Search results for: 'loop loop'

COMPOSED OF

SEMI-AUTOMATIC MASK PRODUCTION MACHINE
MASK DIMENSIONS: 17.5 x 9.5mm
CAPACITY: 80 TO 100 PIECES PER MINUTE
3 LAYERS
WITH ULTRASONIC SEALING
MATERIAL: POLYPROPYLENE FABRIC
TOTAL POWER CONSUMPTION: 3 KW
POWER SUPPLY: 220 VOLTS, 50 OR 60 Hz
DIMENSIONS: 3300mm x 630mm x 1850mm
QUANTITY: 1

EAR LOOP ULTRASONIC WELDING MACHINES
QUANTITY: 4

MASK PACKING MACHINE
QUANTITY: 1

PRODUCES FLAT MASKS AUTOMATICALLY: COILS STOCK, FOLDS AND PRESSES, MOLDS MASK, CUTS, LOADS AND WELDS EAR LOOPS, FINISHED PRODUCTS EXIT THE MACHINE
MASKS ARE COMFORTABLE, NO PRESSURE, EASY TO WEAR AND PROVIDE GOOD FILTRATION
LINE FEATURES
ULTRASONIC WELDING MACHINE
HIGH SPEED PRODUCTION: 120,000 TO 140,000 PIECES PER 24-HOUR DAY
-APPROXIMATELY 90 TO 110 PIECES PER MINUTE
MODULAR AND PERSONNEL-FRIENDLY DESIGN WITH EASY MAINTENANCE
AUTOMATIC STOP AND ALARM FEATURE FOR MATERIAL BREAKAGE AND OTHER EXCEPTIONS, WITH ON-SCREEN HELP FOR CORRECTING THE BREAKAGE/EXCEPTIONS
DIMENSIONS: 6500mm LENGTH x 2500mm WIDTH x 1950mm HEIGHT
WEIGHT: </= 5000 KG
POWER: 220 VOLTS +/- 5% , 50 Hz, GROUND PROTECTION (OR AS PER CUSTOMER)
TOTAL KW: APPROXIMATELY 8.8 KW
AIR: 0.4 TO 0.6 MP (CLEAN AIR AFTER DEWATER, OIL-LESS, FILTRATION AND PRESSURE)
MAIN ACCESSORY: AIRTAC AIR CYLINDER

QUANTITY: 1 COMPLETE LINE (2 SETS CURRENTLY AVAILABLE MARCH 17TH)

REFERENCE NUMBER: J-2326
QUILTER FOR RAGS, 12 INCH WIDTH – NEW – RAG QUILTER

QUILTING MACHINE FOR RAGS
SEWS RAGS CONTINUOUSLY
SEW HEAD: 7 NEEDLES AND 7 LOOPERS 
MAKES A CHAIN STITCH ON THE CONVEYED RAGS
USES OVERLOCK THREAD
DISTANCE BETWEEN NEEDLES: 250mm (ENSURES THAT EVEN SMALL RAGS ARE SEWN)
1 HP MOTOR, 3-PHASE, 220 VOLT
WITH FREQUENCY INVERTER TO ADJUST THE ROTATION SPEED OF THE MOTOR AS NEEDED
HEIGHT: 1800mm
WIDTH: 960mm
DEPTH; 370mm
CONVEYOR WIDTH: 200mm
CONVEYOR LENGTH: 1560mm
MACHINE TOTAL LENGTH WITH CONVEYOR: 2800mm

AFTER SEWING, THE QUILT IS TRANSPORTED OUT INTO ROLLS WHICH CAN BE CUT ACCORDING TO CUSTOMER NEEDS
OPERATION: PLACE A LARGER RAG AS THE BOTTOM LAYER, SMALLER RAGS AS FILLING, AND ANOTHER LARGER RAG AS THE TOP LAYER. OPERATION REQUIRES 2 TO 3 OPERATORS.
TO REDUCE THE NUMBER OF OPERATORS REQUIRED, A FIBER ROLL AS CAN BE USED AS THE LOWER LAYER. THIS ALSO INCREASES THE PRODUCTION RATE.
DAILY PRODUCTION: VARIES BETWEEN 300 TO 500 KG PER 8 HOURS OF OPERATION
FOR KNIT FABRICS SUCH AS COTTON, VISCOSE, SWEATSHIRT FLEECE, NYLON STRETCH-FABRIC, PIQUET AND POPELINE
THERE IS NO MATERIAL WASTE AS THE MACHINE USES 100% OF THE RAGS
WORKING WIDTH: 12 INCHES
NEEDLE SPACING: 1 INCH
WITH LOOPER STRUCTURE SIMILAR TO THE DIAGRAM BELOW (REDUCES BOTTOM THREAD BREAKAGE)
MACHINE IS NEW, MADE TO ORDER
LEAD TIME: 10 DAYS

REFERENCE NUMBER: L-2590 
POLYETHYLENE FOAM SHEET PRODUCTION LINE
MODEL 120-EPE 1100 TO 2000mm THICKNESS 8mm

REFERENCE NUMBER: L-1502
MODEL: UE2410
QUANTITY: 1

J-0135 GRIBETZ INTERNATIONAL DG 3200 110” 360° COMPUTERIZED DOUBLE THREAD CHAINSTITCH QUILTER

GRIBETZ
BUILT IN 1990
CLASS III
3 NEEDLE BAR 1x3x6
(12”) 300mm CARRIAGE TRAVEL
WIDTH: 110”

