MACHINE CAN EFFECTIVELY SAVE LABOR COSTS. THE EQUIPPED PHOTOELECTRIC DETECTOR CAN CORRECT CUTTING LENGTH, SO AS TO ENSURE CUTTING PRECISION. THE EQUIPPED SIEMENS PLC SYSTEM ENSURES THAT THE MACHINE CAN PERFORM QUICKLY AND STABLY. THIS MACHINE CAN PROCESS VERY THIN PAPER, AS WELL AS PRODUCE PAPER BAGS VERY FAST, THUS THIS MACHINE IS ESPECIALLY SUITABLE FOR BEING APPLIED IN FOOD INDUSTRIES. QUANTITY: 1 Learn More

TT-1887 CUTLASS HK5 OSCILLATING FOAM CUTTING MACHINE, SIZE 118” X 86” X 51”, YEAR 2016 MODEL HK5 TECHNICAL SPECIFICATIONS POWER REQUIREMENT: 220VOLT - 3 PHASE MECHANICAL DIMENSIONS: 248” X 126” X 90” MACHINE WEIGHT: 6,200 LBS. MAXIMUM FOAM SIZE: 118” X 86” X 51” BLADE SIZE: .120” X.020” PROCESSING SPEED: 0~248”/MIN CUTTING ACCURACY: ±.020 SERVO SYSTEM: 2400 TO 2800 RPM PC OPERATING SYSTEM: WINDOWS RESULTS MAY VARY IN RELATION TO MATERIAL AND CUT DESIGN *CE COMPLIANT Learn More

V-2042 WATER RECIRCULATION SYSTEM FOR WATERJETS 6 LITERS PER MINUTE MAXIMUM JET HEAD USES 1 TO 2 LITERS PER MINUTE FILTRATION: FROM 5 TO 10 MICRONS Learn More

YY-2229 PP PE FILMS AGGLOMERATOR, VOLUME 500L AGGLOMERATOR IS USED FOR PROCESS A WASTE OF THERMOPLASTIC FILM WITH A THICKNESS OF LESS THAN 2 MILLIMETERS; PRODUCTS WHICH CAN BE SOFT PVC, HDPE, LDP, LLDPE (HIGH OR LOW PRESSURE POLYETHYLENE), PS (POLYSTYRENE), PP (POLYPROPYLENE) AND OTHER THERMOPLASTICS WASTE PRODUCTS, AND ALSO FOR EPS (EXPANDED POLYSTYRENE) WASTE PRODUCTS GRANULATED. QUANTITY: 1 Learn More

TT-1316 NONWOVEN MIDDLE SPEED NEEDLE LOOM, WORKING WIDTH 3200mm MACHINE STRUCTURE FEATURES: 1. SPLICING TYPE STRUCTURE, IT IS MADE BY HIGH QUALITY Q235 STEEL PLATE WELDING, THEN FINE TEMPERING QUALITATIVELY WITH SUFFICIENT COMPLETENESS AND STABILITY. UPPER AND DOWN MACHINE GIRDERS BOTH PRECISELY PROCESSING MACHINED. 2. ECCENTRIC BEARINGS ADOPT TORRINGTON FAMOUS BRAND 3. MAIN SHAFT IS USING 42CROMO MATERIAL. AFTER CONDITIONING TREATMENT FINE FINISHING AND GRINDING. 4. NEEDLE GIRDER HIGH SPEED TURBINE ELECTRIC LIFTING, STRIPPER PLATE TURBINE ELECTRIC LIFTING, NEEDLE GIRDER ROLLER SCALE DISPLAY. AIR LOCKED THE NEEDLE PLATE TIGHTLY. 5. NEEDLE PLATE LUOYANG MADE BY MAGNESIUM ALLOY DIE CASTING PLATE COMPOSITE PU, RADON ARRANGE NEEDLES HOLE φ1.82mm 6. INPUT PVC LATTICE, OUTPUT ROLLER ADOPTS φ155mm, HIGH QUALITY SEAMLESS STEEL PIPE, AFTER FINISHING GRINDING, THE SURFACE IS PLATED WITH HARD CHROME, UPPER ROLLER ADJUSTABLE HEIGHT AIR CYLINDER. 7. MAIN MOTOR, OUTPUT ROLLER ALL FREQUENCY CONTROL. 8. INSTALLED POWER: AROUND 15.5KW, MAIN MOTOR 11 KW. QUANTITY: 1 SET Learn More

