Search results for: 'tensio'

REFERENCE NUMBER: M-3973 (99016AVEZ8RX)-D HOTMELT POWDER SCATTERING AND LAMINATING MACHINE-2200mm 1.LAMINATING LINE : MAKE : VILLARS (CH) ACTUALLY SANTEX YEAR: 1993 WORKING WIDTH : 2200mm (NOMINAL WIDTH 2M10) VOLTAGE: 3X380(400)V TOTAL POWER : 158KW RECOMMENDED MAX. SPEED 10M BUT 15M IS POSSIBLE ORIGINAL CONFIGURATION : INPUT UNIT (WITH POSSIBILITY TO HANG IN ROLLERS BY MEANS OF E.G. FLAT BEARINGS), POWDER SPREADER, INFRARED PREHEATING ZONE AND DOUBLE BAND LAMINATING PRESS (HEATING THROUGH IR) LATER EXTENSION (1997) : 2ND INFRARED ZONE WITH COLD WATER COOLED CALENDAR AT THE BACK EQUIPPED WITH SELVEDGE CUTTING SYSTEM WITH ADJUSTABLE INFRARED FOLLOW UP SYSTEM. STRENGTH OF INFRARED CAN BE ADJUSTED SO THAT E.G. THE UPPER SUBSTRATE CAN BE ‘NEGLECTED’. KNOWN PROBLEMS : 1)INFRARED PREHEATING ZONE : 2 IR STRIPS BROKEN 2)CERTAIN PARTS IR ZONES (MOSTLY EXTERIOR ZONES) OF THE DOUBLE BAND LAMINATING PRESS DO NOT LONGER FUNCTION, BUT SECOND PART OF THE MACHINE CAN STILL BE HEATED TILL 160 À 170°C AND EVEN MORE, BUT THEN AT VERY LOW SPEED 2.ACCUMULATOR WITH WINDER AND CONTROLLING SYSTEM : MAKE : MATTHIJS (ELECTRICAL PART BY ELECTRO VANDEVELDE) YEAR: 1999 OPERATING VOLTAGE : 3X380V CAPACITY ACCUMULATOR : +/- 50M UNIT FUNCTIONS INDEPENDENTLY FROM LAMINATING MACHINE AND SPEED VARIES FROM 0 TILL 50M (SPEED OF WINDING UP UNIT = SPEED LAMINATING MACHINE WHEN ACCUMULATOR IS EMPTY) 3. SUPERSTRUCTURE FOR SUPPLY SECOND SUBSTRATE : MAKE: MENZEL YEAR: 2000 OPERATING VOLTAGE : 3X380V FUNCTIONS INDEPENDENTLY FROM THE LAMINATING MACHINE. SPEED REGULATION BASED ON A 0-10V (=0-15M) EXIT SIGNAL OF THE LAMINATING MACHINE MANUAL RIGHT-LEFT GUIDANCE OF THE SUBSTRATE. A SECOND AUTOMATIC PRE-GUIDANCE IS FORESEEN, BUT THE MOTOR DOES NO LONGER FUNCTION AND IT IS IN PRACTICE NOT REQUIRED BECAUSE THE ROLLS ARE ALWAYS WINDED STRAIGHT. A MEASURING ROLLER IS INCLUDED TO MEASURE THE TENSION OF THE SUBSTRATE. THIS MEASURING ROLLER DIRECTS THE MOTOR SPEED SO THAT THE ADJUSTING OF THE TENSION STAYS STEADY. IT IS EVEN POSSIBLE TO GO TO A +/- TENSIONLESS SITUATION. THE LINE IS MOUNTED ON A SELF-MADE PLATFORM EQUIPPED WITH A SIMPLE UNWINDING UNIT KNOWN PROBLEM : PRESSURE ROLLER TO AVOID THAT THE SUBSTRATE “SLIDES” OVER THE BRAKE ROLLER IS WORN OUT, BUT IS IN PRAXIS NOT NEEDED. MOTOR OF THE PRE-GUIDANCE IS BROKEN (SEE ABOVE) 4.MISCELLANEOUS : SELF-BUILD ENTRY J-BOX WITH SIMPLE ROLL MEASUREMENT SEPARATE J-BOX FOR UNWINDING FROM DOCKS, SO THAT CAN BE LAMINATED IN THE POLE DIRECTION SEWING MACHINE MERROW TO MAKE FLAT SEAMS ON FINE/THIN FABRICS SELVEDGE CUTTERS ARE MOUNTED ON A SYSTEM SO THAT THE FABRIC CAN BE LEVELLED EASILY, EVENTUALLY CAN BE WINDED ON DOCKS. INCLUDING 2 DOCKS OF 2M30 OF WHICH 1 WITH FLAP BEARINGS Learn More

