Search results for: 'Contact i'

REFERENCE NUMBER: L-5861

AUTOMOTIVE TIRE CORD & INDUSTRIAL YARN TWISTING PLANT

 

PICANOL / GUNNE TIRE CORD LOOMS

 

QUANTITY: 1 PLANT

Learn More

REFERENCE NUMBER: R-9572

COMPLETE DANGER FLAT WAFER OVEN LINE, YEAR AROUND 1975-1980 (WITH HEBENSTREIT CREAM LINE)

 

COMPLETE FLAT WAFER LINE

CONSITING OF:

DANGER WM 52 FLAT WAFER OVEN

DANGER WM 36 FLAT WAFER OVEN

HEBENSTREIT WZ-EM WAFER SPREAD CREAM LINE

POSSIBLY WITH SUBSEQUENT COOLING CHANNEL

AND SIG SB HORICONTAL FLOW WRAPPER INCL

WAFER CUTTER TABLE

 

MACHINE IS OFFERED IN ‘AS IS’ CONDITION, WITHOUT WARRANTY

 

QUANTITY: 1

Learn More

 L-4786  WAUKESHA VHP7044GSI GENERATORS, 1200 RPM, 50 & 60 Hz

CAN OPERATE AT 1150 KW, 1200 RPM, 60 Hz, 600/480 VAC
OR
AT 1050 KW, 1000 RPM, 50 Hz, 400 VAC

WEATHER ENCLOSURE W/SKID
ENGINE DRIVEN RADIATOR ASSEMBLY

ENGINE CONTROLS & INTERFACE: WAUKESHA ENGINE ECU & AUXILIARY I/O BOX
KATO ALTERNATOR, 1200 KW / 1500 KVA, 6P6-3300, 6– POLES, 2 BEARING, 1200 RPM, 80 DEG C TEMP.
RISE (40 DEG. AMBIENT), IP-23 ENCLOSURE, PMG, CLASS 'H', 600/480 VOLT AC DUAL VOLTAGE, 3 PH,60HZ, 0.8 PF. FOUR (4) UNITS WITH
RENOLD COUPLING - 4 UNITS WITH MARATHON ALTERNATOR 480 VAC
ENGINE CONTROLS AND INTERFACE – ECU AND AUXILIARY I/O BOX  
50 GALLON OIL MAKE-UP SYSTEM WITH LEVEL INDICATION

Learn More

REFERENCE NUMBER: R-1390
OSTHOFF SINGEING/CORINO ENTRY & EXIT/PAREX & DESIZING RANGE, WORKING WIDTH 2000mm, YEAR 1995 - RECONDITIONED 2015
DETAILS:
BRAND:OSTHOFF
WORKING WIDTH: 2000mm
YEAR: 1995
FULLY RECONDITIONED IN YEAR: 2015

COMPRISING OF:

ITEM 001
CORINO DE- BATCH- J BOX & BRUSH
WORKING WIDTH: 2000mm
QUANTITY: 1

ITEM 002
OSTHOFF SINGEING MACHINE
TYPE: PK 90
MAXIMUM FABRIC WIDTH: 2000mm
MAXIMUM FLAME WIDTH: 2200mm
QUANTITY: 1

ITEM 003
GAS BURNERS WITH AUTO IGNITION ELECTRODES
WORKING WIDTH: 2000mm
QUANTITY: 2

ITEM 004
PAREX DESIZING WITH 2 BOWL PADDER
QUANTITY: 1

ITEM 005
ONE PAREX OPEN WIDTH DESIZING - WASHING TANK
WORKING WIDTH: 2000mm
QUANTITY: 1

Learn More

REFERENCE NUMBER: R-7764

SULZER TEXTIL P7300HP S540 N4 SP D12 R

YEAR: 2007

QUANTITY: 1

 