YY-1845 PET SINGLE BEAM SPUNBONDED NONWOVENS PRODUCTION LINE GENERAL DESCRIPTION: WIDTH OF PRODUCT: 3.2M; WEIGHT RANGE: 15 TO 170G/M2; PRODUCTION CAPACITY: 556KG/H (BASED ON PRODUCT WITH BASIS WEIGHT OF 50G/M2 OR ABOVE, AND WITH WIDTH OF 3.2M AND FABRIC DELIVERING SPEED OF 58M/MIN). THE DESIGNED ANNUAL CAPACITY IS 4000 TONS PET SPUNBONDED NONWOVEN FABRICS (OUTPUT CALCULATION IS BASED ON THE PRODUCT WITH BASIS WEIGHT OF 50G/M2 AND WITH WIDTH OF 3.2M AND 8000 WORKING HOURS ANNUALLY AND AT FABRIC CONVEYING SPEED OF 58M/MIN, AND THE EFFICIENCY OF 95%). PROCESS SPEED: 10M/MIN TO 150M/MIN; FIBER FINENESS: 1.0 TO 3.0 DPF; MACHINERY DIMENSIONS (L×W×H): 25M×18M×10.5M (FOR REFERENCE ONLY AND DEPENDS ON THE ACTUAL DESIGN). TOTAL INSTALLED POWER: 1492KW (ACTUAL POWER CONSUMPTION: APPROXIMATELY 746KW). Learn More

Z-1613 AUTOMATIC CARTON PACKAGING MACHINE CARTONING FORM: HORIZONTAL CARTONING CARTONING SPEED: 30 TO 40 BOXES PER MINUTE (DEPENDING ON CARTON DIMENSIONS) PROCESS REQUIREMENTS: -AUTOMATIC BOX OPENING, CARTONING -GLUE SPRAYING -BOX SEALING VOLTAGE: 220 VOLTS, 60Hz PLC MICRO COMPUTER FULL AUTOMATIC CONTROL MAN-MACHINE INTERFACE OPERATION SYSTEM (HMI), AUTOMATICALLY DISPLAYS THE PACKING SPEED, QUANTITY, FAULT REASON AND OTHER PERFORMANCE PARAMETERS. THE INDENTATION OF THE CARTON IS GENERALLY: 0.4mm DEEP QUANTITY: 1 Learn More

