Search results for: 'link'

T-1652 SGT 400 GAS TURBINE, 50Hz, YEAR 2017, 11 KV, 12.9 MW SGT 400 GAS TURBINE TYPE: STANDARD BRAND: SIEMENS CATEGORY: ENGINES/GENERATORS/MOTORS/TRANSMISSIONS SUBCATEGORY: TURBINE IN STOCK: YES CONDITION: EXCELLENT TYPE: UNUSED SGT-400 GAS TURBINE GENERATOR SET, WITH INTEGRAL LOCAL EQUIPMENT ROOM: UNIT(S) TO BE SUPPLIED ARE UNUSED, WITH ZERO RUNNING HOURS, NEVER INSTALLED THESE UNITS HAVE BEEN STORED INDOORS SINCE MANUFACTURE. QUANTITY: 2 Learn More

T-8646 SUPERBA YARN STEAMING AND SHRINKING MACHINE, YEAR 1995 LINKED WITH 1 GILBOS WINDER IDS-10: WINDING MACHINE 12 SPINDLES, 10” TRAVERSES, CYLINDRICAL TUBES 280mm METER COUNTER, AUTOMATIC DOFFER, CONVEYOR FOR FULL CONES 380V / 3PH / 50Hz VERY GOOD CONDITION, STILL IN WORKING POSITION QUANTITY: 1 Learn More

TT-1336 MENEGATTO COVERING MACHINES FOR DOUBLE COVERING OF BARE RUBBER OR SPANDEX, YEAR 2003 TO 2006 ITEM 001 MODEL: 1500/2003-NG, YEAR 2003 QUANTITY: 3 SETS ITEM 002 MODEL: 1500/2003-NG, YEAR 2006 QUANTITY: 2 SETS COVERING MACHINES FOR DOUBLE COVERING OF BARE RUBBER OR SPANDEX. ITEM 003 MODEL: HPV, YEAR 2003 BOBBIN WINDER PREPARED FOR SPOOLS 5 ½ X 92 HOLE 30mm -36 SPINDLES WARRANTY: EXCLUDED INSTALLATION: EXCLUDED Learn More

TT-1527 JACOB MULLER NF 53 NARROW FABRIC LOOMS, YEAR 2004 TO 2006 WORKING WIDTH: MAXIMUM 27mm TAPE 8 TAPES (EACH MACHINE COME OUT FROM EACH MACHINE) ACTUAL TAPE CAN PRODUCE IS +- 25mm BASED 8/27 QUANTITY: 4 Learn More

TT-1538 SUESSEN FIOMAX B -100 RINGS SPINNING MACHINES WITH 624 SPINDLES, YEAR 1995 TO 2000 CURRENTLY RUNNING CAN FIT IN A 40FT CONTAINER X 3 QUANTITY: 3 Learn More

TT-1335 S&S DRILLING RIG - NEVER USED, YEAR 2011 S&S DRILLING RIG DRILLING RIG (NEVER USED) YEAR 2011 HOURS: MINIMAL MILES: MINIMAL NEW SURPLUS UNIT - NEVER USED GENERAL RIG SPECIFICATIONS: HP RATING: 550HP AMBIENT RATING: 50-55⁰C POWERED BY: 1 X C15 CAT ENGINE (540 BHP @ 2,100 RPM) ALLISON 5610 TRANSMISSION RIG TYPE: SELF-PROPELLED, CARRIER MOUNTED, 6-AXLE (12X4), INTERNALLY GUYED QUANTITY: 1 Learn More

