Search results for: 'vertical+m'

REFERENCE NUMBER: G-0929 FOAM PROFILE CUTTING MACHINE FOR DOUBLE MATTRESSES WORKING CUTTING WIDTH: 1800mm WORKING CUTTING LENGTH: 2100mm MAXIMUM HEIGHT FROM TABLE TO BLADE: 0/250mm LOADING TABLE: 2200 X 1980mm VERTICAL STROKE OF THE PRESS-CONVEYOR: 0/250mm PASSAGE BETWEEN OUTPUT ROLLER AND TABLE: 25/540mm MAXIMUM HEIGHT OF FOAM TO BE WORKED: 220mm MAXIMUM MATTRESS DIMENSION: 1960 X 2100mm TABLE SPEED: 0-20 M/MIN POWER KW: 15 WEIGHT APPROXIMATELY: 4900 KGS QUANTITY AVAILABLE: 1 Learn More

MACHINE EQUIPPED WITH : - INLET BY PLATFORM + WEFTSTRAIGHTNER + DOGAL CYLINDER - WORKING WIDTH 2400mm - PINS WITH ANTIDEPINNING CLIPS VERTICAL CHAINS - FULL ACCESSORIED TO WORK OPEN KNITTING FABRICS - 6 METERS LONG OVEN HEATED BY GAS BURNERS - OVERFEEDING AT INLET - STEAMING TUNNEL ON INLET FIELD - COOLING AREA AT EXIT FIELD - FOLDER AND SMALL ROLL AT EXIT Learn More

TT-6961 UNITECH RED EVO 7 STENTER, WORKING WIDTH 2400mm, YEAR 2017 1. UNITECH RED EVO 7 STENTER 2. YEAR OF CONSTRUCTION: 2017 3. CHAMBERS: 6 4. MAX. WORKING WIDTH: 2400mm 5. HEATING SYSTEM: GAS 6. CHAIN TYPE: PIN CHAIN VERTICAL 7. ELECTRICAL TENSION: 3 X 380 V 50 Hz QUANTITY: 1 Learn More

TT-4438 GALLUS / KO-PACK / FRANCHINI LABEL MACHINES, WIDTH 170mm TO 250mm, YEAR 1979 TO 1992 ITEM 001 GALLUS R160 B02 LABEL LETTERPRESS PRINTING MACHINE YEAR 1986 OVERHAULED ON 1998 QUANTITY: 1 ITEM 002 KO-PACK 250 LABEL LETTERPRESS PRINTING MACHINE YEAR 1979 OVERHAULED ON 1996 QUANTITY: 1 ITEM 003 FRANCHINI F330 LABEL MACHINE YEAR 1992 QUANTITY: 1 Learn More

T-9594 MANUAL CROCKMETER RUBBING FASTNESS TESTER KEY SPECIFICATION: RUBBING HEAD DIAMETER: 16mm VERTICAL PRESSURE: 9N±0.2N RUBBING HEAD TRACK: 104±3mm DIMENSIONS: 660 X 160mm X 215mm (L X W X H) WEIGHT: 6KG ACCESSORIES: STANDARDS ACCESSORIES 1BOX: RUBBING CLOTH 2PC: SANDPAPER 2PC: RINGS OPTIONAL ACCESSORIES: GRAY SCALE FOR STAINING Learn More

M-6037 MACKIE/LAROCHE/STUMMER AIRLAY LINE, WORKING WIDTH 1000mm TO 2400mm, YEAR 2004 TO 2008

OFFER 001
AIRLAY LINE
MANUFACTURER: MACKIE, LAROCHE, STUMMER
YEAR: 2004 TO 2008
WORKING WIDTH: 2400mm

CONSISTS OF:
OFFER 002
MACKIE HOPPERS FOR FIBER FEEDING

OFFER 003
TOWER FEED

OFFER 004
BLENDING BIN FOAM PANEL

OFFER 005
LAROCHE FINE OPENER

OFFER 006
STUMMER VERTICAL OPENER

OFFER 007
STUMMER AIR BLENDER

OFFER 008
LAROCHE AIRLAY HEAD

OFFER 009
THERMOBONDING OVEN

OFFER 010
SLITTING SYSTEM WITH 5 BLADES

OFFER 011
CROSS CUT HIGH SPEED BLADE CUTTING SYSTEM

OFFER 012
BATT PACKER (FOR PACKING BATTS INTO BAGS)

OFFER 013
RECLAIM OPENER

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: M-4085

CUTLAS HORIZONTAL & VERTICAL CNC CUTTER YEAR 2012 -OSCILLATING BLADES

 

CUTLAS CNC CUTTER

TYPE: CNC HK-5

HORIZONTAL & VERTICAL

MOTOR: 1 KW

WEIGHT: 3T

VOLTAGE: 10~1 W 50 HZ 380

AIR PRESSURE: 4-6

MFD: NANTONG HEALTH CARE MACHINE CO. LTD.