ABLE TO DO ROLLING TESTS ON MATTRESSES

DURABILITY TEST FOR THE BED SURFACE:
1. USES INDEPENDENT CONTROL SYSTEM. PLC CONTROL SEPARATELY. COOPERATE WITH COLOR TOUCH SCREEN. IT IS
CONVENIENT AND VISUAL TO OPERATE. THE TESTING PROCESS AND THE RUNNING STATUS BE CLEAR TO US, TEST TIMES CAN
BE SET FREELY.
2. SPECIAL LIFT DEVICE IS CONVENIENT TO LIFT UP THE HEAVY ROLLER AND EASY TO MOVE IT TO THE TEST AREA OF THE
MATTRESS. THEN PUT DOWN THE ROLLER AND MAKE ITS OWN WEIGHT FULLY LOAD TO THE SURFACE OF THE MATTRESS.
3.ROLLER CAN MOVE UP AND DOWN IN THE TESTING PROCESS, TO ADAPT TO CONCAVE AND CONVEX SURFACE OF THE
MATTRESS.
4. WHEN DOING DURABILITY TEST OF EDGE, ROLLER CAN BE MOVED TO THE “PARKING” AREA BEHIND THE INSTRUMENT.
5. DURABILITY TEST FOR THE EDGE IS DRIVEN BY SERVO MOTOR; IT IS QUIET, STEADY AND RELIABLE TO OPERATE.
6. INCORPORATES ADVANCED PHOTOELECTRIC SENSE TECHNOLOGY. THE BEGINNING POSITION OF THE CENTER LINE OF THE
CUSHION SURFACE RETURN TO THE HOME POSITION AUTOMATICALLY.
DURABILITY TEST FOR BED EDGE :
ADOPT INDEPENDENT CONTROL SYSTEM, USING DEDICATED HIGH-PRECISION AND HIGH INTELLIGENT ARAM CONTROLLER
AND SPECIAL TEST SOFTWARE. IT CAN RUN UNDER WINDOWS SYSTEM ON PC, IT IS OPERATED ALL BY SOFTWARE, THE
INTERFACE OF SOFTWARE IS EASY TO OPERATE.
SPECIAL TEST SOFTWARE ON PC, WINDOWS OPERATING PAGE, A HIGH DEGREE OF COMPATIBILITY.
TEST PROGRAM HAS ALREADY BEEN SET ON THE SOFTWARE ON PC ACCORDING TO THE TEST REQUIREMENT. A KEY TO TEST.
IT IS CONVENIENT FOR OPERATOR TO LEARN AND SAVE THE TRAINING TIME.
THE CURVE WINDOW OF TEST SOFTWARE DISPLAY THE VALUES OF FORCE AND SHIFT IN REAL TIME, COORDINATE MODEL.
LOADING CUSHION ON THE EDGE AND LOADING CUSHION WHICH IS USED FOR MEASURING USE GENERIC CONNECTION
HEAD THAT CAN BE IN INTERCHANGED. SHARING A SET OF DRIVING DEVICE, SAVE SPACE AND COST.
ADJUSTABLE RACK. THE PRESSURE PLATE CAN BE ADJUSTED THE POSITION ALONG THE DIRECTION OF X AND Y. IT CAN
MEASURE EACH POINT OF THE MATTRESS. IT IS DIFFERENT FROM THE TRADITION WAY TO SEPARATE. THE TEST CAN BE
FINISHED WITHOUT MOVING THE SAMPLE.
SAVE A LOT OF TESTING TIME, GREATLY REDUCES THE WORKING INTENSITY, OPERATORS CAN ACHIEVE SINGLE OPERATION,
SAVE THE COMPANY COST.
FORCE SENSOR AVOIDS DAMAGE TO THE CORE COMPONENTS BECAUSE IT CAN MAKE PROTECTION WHEN IT IS OVERLOAD.

ROLLING TEST SPEED: 16±2CYCLES PER MINUTE (OR SPECIFIED BY CUSTOMER)
CYLINDER ROLLER: 1400N, THE MIDDLE DIAMETER: 300mm, BOTH ENDS DIAMETER: 250mm, LENGTH: 1000
HEXAGON STYLE WOODEN ROLLER: SIZE AS STANDARD REQUIREMENT
COUNTER: 0~999999 CAN BE SET.
THE CONTROL WAY OF ROLLING: TOUCH SCREEN + PLC CONTROL
LOADING CUSHION ON THE EDGE: BUTTOCKS SHAPE, 380mm X 495mm
LOADING PARTS ON THE EDGE: THE MIDPOINT ON THE LONG EDGE OF THE MATTRESS.200 mm FROM EDGE.
LOADING FORCE ON THE EDGE: 1000N
LOADING TIME ON THE EDGE: 3S
POSITION OF MEASUREMENT: MATTRESS CENTER, LEFT AND RIGHT ARE BOTH 250mm, THE MIDPOINT ON THE LONG EDGE
OF THE MATTRESS 200 mm INWARD.
LOADING PLATE OF MEASUREMENT: DIAMETER 355mm, RADIUS OF CURVATURE OF THE END R800mm
CAPACITY OF FORCE SENSOR: 2KN
LOADING SPEED OF MEASUREMENT: 90±5mm/MIN
STROKE: 500mm
DRIVE MOTOR: SERVO MOTOR

Learn More