Learn More

P-5043 PROBAT (P5) ROASTER 5 KILOS YEAR 2009

PROBAT
MODEL: P5
ROASTER
YEAR: 2009
5 KILOS
NICE FULL CONTROL PANEL MOUNTED ON LEFT SIDE
AVERAGE 33 POUNDS PER HOUR. MAXIMUM 10 POUNDS PER BATCH
PROBAT HAS RETURNED TO THEIR CLASSIC, NOSTALGIC DESIGN CONTACT COMPONENTS MADE OF HIGH-QUALITY CAST IRON
SIMULTANEOUS ROASTING AND COOLING HAS JUST BEEN ADDED WITH SUCTION FOR COOLING AND ROASTING EXHAUST AIR
SEPARATE MOTORS FOR DRUM DRIVE, COOLING SIEVE STIRRING ARM AS WELL AS ROASTER AND COOLER FANS – NO MORE BELTS AND CHAINS, A GREAT IMPROVEMENT.
SIMPLIFIED CLEANING BY REMOVABLE LATERAL WALLS
SEPARATE ROASTING CYCLONE FOR AN EFFECTIVE CHAFF ASPIRATION WHICH CAN BE LOCATED IN DIFFERENT LOCATIONS AS NEEDED
CLEAR OPERATION WITH DIGITAL TIME AND TEMPERATURE DISPLAY
EMERGENCY DISCHARGE IN CASE OF POWER OUTAGE USING SUPPLIED CRANK. ADAPTER MAKES POSSIBLE THE USE OF A CORDLESS SCREWDRIVER
OPTIONAL (PROBATONE 5 / PROBATONE 12): PS NASED CONTROL SYSTEM WITH VISUALISATION OF PRODUCT TEMPERATURE CURVE AND RECIPE MEMORY

QUANTITY: 1

Learn More

R-3273 PROBAT GG90 ROASTER - 90 KILOS

MODEL: GG90 COFFEE ROASTER
ORIGINAL YEAR: 1956
HAS BEEN RECENTLY REFURBISHED WITH NEW CONTROLS
NEW PNEUMATICS
IT WILL HAVE A NEW GAS TRAIN
PLEASE CONFIRM IF YOU NEED MAINS OR LPG NOZZLES
IT COMES WITH LPG NOZZLES

ALL NEW ELECTRICS, CIRCUIT BREAKERS, CONTACTS, SWITCHES, ETC. THE OLD CONTROL BOX IS USED TO HOUSE THE NEW COMPONENTS WITH THE ORIGINAL BACK-LIT PICTURE INDICATORS FUNCTIONING. PNEUMATICS ARE ADDED FOR CHARGING, DRUM DOOR OPENING, CHANGEOVER VALVE ON COOLING PAN EXHAUST/VACUUM STONE REMOVER AND COOLING PAN EMPTYING. A SEPARATE MOTOR FOR THE FLU FAN HAS BEEN ADDED. A NEW STAINLESS CHAFF COLLECTOR WILL BE INCLUDED. THE PAINT IS VERY SOUND AND ORIGINAL WITH NO CRACKING. THE GUNMETAL FINISH ON OUTER DRUM AND COOLING PAN JUST NEEDS A BIT OF BUFFING. A PROFILING TEMPERATURE CONTROLLER WITH TIMER WILL BE INSTALLED.
CURRENTLY SET UP IN THE FACTORY AND IN GOOD CONDITION.

