Search results for: 'Piece'

REFERENCE NUMBER: M-2027 (77012LOK6UF) SOMET SM-93 WEAVING LOOMS YEAR 1992-1993 WIDTH 3400mm-3600mm SOMET SM-93 WEAVING LOOMS YEAR 1992-1993 QUANTITY AVAILABLE: 16 Learn More

REFERENCE NUMBER: G-6627 TEXTILE WASTE RECYCLING LINE QUANTITY AVAILABLE: 1 Learn More

INVENTORY NUMBER: E-9001 COMPUTERIZED DOWN AND FEATHER FILLING MACHINE DIMENSION: APPROX. 6400 x 2500 x 3000mm VOLTAGE: AS PER CUSTOMER'S NEEDS POWER: 6kw AIR PRESSURE: 0.5-0.8mpa QUANTITY AVAILABLE: 1 Learn More

INVENTORY NUMBER: E-4400 QUILTED FOAM WASTE REPROCESSING MACHINE THIS MACHINE IS SUITABLE FOR FOAM WASTE REPROCESSING OR FOAM RECYCLING QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-2253 PILLOW & CUSHION AUTOMATIC WEIGHING & FILLING LINE FOR SALE: (5 PILLOWS PER MINUTE) FIBER OPENING, ACCURATE WEIGHING BY WEIGH PAN WITH LOAD CELL AND HIGH SPEED FILLING SYSTEM TOUCH SCREEN PANEL, FULLY AUTOMATED AND ACCURATE HANDLES WEIGHTS OF PILLOWS: FROM 150g TO 1500g PRODUCTION RATE: 5 PIECES PER MIN, 2400 PIECES PER 8 HOURS METAL DETECTOR AND OVERLOAD ALARM INCLUDES FIBER OPENING MACHINE ONE PERSON CAN RUN WHOLE LINE TWO HEAD FILLING MACHINE WITH PATTING DEVICES OPTIONAL: VACUUM FILLING TABLE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-3236 QUILTED FOAM WASTE REPROCESSING MACHINE (NEW) THIS MACHINE IS SUITABLE FOR FOAM WASTE REPROCESSING OR FOAM RECYCLING. THE MACHINE'S CUTTING TOOLS ARE IMPORTED FROM GERMANY. THE MACHINE CAN CUT THE FOAM INTO REGULAR PIECES AND WITHOUT PRODUCING WASTE POWDER AND CAN ALSO CUT QUILTED FOAM FABRIC WASTE; FOR EXAMPLE MATTRESS TICKING WITH FIBERFILL AND NONWOVEN-BACKING. ORDINARILY QUILTED FABRIC WASTE CANNOT BE REUSED BUT WITH OUR QUILTED FABRIC WASTE AND FOAM CUTTING MACHINE, THE MANUFACTURER CAN RECLAIM THIS WASTE. BY CUTTING THE QUILTED FABRIC WASTE IT IS TRANSFORMED INTO LITTLE PIECES, AND IT CAN BE USED AS FILLING MATERIAL FOR PILLOWS, CUSHIONS, ETC. QUANTITY AVAILABLE: 1 Learn More

•ITEM NO.: F-2 •DIMENSION: APPROX. 11000*2500*3000MM •VOLTAGE: 380V 50HZ 3PHASE •POWER: 11KW •FILLING RANGE: 2-100 G, DEPENDING ON THE MATERIAL •ACCURACY: ±1G •AIR PRESSURE: 0.5-0.8MPA •THERE ARE 4 WEIGHING SYSTEM AND 2 WORKING TABLE ASSEMBLED TO THE DOWN FEATHER FILLING LINE •IT IS MAINLY USED TO MAKE DOWN FEATHER QUILTING Learn More

REFERENCE NUMBER: M-3568

SCHLAFHORST SE11 OPEN END WITH SUESSEN SCM1 SPIN CONVERTED FROM SE8

 

SCHLAFHORST SE11 OPEN END WITH SUESSEN SCM1 SPIN CONVERTED FROM SE8

NO OF ROTORS: 216

ROTOR TYPE: BELLCORO G330

FACE PLATE: 31U

OPENING ROLLER: B174

NAVEL: KSK6

TAKE UP: SRZ (CHEESE TYPE)