MACHINE SUPPLIED WITH FOLLOWING FEATURES:
3*3” FEED ROLLERS
2 THREAD RACKS FOR TOP THREAD AND LOOPER THREAD
2 SPECIAL BUTTERFLY THREAD TAKE-UP ASSEMBLIES FOR TOP AND BOTTOM THREAD
2 AUXILIARY FEED ROLL BRACKETS
3 PUSH BUTTON STATIONS
6 ECCENTRICS
1 YARDAGE COUNTER
120 NEEDLES
120 LOOPERS
40 STANDARD PATTERNS
EQUI-STITCH

SPECIAL EQUIPMENT:
CATWALK WITH MATERIAL HANDLING PACK
ELECTRONIC THREAD BREAK DETECTOR
BACK CANOPY WITH MOTORIZED WIND-UP

QUANTITY: 1

A-1910 COMPLETE PLANT FOR DYEING BOBBINS, HIGH TEMPERATURE, LORIS BELLINI

(1) AUTOMATIC PREPARATION FOR CONES LORIS BELLINI, 2003 - PREPARATION OF CONES AND AUTOMATIC LOADING OF THE CONES ON THE EQUIPMENT LOOPS
(1) MINOX APPARATUS MODEL RPP/0-25, YEAR 1999 - LOAD 20KG - COMPLETE WITH TANK AND SAMPLER WITH 1 CONE
(2) HORIZONTAL APPARATUS LORIS BELLINI, YEAR 1988 - OPERATING AT PRESSURE OF 5 BAR AND AT TEMPERATURE 140°C - LOAD CAPACITY 500 BOBBINS APPROX KG.1000 EACH - PREPARATION TANK FOR WATER HEATING – POSSIBILITY TO WORK INDIVIDUALLY AND IN PARALLEL
(2) HORIZONTAL APPARATUS LORIS BELLINI, YEAR 1987 - OPERATING AT PRESSURE OF 5 BAR AND AT TEMPERATURE 140°C - LOAD CAPACITY 500 BOBBINS APPROX KG.1000 EACH - PREPARATION TANK FOR WATER HEATING - POSSIBILITY TO WORK INDIVIDUALLY AND IN PARALLEL
(1) DRYER CONDENSATION LORIS BELLINI
THE PLANT IS NOT SOLD SEPARATELY.

QUANTITY: 1

REFERENCE NUMBER: G-8608

MODEL N-32 COTTON FANCY YARN TWISTER

ITEM:: FANCY YARN TWISTER

MODEL: N-32

BASIC FUNCTION: SPINNING COTTON LOOP YARN, TT YARN, SLUB/KNOP YARN, 2 COLOR CHANGER FANCY YARN

SPECIFICATIONS: (AS PER ONE SET):

CONTROL: TOUCH SCREEN+ PLC

NUMBER OF SPINDLES: 12

RANGE OF COUNT: 1 TO 48Nm

RANGE OF FIBRE LENGTH: 22 TO 64 TO 102mm

RANGE OF DRAFT: APPROXIMATELY 2 TO 50

SPEED OF HOLLOW SPINDLE: 12000RPM

SPEED OF FALSE-TWISTER: 18000RPM

DRAFTING ROLLER: Φ28/28/28mm

FIBRE LENGTH RANGE: 22 TO 42mm

GROOVED DRUM: Φ82 X 105mm

POWER: 2.2KW

VOLTAGE220 AC  50HZ: 220/3 X 380V  AC  50HZ

EXTERNAL DIMENSIONS: 2500mm X 1000mm X 2200mm

REFERENCE NUMBER: K-3888

LABORATORY DOUBLE TWISTER

MACHINE: X-06 LABORATORY SOWN

NAME:TWISTER

MODEL: X-06

BASIC FUNCTION: IT IS USED FOR TWISTING SINGLE YARNS INTO COMPOUND YARN THROUGH RING SPINDLES

TECHNIQUE DATA:

CONTROL MODE: TOUCH SCREEN+ PLC

SPINDLE NUMBER: 12

TWISTING DEGREE: ABOUT 1200-2000T/m

OUTPUT: ABOUT 0.25KG TO 1 KG

SPEED OF LOOP SPINDLES: 20000RPM

ROLLER SIZE: Φ25mm/25mm/25mm

RING SIZE: Φ38mm TO 45mm

TOTAL POWER: ABOUT 850W  

VOLTAGE: 220V AC  50/60Hz

MACHINE DIMENSIONS: 1600mm×1200mm×1600mm

REFERENCE NUMBER: K-3939

LABORATORY COTTON YARN SPINNING MACHINE

SPINS PLIED YARN INTO FINE YARN THROUGH DRAFTING AND LOOP SPINNING

CONTROL:TOUCH SCREEN+ PLC

NO. OF SPINDLES-:4/6/8/12

TWISTING DEGREE:ABOUT 200-2000 TIMES/METER

DRAFTING RANGE:ABOUT 2-50

FIBER LENGTH:22mm TO 42mm

OUTPUT ABOUT 0.25KG-1KG

SPINDLE SPEED:12000 RPM

ROLLER SIZE:Φ25/25/25mm

RING SIZE: Φ38-45 mm

TOTAL POWER: 550W

VOLTAGE-220/3×380V AC  50/60Hz

MACHINE DIMENSIONS: 1000mm×800mm×1600mm

QUANTITY: 1