Search results for: 'Machine+fe'

J-4932 DIVERSIFIED SYSTEMS PERFORATOR, SLITTER, REWINDER 200 INCHES WIDE ENTRY DIAMETER: 48 INCHES EXIT DIAMETER: CAN BE 2 INCHES, UP TO 48 INCHES WITH CROSS PERFORATOR 24 LENGTHWISE BLADES QUANTITY: 1 Learn More

REFERENCE NUMBER: M-5300 (131342BVGT12UF) L UNDER PAD PRODUCTION LINE UNDER PAD PRODUCTION LINE MODEL: 100CD PRODUCTS TO BE PRODUCED: 3 SIZES OF DISPOSABLE UNDER PAD (SIZE: 600x900mm, 600x600mm, 600x400mm) MECHANICAL DRIVING SYSTEM WITH INVERTER CONTROL PRODUCT STRUCTURE: FLUFF +SAP; TOP TISSUE; BOTTOM TISSUE; TOP SHEET; BACK SHEET QUANTITY AVAILABLE: 1 Learn More

J-4941 AUTOMATED INDUSTRIAL MACHINERY AFM 2 DG WIRE BENDING MACHINE MAKE: AIM (AUTOMATED INDUSTRIAL MACHINERY) MODEL: AFM 2 DG (ACCUFORM MODULAR 2DX) TILTING TABLE SINGLE STAGE BENDING HEAD OPTIONS: P8 F1 WE SERIAL NUMBER: C 3 F0701 2009 WIRING DIAGRAM: AFM 2D6 – P8WEF1 – 490 – V8 – 3 VOLTAGE: 460 VOLTS FREQUENCY: 50 / 60 Hz FULL LOAD: 40 KVA LARGEST LOAD: 9 KVA DIMENSIONS OF THE STAINLESS STEEL TABLE: WIDTH 15 FEET 1 INCH x LENGTH 10 FEET 5 inches LOWER STAINLESS STEEL TABLE EXPENSION DIMENSIONS: WIDTH 8 FEET x LENGTH 37.5 INCHES QUANTITY: 1 Learn More

TT-2363 LION AUTOMATIC BLOWER, NOZZLES 2, YEAR 2011 QUANTITY: 1 Learn More

YY-2251 AIRLAID PRODUCTION LINE, FINAL PRODUCT WIDTH 2200mm ITEM 001 BALE OPENER (2 SETS) AND SEALED BALE OPENER (1 SET) ITEM 002 FIBER OPENING MACHINE (FOR LOW MELT FIBER OR PP) - 1 SET ITEM 003 PRE-OPENER – 1 SET ITEM 004 BIG CHAMBER BLENDER – 1 SET ITEM 005 MAIN-OPENER – 1 SET ITEM 006 VIBRATING FEEDER – 1 SET ITEM 007 CONDENSER – 2 SETS ITEM 008 AUTO-LEVER - 1 SET ITEM 009 AIR LAID MACHINE – 1 SET ITEM 010 AUTO-LEVER – 1 SET ITEM 011 BATT FEEDER – 1 SET ITEM 012 HIGH SPEED SINGLE SHAFT SINGLE BOARD PRE NEEDLE LOOM – 1 SET ITEM 013 HIGH SPEED SINGLE SHAFT SINGLE BOARD MAIN NEEDLE LOOM – 1 SET ITEM 014 DOUBLE BELT THERMAL-BONDED OVEN – 1 SET ITEM 015 DOUBLE-ROLLER CALENDER MACHINE – 1 SET ITEM 016 COOLING UNIT – 1 SET Learn More