REFERENCE NUMBER: M-4754 (1111DJQSXX10) L SCHLAFHORST AUTOCONER YEAR 2004-2005, 60 DRUM POSITIONS AUTO CONER NO. 4 M/C NAME: SCHLAFHORST - 338 AUTO CONER NO. 5 M/C NAME: SCHLAFHORST - 338 QUANTITY AVAILABLE: 2 Learn More

P7300 SULZER LOOM WIDTH 3300mm (130") WORKS FROM CREEL (NO WARP BEAMS) INCLUDES SPECIAL WARP DELIVERY UNITS INTEGRATED IN THE LOOM 2 COLORS CAM MOTION YEAR 2005 LOOM WERE WEAVING CONVEYOR FABRIC WITH 500 AND 1000 DENIER YARN AVAILABLE FOR EACH LOOM: -CLOTH TENSION WHILE MACHINE RUNNING, CLOTH TENSION WHILE MACHINE STOPPED, CLOTH TAKE UP SPEED -CREEL WITH 3456 POSITIONS; CREEL HELD 5 AND 10 KGS BOBBINS -TWO CENTRAL TUCK IN UNITS 40mm SELVAGE; ULTRASONIC CUTTERS FOR THE EDGES -TWO WEFT FEEDERS ROJ HD10 ONE AUTOMATIC BATCHER (CLOTH WINDER) CREEL RECEIVED CONES EITHETR 5 OR 10 KGS THE 5 KGS BOBBINS HAVE A DIAMETER OF 250mm THE HORIZONTAL GAUGE OF THE CREEL IS 265mm TO PLACE THE 10 KG BOBBINS YOU SKIP ONE POSITION THEY USED POLYESTER HIGH TENACITY FROM KOSA AND INVISTA THE CREEL COMES IN MODULES OF 1152 POSITIONS AND YOU CAN HAVE A CREEL OF 2304 OR 3456 POSITIONS THE CREEL COMES FURTHER DIVIDED IN SECTIONS OF 288 POSITIONS , ONE 1152 MODULE HAS 4 X 288 SECTIONS Learn More

TT-8601 BENNINGER SLASHER INDIGO LINE, YEAR 2003 RECONDITIONED 2021 1. BENNINGER SLASHER INDIGO LINE 2. YEAR: 2003 RECONDITIONED 2021 3. RUNNING AT THE MOMENT IN PERFECT CONDITION Learn More

TT-8599 VAMATEX LEONARDO RAPIER LOOM, WORKING WIDTH 1700mm, YEAR 2001, DOBBY 1. VAMATEX RAPIER LOOM TYPE LEONARDO T170 2. YEAR OF CONSTRUCTION 2001 3. WORKING WIDTH 1700mm 4. 8 COLORS 5. STAUBLI DOBBY 6. 20 LEVERS QUANTITY: 1 Learn More

TT-8307 CAMERON ELITE TD4400 SLITTER REWINDER, WIDTH 82” 1. CAMERON ELITE TD4400 SLITTER REWINDER 2. HANDLES UP TO 82” WIDTH AT SPEEDS OF 3000 FPM 3. WITH 60” MAX DIAMETER FOR UNWIND/REWIND 4. EQUIPPED WITH ALLEN BRADLEY CONTROL SYSTEM AND EUROTHERM DRIVES FOR VERSATILE PAPER AND BOARD PROCESSING 5. USED ELITE CAMERON MODEL TWO-DRUM REWINDER. QUANTITY: 1 Learn More

TT-8230 MASTER BAG 300X SQUARE BOTTOM PAPER BAG MACHINE, YEAR 2025 1. MASTER BAG 300X – SQUARE BOTTOM PAPER BAG MACHINE 2. YEAR: 2025 Learn More

TT-8072 SHM TWIN KNIFE MODEL 1400DK 55” DIGITAL SHEETER, YEAR 1998 TO 2018 1. SHM TWIN KNIFE MODEL 1400DK 55” DIGITAL SHEETER 2. YEAR 1998 TO 2018 3. UPGRADED 7/2018 BY SHEET TECH INC QUANTITY: 1 Learn More

TT-8070 GALILEO V316 METALLIZER, WIDTH 1650mm, YEAR 2000 1. MACHINE BRAND: GALILEO 2. MODEL: V316/P 3. YEAR: 2000 QUANTITY: 1 Learn More

TT-8036 MITSUBISH D-16, CUT OFF 546, YEAR 2001 1. MITSUBISH D-16, CUT OFF 546 2. YEAR 2001 3. MITSUBISHI INFEED INCLUDING WEB GUIDE & TENSION SENSING DEVICE 4. API CONTROL CONSOLE QUANTITY: 4 UNITS Learn More