THIS MACHINE WORKED ABOUT 20 HOURS

Nesting software is in development

Uses Autocad 2002

 

THE BUN THAT CAN FIT ON THE MACHINE HAS THE MAXIMUM DIMENSIONS:

 

HEIGHT: 50" INCHES

WIDTH:  88" INCHES

LENGTH: 108" INCHES

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-1998-A BAUMER ISL YEAR 2003 80" BAUMER ISL SAW YEAR 2003 DIMENSIONS OF THE TABLE: 87.5” LONG AND 92” ON EACH SIDE OF THE FENCE MANUAL VERTICAL CUTTING MACHINE FOR THE CUTTING AND TRIMMING, RESPECTIVELY, OF BLOCK OR SHEET WARE FROM FLEXIBLE FOAMS THE TABLE IS MANUALLY MOVED, THE LATERAL STOP IS ADJUSTED BY MEANS OF A HAND WHEEL. QUANTITY AVAILABLE: 1 Learn More

PS-90P POCKET SPRING MACHINE COMPUTERIZED OPERATION SYSTEM REMOVABLE INDEPENDENT HEAT TREATMENT DEVICE CHANGEABLE VERTICAL SPRING TRANSFER STRUCTURE VARIOUS CUSTOMIZED ULTRASONIC WELDING SEAM LOW AND EASY MAINTENANCE, ECONOMICAL INVESTMENT PERFORMANCE: 48 SPRINGS/MIN SPRING TYPE: BARREL/CYLINDRICAL AIR CONSUMPTION: APPROXIMATELY 30M3/H AIR PRESSURE: 0.6 TO 0.7 MPA POWER CONSUMPTION IN TOTAL APPROXIMATELY 10KW VOLTAGE: 3AC, 380V – FREQUENCY: 50/60HZ POWER REQUIREMENTS: INPUT FUSE: 25A – CABLE SECTION: 4 X 10mm2 WORKING TEMPERATURE: +5°C +45°C WEIGHT APPROXIMATELY 1800KG NON-WOVEN FABRIC CONSUMPTION MATERIAL DATA FABRIC DENSITY: 45~90G/M2 FABRIC WIDTH: 450 TO 600mm INNER DIAMETER OF FABRIC ROLL MINIMUM 60mm OUTSIDE DIAMETER OF FABRIC ROLL MAXIMUM 600mm STEEL WIRE CONSUMPTION MATERIAL DATA WIRE GAUGE: 1.6 TO 2.2mm INNER DIAMETER OF WIRE ROLL MINIMUM 320mm OUTSIDE DIAMETER OF WIRE ROLL MAXIMUM 1000mm ACCEPTABLE WEIGHT OF WIRE ROLL MAXIMUM 800KG WORKING RANGE STANDARD OPTION 1 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø55~ Ø70 POCKET SPRING HEIGHT: 80~140 STANDARD OPTION 2 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø55~ Ø70 POCKET SPRING HEIGHT: 100~160 STANDARD OPTION 3 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø55~ Ø70 POCKET SPRING HEIGHT: 120~180 STANDARD OPTION 4 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø55~ Ø70 POCKET SPRING HEIGHT: 140~200 STANDARD OPTION 5 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 80~140 STANDARD OPTION 6 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 100~160 STANDARD OPTION 7 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 120~180 STANDARD OPTION 8 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 140~200 SPECIAL OPTION 1 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 200~240 SPECIAL OPTION 2 WIRE GAUGE: Ø1.6~ Ø2.2 SPRING WAIST DIAMETER: Ø60~ Ø75 POCKET SPRING HEIGHT: 240~260 Learn More

TT-2176 BRUCKNER HIGH-PERFORMANCE STENTER, WORKING WIDTH 1300 TO 4200mm, YEAR 2018 BRUCKNER HIGH-PERFORMANCE STENTER TYPE: POWER-FRAME SPLIT FLOW YEAR 2018 ROLLER WIDTH 4400mm WORKING WIDTH 1300 TO 4200mm SPEED 80 M/MIN MACHINE IS IN EXCELLENT CONDITION AND ONLY FEW RUNNING HOURS QUANTITY: 1 Learn More