TT-1316 NONWOVEN MIDDLE SPEED NEEDLE LOOM, WORKING WIDTH 3200mm MACHINE STRUCTURE FEATURES: 1. SPLICING TYPE STRUCTURE, IT IS MADE BY HIGH QUALITY Q235 STEEL PLATE WELDING, THEN FINE TEMPERING QUALITATIVELY WITH SUFFICIENT COMPLETENESS AND STABILITY. UPPER AND DOWN MACHINE GIRDERS BOTH PRECISELY PROCESSING MACHINED. 2. ECCENTRIC BEARINGS ADOPT TORRINGTON FAMOUS BRAND 3. MAIN SHAFT IS USING 42CROMO MATERIAL. AFTER CONDITIONING TREATMENT FINE FINISHING AND GRINDING. 4. NEEDLE GIRDER HIGH SPEED TURBINE ELECTRIC LIFTING, STRIPPER PLATE TURBINE ELECTRIC LIFTING, NEEDLE GIRDER ROLLER SCALE DISPLAY. AIR LOCKED THE NEEDLE PLATE TIGHTLY. 5. NEEDLE PLATE LUOYANG MADE BY MAGNESIUM ALLOY DIE CASTING PLATE COMPOSITE PU, RADON ARRANGE NEEDLES HOLE φ1.82mm 6. INPUT PVC LATTICE, OUTPUT ROLLER ADOPTS φ155mm, HIGH QUALITY SEAMLESS STEEL PIPE, AFTER FINISHING GRINDING, THE SURFACE IS PLATED WITH HARD CHROME, UPPER ROLLER ADJUSTABLE HEIGHT AIR CYLINDER. 7. MAIN MOTOR, OUTPUT ROLLER ALL FREQUENCY CONTROL. 8. INSTALLED POWER: AROUND 15.5KW, MAIN MOTOR 11 KW. QUANTITY: 1 SET Learn More

T-9717 COLD PIN PERFORATING UNITS, WORKING WIDTH 1800mm, REFURBISHED COLD PIN PERFORATING UNITS REFURBISHED WORKING WIDTH 1800mm YEAR: UNKNOWN, ESTIMATED TO BE LATE 1990’s WORKS WITH PLASTIC FILM, FOIL OR PAPER AND SOME NONWOVENS COLD PIN PERFORATING UNIT CAN BE USED FOR PERFORATING OR EMBOSSING EASY TEAR LINES FOR BAGS PRODUCT EMBOSSING FOR GRIP OR IDENTIFICATION WEB DRIVEN UNIT DIMENSIONS: 23” (585mm) WIDE X 36” (915mm) TALL X 105” (2667mm) LONG NO PINNED TOOLING IS INCLUDED WITH THE UNIT HOWEVER, A WIDE RANGE OF PINNED TOOLING CAN BE USED WITH THIS UNIT TO CREATE AN ARRAY OF HOLE SIZES AND PATTERNS. QUANTITY: 2 Learn More

T-9875 COLD PIN PERFORATING UNIT, WORKING WIDTH 1100mm COLD PIN PERFORATING UNIT REFURBISHED WORKING WIDTH 1100mm WORKS WITH PLASTIC FILM, FOIL OR PAPER AND SOME NONWOVENS CAN BE USED FOR PERFORATING OR EMBOSSING PRODUCE MACHINE DIRECTION EASY TEAR LINES FOR BAGS PRODUCT EMBOSSING FOR GRIP OR IDENTIFICATION WEB DRIVEN UNIT DIMENSIONS: 21” (535mm) WIDE X 17” (432mm) TALL X 69” (1750mm) LONG NO PINNED TOOLING IS INCLUDED WITH THE UNIT, HOWEVER, A WIDE RANGE OF PINNED TOOLING CAN BE USED WITH THIS UNIT TO CREATE AN ARRAY OF HOLE SIZES AND PATTERNS QUANTITY: 2 Learn More

T-5978 DORNIER PTV/4S RAPIER WEAVING MACHINES, WIDTH 2100mm, YEAR 2001, DOBBY-REBUILT TO RUN POLYPROPYLENE MONOFILAMENT FABRIC · 20 NEW HARNESSES ADDED · ALL 20 UNDERCARRIAGES MOUNTED · DOBBIES COMPLETELY REBUILT · ALL NEW HEDDLES QUANTITY: 4 Learn More