Search results for: 'rolls ro'

TT-1199 TUFTCO AND CMC TUFTING MACHINES, YEAR 1989 TO 2001 ITEM 001 4000mm, 1/10TH GAUGE TUFTCO SERVO SCROLL DRIVE SYSTEM TUFTING MACHINE YEAR 2000 QUANTITY: 1 ITEM 002 4000mm, 1/8TH GAUGE CMC CUT PILE TUFTING MACHINE YEAR 1989 QUANTITY: 3 ITEM 003 4000mm, 1/10TH GAUGE, TUFTCO, SERVO SCROLL, LOOP TUFTING MACHINE YEAR 2003 QUANTITY: 4 ITEM 004 4000mm, 1/10TH GAUGE, TUFTCO ENHANCED LOOP GRAPHICS TUFTING MACHINE YEAR 1998 QUANTITY: 6 ITEM 005 4000mm, 1/10TH GAUGE TUFTCO ENHANCED LOOP TUFTING MACHINE WITH 6 ROLLS, SPLIT ROLLER RAINBOW ON FRONT SIDE, SPLIT ROLL LOOP YEAR 1998 QUANTITY: 8 ITEM 006 4000mm, 1/10TH GAUGE TUFTCO ENHANCED LOOP GRAPHICS TUFTING MACHINE WITH ELG DRIVE SYSTEM YEAR 2001 QUANTITY: 10 ITEM 007 4000mm, 1/10TH GAUGE TUFTCO ENHANCED LOOP GRAPHICS TUFTING MACHINE YEAR 1997 QUANTITY: 8 ITEM 008 4000mm, 1/10TH GAUGE TUFTCO ENHANCED LOOP GRAPHICS TUFTING MACHINE YEAR 1996 QUANTITY: 12 ITEM 009 4000mm, 1/10TH GAUGE TUFTCO ENHANCED LOOP GRAPHICS TUFTING MACHINE YEAR 1996 QUANTITY: 13 ITEM 010 4000mm, 5/64TH GAUGE TUFTCO ENHANCED LOOP GRAPHICS TUFTING MACHINE YEAR 1999 QUANTITY: 3 AVAILABLE IMMEDIATELY Learn More

TT-6773 A & F SLITTER REWINDER MODEL RC 2472, 130" 1. A & F SLITTER REWINDER MODEL RC 2472 2. 130" 3. A & F SHAFTLESS FLOOR PICK-UP UNWIND STAND FOR 72" DIAMETER ROLLS QUANTITY: 1 Learn More

TT-1259 UNITED CONVERTING S60-2 INDUSTRIAL ROLL LINE, WIDTH 106”, YEAR 2006 AVAILABILITY: IMMEDIATE INSPECTION: IN PRODUCTION QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6840 AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE BRAND: AUTOMATEX, SPINNBAU NEEDLE PUNCH LINE CONSISTING OF: BLEND LINE, 60” WIDE, 4 HOPPERS WITH 12 HEAVY DUTY EXTENDED APRONS & NEW ELECTRONIC WEIGHING SYSTEM (2016). ALL MACHINES COMPLETELY RECONDITIONED IN 2016. OMMI STACK RESERVE, AUTOMATIC COMBO 332, YEAR 2000 SPINNBAU CARD, 2500mm, DOUBLE DOFFER, YEAR 1995, REPORTED ~1500 TO 1800 PPH CAPACITY DEPENDING UPON PRODUCT. AUTOMATEX FA/3000 TC CROSSLAPPER, YEAR 1997, AC DRIVES. BATT DRAFTER, 12 ROLLS. AUTOMATEX PR-100/T PRE-NEEDLER, 60mm STROKE, YEAR 1997 DRAFTER, 5 ROLLS. AUTOMATEX AG 154/TB NEEDLE LOOM, QUAD PUNCH, 50mm STROKE, YEAR 1997 FOUR ROLL STRETCH. METAL DETECTOR. ENTEX TENTER WITH VERTICAL IR HEAT BANKS, YEAR 1997 WINDER, YEAR 1997 PERKINS 4 ROLL CALENDER, NO STEEL ROLLS OR HEAT SYSTEM INCLUDED BUT MIGHT BE NEGOTIATED. EHHARDT+LEIMER GUIDER MODEL SE 11062, YEAR 2013 ENTEC WINDER, YEAR 1997 FINISHED WIDTH REPORTED OF 210" BUT COULD GO WIDER. LINE RAN PRIMARILY GEOTEXTILE & BEDDING PRODUCTS FROM 4.5 TO 10 OZ/YD. QUANTITY: 1 Learn More

TT-3529 RIETER COTTON COMBED SPINNING PLANT WITH 26,112 SPINDLES, YEAR 2008 TO 2016 Learn More

YY-2227 USED KUSTER PAD BATCH DYEING PLANT, WORKING WIDTH 2000mm USED CPB-DYEING PLANT ACCORDING TO TYPE 222.11 QUANTITY: 1 CONSISTING OF 2-BOWL DYEING PADDER MAKE: EDUARD KUSTERS TYPE: 222.11 YEAR: COMPL. REFURBISHED BEFORE DELIVERY TECHNICAL DATA: WORKING WIDTH: 2000mm; ROLLER FACE WIDTH: 2200mm; DRIVE SIDE: RIGHT; SERVICE SIDE: LEFT; PRESSURE: 50 KP/CM; TOTAL PRESSURE: 10 TO / 100 NM; SPEED: 60 M/MIN; POWER: 5.5KW; VOLTAGE: 3 X 400 V, 50Hz; AIR CONNECTION: 6 BARS LOCALLY; COLOR OF PAINT: ACCORDING TO AGREEMENT. Learn More

