Search results for: 'processing+and'

TT-2734 STEIN THERMOFIN MODEL TFF 4019 CONTINUOUS FRYER, WIDTH 42 INCHES, GAS FIRED STEIN THERMOFIN MODEL TFF 4019 FRYER INDIRECT NATURAL GAS FIRED ALL STAINLESS STEEL USED CONTINUOUS IN STOCK IN AS-IS CONDITION AVAILABLE FOR IMMEDIATE SHIPMENT QUANTITY: 1 Learn More

YY-2526 FRYER, BELT, 48" X 35', TEMPCO, GAS-FIRED DETAILS: STAINLESS STEEL CONTINUOUS BELT FRYERS, MANUFACTURED BY TEMPCO, BELT MEASURES 48” WIDE X 35’ LONG, STAINLESS STEEL CONSTRUCTION WITH WIRE BELT (APPROX. 1/2" SPACING), BELT IS DRIVEN BY APPROXIMATELY 1 HP TOP MOUNTED DRIVE. INCLUDES TOP HOLD DOWN BELT AND CURRENTLY SET UP FOR APPROXIMATELY 4” CLEARANCE. FRYING SYSTEM INCLUDES REMOVABLE TOP COVER THAT IS CONTROLLED BY (2) OVERHEAD 1-TON HOISTS. OFFERED WITH GAS-FIRED HEATING SYSTEM WITH BURNER AND FAN TO HEAT COOKING OIL FED FROM OUTSIDE TANKS. FRIED PRODUCT DISCHARGES TO STAINLESS-STEEL BELT CONVEYOR, TO COOLING CONVEYOR. OFFERED WITH STAINLESS STEEL HOT OIL TANK AND PAPER FILTER TO REMOVE SOLIDS FROM OIL. FRYING SYSTEM OFFERED WITH CONTROLS. QUANTITY: 1 Learn More

TT-1738 HUMMEL LNG CLEAN POWER GENERATING BARGE, 7.5MW, 50 TO 60 Hz, YEAR 2014 THE POWER BARGE WAS ORIGINALLY DEVELOPED TO ENABLE VISITING CRUISE VESSELS TO POWER DOWN MAIN ENGINES IN PORT, REDUCING FUEL USE AND POLLUTION, WHILST RETAINING FULL ELECTRICAL POWER TO ON BOARD SYSTEMS. THE BARGE IS CAPABLE OF GENERATING A TOTAL OF 7.5 MW OF POWER FROM 5 SILENT GENERATORS FED BY TWO 17T LNG CONTAINERS. THE VESSEL IS A FLOATING POWER PLANT PROVIDING CLEAN AND EFFICIENT COLD IRONING POWER TO CRUISE HARBOURS, TERMINALS AND LOCAL INFRASTRUCTURE CURRENTLY. IT CAN ACT AS A BACKUP POWER BANK TO THE LOCAL ELECTRIC AND POWER GRID, ALSO POTENTIALLY PROVIDING HEATED WATER TO LOCAL SYSTEMS. THE POWER BARGE IS CAPABLE OF GENERATING A TOTAL OF 7.5 MW OF POWER FROM 5 SILENT GENERATORS FED BY TWO 17T LNG CONTAINERS. QUANTITY: 1 Learn More

T-9989 TRUTZCHLER - TOYOTA - MURATA COMPLETE 37000 SPINDLE RING SPINNING PLANT, YEAR 2018 WITH THE TOP OF THE LINE UP TRUTZSCHLER BACK PROCESS, TOYOTA RING FRAME AND MURATEC QPRO LINK CORNER Learn More

J-2125 COMPUTERIZED CHAIN-STITCH MULTI-NEEDLE QUILTING MACHINE & PANEL CUTTER (NEW) -WIDTH 2450mm QUILTING MACHINE QUILTING WIDTH: 2450mm QUANTITY: 1 PANEL CUTTER SPEED: 10 METERS PER MINUTE POWER: 3.2 KW AIR PRESSURE: 0.4 TO 0.8 Mpa VOLTAGE: 380 V / 50 Hz, 220 V / 60 Hz, 3-PHASE DIMENSIONS: 3500 x 1150 x 2300 (L x W x H mm) WEIGHT: 1150 KG QUANTITY: 1 Learn More

REFERENCE NUMBER: G-7566 TRUTZSCHLER WASTE RECOVERY PLANT YEAR 2004 TRUTZSCHLER & LTG SUBJECT TO PRIOR SALE: ALL MACHINES MADE IN YEAR 2004. EXCELLENT CONDITION. PLANT IS DESIGNED FOR PROCESSING OF COTTON WASTE FROM MILLS OR COTTON GINNING MOTES, CLEANING CAPACITY UP TO 80%, WITH A SUCTION CAPACITY OF 1500 KG / HOUR. QUANTITY AVAILABLE: 1 Learn More