QUANTITY 1

Learn More

P-5090 JOPER CAST IRON ROASTER 60 KILOS

ONE BAG ROASTING – WORLDWIDE FAVORITE SINCE MOST OF THE COFFEE BAGS IN THE WORLD ARE 60 KILO. NOW THIS IS NOT AN EXCUSE TO AVOID SILO MANAGEMENT OF THE COFFEE BEANS - AS COFFEE STORED IN SILOS ENJOY A UNIVERSAL MOISTURE CONTENT WHERE LEAVING IT IN BAGS WILL GIVE YOU MOISTURE ALL OVER THE PLACE - SO THINK SILOS AS PART OF YOUR PLANT. NOW TO THE ACTUAL ROASTER BEING A VERY RUGGED CAST IRON ROASTING FRAME AND ROASTING DRUM CONTACT-CLEARANCES WITH THAT SOLID FRAME MAKING IT JUST PLAIN SOLID AND DOES NOT MOVE UNDER LONG OR EXTENDED USE. DOUBLE WALL DRUM MEANS THAT THE HEAT IS ALL DESIGNED TO GO THROUGH THE CENTER OF THE ROASTING CHAMBER, NOT "ONTO" THE DRUM EXTERIOR. TOTAL TRUE CONVECTION. NOT ONLY IS THIS THE SAME STYLE FROM THE OLD GOTHOT & BARTH ROASTER DAYS. . . BUT EVEN BETTER AS THE SHAFT DESIGN SO THAT BEARINGS ARE EXTERNALLY MOUNTED AND ADDITIONALLY ARE AIR COOLED FOR LONG LIFE AND TROUBLE-FREE CONTROL. EVEN THE SIDE PANELS OR PRODUCT FLIGHTS HAVE A LONGER CURVE POSITIONING THAT ALLOWS FOR MORE PRODUCT FLOW INTO THE HOT AIR STREAM, RESULTING IN A SLIGHTLY MORE RAPID ROAST WITH MORE EVEN BEAN INTERIOR AND EXPANSION THAT FRANKLY LEADS THE INDUSTRY.

ALL THIS COMMENTARY ABOVE MEANS THIS ROASTER SIMPLY IS MORE QUIET THAN ANYTHING ON THE MARKET. PERIOD. THERMAL INSULATION WITH HIGHEST QUALITY OF FIBER FOR LOW GAS CONSUMPTION; DIGITAL TEMPERATURE CONTROL. CYCLONE IS SEPARATE. THE COOLER, BEING TOTALLY SEPARATE ALSO HAS THE LARGEST AIR COLLECTION AREA OF ANY ROASTER MADE ALLOWING FOR TOTAL AMBIENT COOL COFFEE IN LESS THAN THREE MINUTES. ADD TO THIS PACKAGE A LOADER OR YOUR CHOICE OF DESTONERS AND EVEN YOUR CHOICE OF CONTROL METHODS. . . SEE BELOW FOR DETAILS. SPECIAL NOTE - THE MORE AUTOMATIC VERSIONS OF THIS ROASTER MEANS THAT EVERYTHING IS TOTALLY DIFFERENT FROM THE BURNER TO THE MOTORS USED TO CONTROL EACH FUNCTION - AS THEY ARE ALL SPEED CONTROLLED - SO THERE IS A HUGE DIFFERENCE BETWEEN THE "MANUAL" METHOD AND THE AUTOMATIC AND PROFILE OPERATED MACHINE.

SPACE PLANNING AND DRAWINGS - WE ARE HAPPY TO DRAW THIS INTO YOUR DRAWINGS, SO THAT YOU CAN SEE SPECIFICALLY JUST WHERE AND HOW THIS WILL FUNCTION WITHIN YOUR PLANT. PLEASE SEND YOUR DRAWINGS FOR A DETAIL STUDY.

BUILT TO UL295 STANDARDS.

QUANTITY: 1

Learn More

REFERENCE NUMBER: A-1876
END OF LINE UNIT T4.0 FOR NEEDLEPUNCHED PRODUCTS – 4000mm

PRODUCT TO BE PROCESSED: NEEDLEPUNCHED NONWOVENS
PRODUCT WIDTH: 4.000 MM

WORKING SPEED: 1 – 20 M/MIN

QUANTITY: 1

Learn More

INDEX 1. Technical specification pag.2 2. Line composition pag.3 3. Machines description pag.4 4. Total price of the turn-key plant pag.25 5. Sale terms pag.26 6. Payment terms pag.28 7. General selling terms and conditions pag.29 Learn More