REFERENCE NUMBER: J-4363 AUTOMATIC PET PAD MAKING MACHINE, 200 PADS PER MINUTE FOR PRODUCTS 450 TO 1500mm, COTTON CORE BETWEEN 400 TO 1000mm TOUCH SCREEN WITH ADJUSTABLE PRODUCT REQUIREMENTS IN 450 TO 600mm, COTTON CORE IN 400 TO 550mm PRODUCT STRUCTURE: SURFACE LAYER, BACKING PAPER, COTTON CORE, SAP, BASEMENT MEMBRANE STABLE PRODUCTION SPEED: 120 METERS PER MINUTE IF THE SIZE OF THE FINISHED PRODUCT IS 600 x 600mm, THE MACHINE RUNNING SPEED IS 200 PIECES PER MINUTE (8 HOUR OUTPUT IS 96,000 PIECES) MACHINE DIMENSIONS: 16000 x 2200 x 2600mm (LENGTH x WIDTH x HEIGHT) POWER SUPPLY: 380 VOLTS, 50 Hz TOTAL POWER: ABOUT 80 KW (NOT INCLUDING GLUE) PRESSURE: 1100 LITERS PER MINUTE, 6 TO 8 BARS YIELD: 98% OR GREATER (EXCLUDING ERRORS DUE TO GLUE MACHINE, MATERIAL EXCHANGE AND JOINTS CAUSED BY DEFECTIVE GOODS) QUANTITY: 1 Learn More

REFERENCE NUMBER: P-4325

WET WIPES PRODUCTION LINE

 

Model L40

Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface: 10" LCD touch screen
Cutting: synchronous flail knife
Packing style: end seal & reciprocating type(connecting 2 packing machine need explain)
Unwinding structure: 40 sets, 40 electronic eyes detect online(16 sets big rolls material) 
Auto splicing: film automatic splicing, label automatic switching                      
Frequency division detection: nonwoven, film, label detect  respectively
Frequency division pulling: 2 sets dry wipes pulling , 2 sets wet wipes pulling
Auto splicing: film automatic splicing, label automatic switching
Frequency division detection: nonwoven ,film, label detect respectively
Metal detect: online metal detector
Inferior eliminate: aluminizing paste connector rejected online
Flow control: 2.5-4 times, flow meter control, no liquid recovery
Moisture type: 40 fluid pipes spray independently
SUS Agitate tank: 2 sets, 1000L stainless steel agitate tank
Liquid level control: electronic detection, auto control
 
Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W220mm, φ1400mm, max W1050mm, φ1000mm
Axis QTY settings:40 rolls raw materials (auto splicing type 32 rolls)
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Axis QTY settings: 2 sets film, automatic splicing without stopping machine
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label
Label size: max W100mm  φ400mm
Axis QTY settings: 2 sets label, automatic switching without stopping(can be set as safety label)
Diameter of ventilating shaft: 3"
Folding  type: single extraction & interfold type
Wet wipes size:L120-220mm  W90-110mm
Open size: L120-220mm W150-220mm
Package size: L150-350mm W80-120mm H10-80mm
Design speed: 60bags/min &250cutting/min
Production speed: 50 bags/min &200 cutting/min
Machine space: L31000mm W2500mm H2100mm. L32600mm W3600mm H2100mm(auto splicing machine)
Power: AC 380V 50/60Hz 22KW(auto splicing machine:25KW)
Compressed air: 0.6-0.8Mpa 400L/min
Machine net weight :22000kg(auto splicing machine 25000Kg)

Option equipment: Coding machine Big roll material automatic splicing

 

QUANTITY: 1

Learn More

C-3707 TEKMA/GDM - ADULT DIAPERS PRODUCTION LINE IFP-AD, YEAR 1997

TEKMA/GDM
ADULT DIAPERS PRODUCTION LINE
MODEL: IFP-AD
YEAR: 1997

QUANTITY: 1

Learn More

BABCOCK / ARTOS PAD STEAM DENIM FOR OVER DYEING AND SODING YEAR 1988. WIDTH 2000mm. THE LINE IS COMPOSED OF: - INTRODUCTION SECTION WITH FABRIC ACCUMULATOR FOR ROLLS CHANGING WITHOUT INTERRUPTION OF WORKING; 01 BRUSHING DEVICE - INTRODUCTION SECTION WITHFABRIC ACCUMULATOR FOR ROLLS CHANGING WITHOUT INTERRUPTION OF WORKING; 01- KUSTERS DYEING PADDER 3 CYLINDERS 01- STEAMER 250 METERS CAPACITY 03- WASHING /DYEING TANKS 01 DYEING TANK 01- STEAMER 150 METERS CAPACITY 03- WASHING / DYEING TANKS, CLOSED WASHING SECTIONS FOR DOUBLE PASSAGE OF FABRIC WITH PNEUMATIC SQUEEZING DEVICE; 36- DRUMS DRYING SECTION; FABRIC EXIT ON THE ROLLER WITH MAXIMUM ROLL'S DIAMETER 2000mm, WITH FABRIC ACCUMULATOR FOR ROLLS CHANGING WITHOUT INTERRUPTION OF THE PROCESS Learn More