MACHINE MODE: F -4-D ESPECIALLY SUITED FOR FILLING QUILTS DIMENSIONS: 700 x 600 x 1400mm POWER: 1.6KW FILLING RANGE: 1 TO 100 GRAMS, DEPENDING ON THE MATERIAL ACCURACY: O TO 3 GRAMS DEPENDING ON THE OPERATION WEIGHING AND FILLING WITH ONLY ONE MACHINE, IN ONLY ONE OPERATION, RELIABLE AND PRECISE. EASY AND FAULTLESS OPERATION BY PROGRAMMING, YOU CAN SET FILLING WEIGHT AND SAVE UP TO 20 RECIPES LOW NOISE, USES A SPECIAL FAN FOR GENTLE FEATHER PROCESSING TRANSPORTATION AT EXTREMELY HIGH PERFORMANCE. VARIABLE FILLING SPEED, QUICK-START AND QUICK-BRAKE OF THE FAN BY USE OF A FREQUENCY INVERTER. FOOT-SWITCH OPERATED, AUTOMATIC FINISH OF THE FILLING CYCLE Learn More

TT-5803 COGENERATION PLANT, 3.2 MW, YEAR 2009 COGENERATION PLANT 3.2 MW USED QUANTITY: 1 Learn More

TT-3472 NEEDLE PUNCHING FELT MACHINE SIMILAR DESIGN AS DILO NEEDLE PUNCHING MACHINE, WORKING WIDTH: 2000mm TO 9000mm MANUFACTURER: DILO NON WOVEN CONDITION: NEW MIN. ORDER: 1 PIECE APPLICATION: CARDING FIBER AUTOMATIC GRADE: AUTOMATIC QUANTITY: 1 Learn More

T-9895 FULLY AUTOMATIC MATTRESS (PET PAD) MAKING MACHINE, 120 TO 150 PIECES PER MINUTE TECHNICAL PARAMETERS FUNCTION: EMBOSSING, CUTTING, FOLDING OF PET PAD FOLDING METHOD: 1/3 IN THE WIDTH DIRECTION, 2 TIMES IN THE LENGTH DIRECTION RAW MATERIAL WIDTH: HYDROPHILIC CLOTH WIDTH ≦ 600mm (SLIGHTLY SMALLER THAN THE WIDTH OF THE CAST FILM) WATER ABSORPTION LAYER WIDTH = HYDROPHILIC CLOTH WIDTH: 50 TO 60mm CAST FILM WIDTH ≦ 600mm PRODUCT UNFOLDED SIZE: 400 X 600mm; 500 X 700mm; 600 X 900mm FOLDED SIZE: 135 X 200mm; 170 X 250mm; 200 X 300mm SPEED: 120 TO 150 PIECES PER MINUTE FINISHED PRODUCT LENGTH: LENGTH ERROR ≦ 5mm THE POSITION OF THE ABSORBENT LAYER: THE SAME LENGTH AS THE HYDROPHILIC CLOTH AND CAST FILM WATER-ABSORBING LAMINATED PATTERN: DIAMOND PATTERN (CUSTOMIZABLE) NUMBER OF FOLDING LAYERS: 3 LAYERS EACH FOLD WIDTH: 135 TO 200mm APPLICABLE RAW MATERIALS: HYDROPHILIC NON-WOVEN FABRIC ABOUT 20 GSM WATER ABSORPTION LAYER 0.5 TO 3mm CAST FILM ABOUT 25 GSM SSS SPUNBOND WEIGHT: 13 TO 15 GSM THE INNER DIAMETER OF THE RAW MATERIAL CORE: 3 INCHES (75mm) RAW MATERIAL DIAMETER: NON-WOVEN FABRIC ≦ 700mm WATER ABSORPTION LAYER ≦ 1200mm CAST FILM ≦ 400mm MACHINE SIZE (L X W X H) MACHINE: 15000 X 2000 X 1700mm VOLTAGE: 380V/50Hz POWER: 12KW (WITHOUT WOOD PULP SECTION) NET WEIGHT: 6T AIR COMPRESSOR: ≥ 0.6MPA 1.2m³/MINUTE, 15KW (CUSTOMER FURNISHES) NONWOVEN ROLL MAXIMUM DIAMETER: 650mm FILM ROLL DIAMETER: 450mm REQUIRES 2 40 FOOT HQ CONTAINERS Learn More