TT-1199 TUFTCO AND CMC TUFTING MACHINES, YEAR 1989 TO 2001 ITEM 001 4000mm, 1/10TH GAUGE TUFTCO SERVO SCROLL DRIVE SYSTEM TUFTING MACHINE YEAR 2000 QUANTITY: 1 ITEM 002 4000mm, 1/8TH GAUGE CMC CUT PILE TUFTING MACHINE YEAR 1989 QUANTITY: 3 ITEM 003 4000mm, 1/10TH GAUGE, TUFTCO, SERVO SCROLL, LOOP TUFTING MACHINE YEAR 2003 QUANTITY: 4 ITEM 004 4000mm, 1/10TH GAUGE, TUFTCO ENHANCED LOOP GRAPHICS TUFTING MACHINE YEAR 1998 QUANTITY: 6 ITEM 005 4000mm, 1/10TH GAUGE TUFTCO ENHANCED LOOP TUFTING MACHINE WITH 6 ROLLS, SPLIT ROLLER RAINBOW ON FRONT SIDE, SPLIT ROLL LOOP YEAR 1998 QUANTITY: 8 ITEM 006 4000mm, 1/10TH GAUGE TUFTCO ENHANCED LOOP GRAPHICS TUFTING MACHINE WITH ELG DRIVE SYSTEM YEAR 2001 QUANTITY: 10 ITEM 007 4000mm, 1/10TH GAUGE TUFTCO ENHANCED LOOP GRAPHICS TUFTING MACHINE YEAR 1997 QUANTITY: 8 ITEM 008 4000mm, 1/10TH GAUGE TUFTCO ENHANCED LOOP GRAPHICS TUFTING MACHINE YEAR 1996 QUANTITY: 12 ITEM 009 4000mm, 1/10TH GAUGE TUFTCO ENHANCED LOOP GRAPHICS TUFTING MACHINE YEAR 1996 QUANTITY: 13 ITEM 010 4000mm, 5/64TH GAUGE TUFTCO ENHANCED LOOP GRAPHICS TUFTING MACHINE YEAR 1999 QUANTITY: 3 AVAILABLE IMMEDIATELY Learn More

V-2068 WRINKLE TYPE BANDAGE ROLLS PRODUCTION LINE INCLUDING PREFOLDING, BANDAGE DRYING, FOLDING, AND ROLLING MACHINERY (PRODUCT IS LIKE KENDALL “KERLIX”) THIS LINE INCLUDES PREFOLDING MACHINE, BANDAGE DRYING MACHINE, FOLDING MACHINE, AND WINDING MACHINE. FINAL PRODUCT IS 6 PLY USES 4 OUTPUT LINES, OUTPUT IS APPROXIMATELY 48 PIECES PER MINUTE FINAL WIDTH OF FABRIC: USUALLY CUSTOMERS USE 780mm WIDTH, MACHINE CAN BE MADE ACCORDING TO DIFFERENT REQUESTS MACHINE TOTAL LENGTH: 19 METERS (62.3 FEET) TOTAL QUANTITY: 1 COMPLETE PRODUCTION LINE Learn More

T-8543 4 SIDE SEALING WET WIPES MACHINE, STABLE SPEED 60 TO 120 BAGS PER MINUTE 4 SIDE SEALING WET WIPES MACHINE DRIVE MODE: AUTOMATIC STABLE SPEED: 60 TO 120 BAGS PER MINUTE MACHINE SIZE (L X W X H): 3000mm × 2500mm × 1800mm QUANTITY: 1 Learn More

TT-8626 HDB DOUBLE DOFFER NONWOVEN CARD, 2500mm 1. HDB DOUBLE DOFFER NONWOVEN CARD 2. 2500mm 3. RE-CONDITIONED 4. NEW TOWER FEED QUANTITY: 1 Learn More

REFERENCE NUMBER: M-3504 (880EASDHH7) K WORSTED SPINNING PLANT - 1 x COGNETEX GILL MODEL SCE.11.VA, BOBBINS/CANS FEEDING, ELECTRONIC AUTOLEVELLER, DELIVERY 1 SLIVER IN 1 CAN DIA. 700 x 1000 mm. - 1 X COGNETEX MODEL SC.400 PREPARATION LINE, YEAR 1993, COMPOSED BY: - 1ST GILL MODEL SCE.11.VA, CANS FEEDING, ELECTRONIC AUTOLEVELLER, DELIVERY 1 SLIVER IN 1 CAN DIA. 1000 x 1200 mm. - 2ND GILL MODEL SC.22.V, CANS FEEDING, DELIVERY 2 SLIVERS IN 1 CAN DIA. 1000 x 1200 mm. - 3RD GILL MODEL SC.24.V, CANS FEEDING, DELIVERY 4 SLIVERS IN 2 CANS DIA. 1000 x 1200 mm - 1 x SANT'ANDREA VERTICAL FINISHER MODEL RF2B, YEAR 1993, 24 HEADS, TUBES OF 300 mm. - 1 x COGNETEX FRAMES MODEL FTC8L, YEAR 1992, 736 SPINDLES, RING DIA. 55 mm., PK.1601, INVERTER, MANUAL DOFFING, MAGITEX BLOWER - 2 x COGNETEX FRAMES MODEL FTC8L, YEAR 1992, 736 SPINDLES EACH, RING DIA. 55 mm., PK.1601, INVERTER, AUTODOFFING, MAGITEX BLOWER - 3 x ZINSER FRAMES MODEL 319SL, YEAR 1/1983 + 1/1986 + 1/1988, 812 SPINDLES EACH, RING DIA. 54 mm., PK.1601, INVERTER, AUTODOFFING, MAGITESX BLOWER sold - 2 x ZINSER FRAMES MODEL 319SL, YEAR 1/1983 + 1/1986, 736 SPINDLES EACH, RING DIA. 54 mm., PK.1601, AUTODOFFING, MAGITEX BLOWER sold - 1 x ZINSER FRAME MODEL 421E, YEAR 1992, 736 SPINDLES, RING DIA. 54 mm., PK.1601, AUTODOFFING, MAGITEX BLOWER - 2 x SAVIO WINDERS MODEL ESPERO.E, YEAR 1996, 36 HEADS EACH, AUTOLOADING, AUTODOFFING, NO WAXERS, MESDAN SPLICERS, LOEPFE MODEL TK.740 CLEARERS, DELIVERY 6”, MAGITEX BLOWER - 3 x SAVIO WINDERS MODEL ESPERO.E, YEAR 1999, 48 HEADS EACH, AUTOLOADING, AUTODOFFING, NO WAXERS,MESDAN SPLICERS, LOEPFE MODEL TK.840 CLEARERS, DELIVERY 6”, MAGITEX BLOWER - 1 x RITE DOUBLING MACHINE MODEL ARD/L, YEAR 2000, 40 POSITIONS, SINGLE SIDE, AUTODOFFING, COUPLING TILL TO 6 ENDS, EXTERNAL CREEL, ELECTRONIC STOP MOTION, DELIVERY 8”, ELECTROJET BLOWER - 3 x VOLKMAN SAURER 2X1 TWISTERS MODEL VTS.07, YEAR 2000, 144 POSITIONS EACH, INVERTER, VULCOJET PNEUMATIC THREADING, FEEDING 8”, DELIVERY 6”, CONICITY 4°20’, ELECTROJET BLOWER. - 4 x VOLKMANN 2X1 TWISTERS MODEL VTS.07, YEAR 1/1987 + 1/1988 + 2/1992, 144 POSITIONS EACH, VULCOJET PNEUMATIC THREADING, FEEDING 2X6”, DELIVERY 6”, CONICITY 4°20’, ELECTROJET BLOWER. - 1 x VOLKMANN 2X1 TWISTER MODEL VTS.07, YEAR 1992, 160 POSITIONS, VULCOJET PNEUMATIC THREADING, FEEDING 2X6”, DELIVERY 6”, CONICITY 4°20’, ELECTROJET BLOWER. - 1 x VOLKMANN 2X1 TWISTER MODEL VTS.07, YEAR 1993, 168 POSITIONS, VULCOJET PNEUMATIC THREADING, FEEDING 2X6”, DELIVERY 6”, CONICITY 4°20’, ELECTROJET BLOWER. - 1 x MOTOCONO HIGH BULKING MACHINES MODEL HBI, YEAR 2000, 32 HEADS, FEEDING 6”, BULKING BY INDIVIDUAL END, ELECTROJET BLOWER, LINKED WITH MOTOCONO WINDER MODEL LDA, YEAR 2000 - 1 x MOTOCONO HIGH BULKING MACHINES MODEL HBI, YEAR 2000, 32 HEADS, FEEDING 6”, BULKING BY INDIVIDUAL END, ELECTROJET BLOWER, LINKED WITH MOTOCONO WINDER MODEL L/CF, YEAR 2004 - 1 x MOTOCONO HIGH BULKING MACHINES MODEL HBI, YEAR 2004, 32 HEADS, FEEDING 6”, BULKING BY INDIVIDUAL END, ELECTROJET BLOWER, LINKED WITH MOTOCONO WINDER MODEL LDA, YEAR 2003 - 2 x ATLAS COPCO AIR COMPRESSOR MODEL GA.37, YEAR 1/1996 + 1/2001, 7,5 HP (FOR WORKING WITH WINDERS) ALL THE PLANT IS RUNNING 380V – 50 HZ, TRIPHASE ALL ACCESSORIES AS TUBES, CANS, CONES ARE INCLUDED QUANTITY AVAILABLE: 1 Learn More