WAXING : AVAILABLE

PIECER: DOUBLE

INFORMATOR: AVAILABLE

SPIN BOX: SE 11, SUESSEN COROBOX

LASER TYPE: TWIN DISC

PIECER CARRIAGE: DIGITAL DK-2 CARDS ( FOR IMPROVED PIECING )

WITH LASER TYPE LIGHT BARRIER

TRASH BELT : MODIFIED TO 110 MM WITH SWEEP CAT TO CLEAN THE TRASH EFFICIENTLY AND FASTER

ROTOR SPEED UP TO 120.000 ( PRESENTLY RUNNING AT 120.000 )

WITH INVERTER

 

QUANTITY: 14

Learn More

REFERENCE NUMBER: M-3349 (88013DYN7U)-D TOYOTA AIRJET LOOMS TOYOTA AIR JET LOOM QTY MODEL=JA2S-190TP-T610 TOTAL 60 LOOMS 60 STAUBLI POSITIVE TAPPET CAM MOPTION TYPE 1620 CAM BOX WITH 7 SHAFT 6 CAMS WITH 1 SPACER FOR EACH LOOM 60SETS 1 REPEAT GEAR FOR EACH LOOM 60SETS PROFILE REED SYSTEM REED SPACE 190 CM 60 LOWER BUILT ONE PIECE BOX TYPE SIDE FRAME FOR HIGH SPEED OPERATION 60 OIL BATH LUBRICATION FOR MAIN UNITS 60 TWO SIDES CRANK DRIVE BEATING WITH OIL BATH 60 HIGH TORQE INDUCTION MOTOR WITH SOLENOID BRAKE (4P-3PHASE,3.5KW) 60 MAIN CONTROL COMPUTER WITH 32 BYTES CPU 60 DISTRIBUTED CONTROL SYSTEM BY OPTICAL FIBER COMMUNICATION NETWORK 60 TOUCH SCREEN FUNCTION PANEL WITH MULTI- WINDOW DISPLAY 60 AUTOMATIC INITIAL CONDITION - (ICS) SYSTEM 60 AUTOMATIC FAULT ALRAM FUNCTION 60 WEEKLY EFFICIENCY GRAPH DISPLAY & DOWN TIME 60 CAUSE DISLPAY BEAM CLOTH ESTIMATOR 60 2 COLOUR MIXING DEVICE BY ELECTRIC DRUM POLE (EDP) 60 TAPERED SUB NOZZLE 60 LOW AIR PRESURE & HIGH PROPULSIVE MAIN NOZZLE 60 DIRECT DRIVE SOLENOID VALVE FOR MAIN & SUB NOZZLE 60 TWO INDEPENDENT SUB NOZZLE TANKS 60 TAPERED TUNNEL REED 60 AUTOMATIC TIMING CONTROLLER (ATC) 60 AUTOMATIC BRAKE SYSTEM (ABS) 60 TIMING CHEKER WITH GRAPH DISPLAY ON FUNCTION PANEL 60 CENTRALIZED REGULATOR 60 ELECTRONIC LET OFF MOTION BY DIGITAL AC SERVO MOTOR 60 AUTOMATIC LET OFF ADJUSTMENT 60 FELL FORWARD DEVICE FOR STOP MARK PREVENTION 60 POSITIVE EASING MOTION WITH TWIN BACK ROLLER 60 MECHANICAL TAKE UP MOTION BY CHANGE GEAR 60 ON LOOM TAKE UP MOTION FOR MAXIMUM -600MM CLOTH DIA 60 DOUBLE PRESS CLOTH ROLLS 60LOOM METAL SPRAYED SURFACE TAKE UP ROOLER 60 RING TAMPLE-3ROWS -24RING 60SET ROTARY LENO SELVEDGE AT L+R SIDE WITH ELECTRIC STOP MOTION 60SET DOUBLE FEELER FOR WEFT STOP MOTION -(REFLECTING TYPE ) 60 ELECTRIC WARP STOP MOTION BY SIX LINES CONTACT BAR 6 PER LOOM YARN BEAM SET WITH 1000 MM FLANGE & 178 MM BAREL DIA 90 CLOTH ROLLER 100 MM DIA 90 REED 60PIECE HEALD FRAMES 7 PER LOOM HEALD WIRE (331MML) C TYPE 6000PER LOOM DROPPER- (165-11-0.3) 6000PER LOOM QUANTITY: 60 TOYOTA AIR JET LOOM QTY MODEL=JA2S-280TP-T610 TOTAL 12 LOOM. 12 STAUBLI POSITIVE TAPPET CAM MOPTION 12SETS TYPE 1620 CAM BOX WITH 7 SHAFT 6 CAMS WITH 1 SPACER FOR EACH LOOM 12SETS 1 REPEAT GEAR FOR EACH LOOM 12SETS PROFILE REED SYSTEM REED SPACE 280 CM 12 LOWER BUILT ONE PIECE BOX TYPE SIDE FRAME FOR HIGH SPEED OPERATION 12 OIL BATH LUBRICATION FOR MAIN UNIT 12 TWO SIDES CRANK DRIVE BEATING WITH OIL BATH 12 HIGH TORQE INDUCTION MOTOR WITH SOLENOID 12 BRAKE (4P-3PHASE,3.5KW) MAIN CONTROL COMPUTER WITH 32 BYTES CPU 12 DISTRIBUTED CONTROL SYSTEM BY OPTICAL FIBER 12 COMMUNICATION NETWORK TOUCH SCREEN FUNCTION PANEL WITH MULTI- WINDOW DISPLAY 12 AUTOMATIC INITIAL CONDITION - (ICS) SYSTEM AUTOMATIC FAULT ALRAM FUNCTION 12 WEEKLY EFFICIENCY GRAPH DISPLAY & DOWN TIME 12 CAUSE DISLPAY BEAM CLOTH ESTIMATOR 12 2 COLOUR MIXING DEVICE BY ELECTRIC DRUM POLE (EDP) 12 TAPERED SUB NOZZLE 12 LOW AIR PRESURE & HIGH PROPULSIVE MAIN NOZZLE 12 DIRECT DRIVE SOLENIOD VALVE FOR MAIN & SUB NOZZLE 12 TWO INDEPENDENT SUB NOZZLE TANKS 12 TAPERED TUNNEL REED 12 AUTOMATIC TIMING CONTROL (ATC) 12 AUTOMATIC BRAKE SYSTEM (ABS) 12 TIMING CHEKER WITH GRAPH DISPLAY ON FUNCTION PANEL 12 CENTRALIZED REGULATOR 12 ELECTRONIC LET OFF MOTION BY DIGITAL AC SERVO MOTOR 12 AUTOMATIC LET OFF ADJUSTMENT 12 FELL FORWARD DEVICE FOR STOP MARK PREVENTION 12 POSITIVE EASING MOTION WITH TWIN BACK ROLLER 12 MECHANICAL TAKE UP MOTION BY CHANGE GEAR 12 ON LOOM TAKE UP MOTION FOR MAXIMUM -600MMCLOTH DIA 12 DOUBLE PRESS CLOTH ROLLS 12LOOM METAL SPRAYED SURFASE TAKE UP ROOLER 12 RING TAMPLE-3ROW -30RING 12SET OCCUPIED WITH TUCK IN DEVICE WITH COMPLETE ACCESSORIES DOUBLE FEELER FOR WEFT STOP MOTION -(REFLECTING TYPE ) ELECTRIC WARP STOP MOTION BY SIX LINES CONTACT BAR 6PER LOOM YARN BEAM SET WITH 1000 MM FLANGE & 178 MM BARREL DIA 18 CLOTH ROLLER 100 MM DIA 18 REED 12PIECE HEALD FRAMES 7 PER LOOM HEALD WIRE (331MML) C TYPE 8000PER LOOM DROPPER- (165-11-0.3) 8000PER LOOM QUANTITY AVAILABLE: 12 LOOMS 20 LOOMS HAVE GEAR FOR TUCK IN DEVICE, GEAR BOX AT LEFT SIDE 1 INVERTER FOR 36 LOOMS ( 2 INVERTERS FOR ALL 72) 2 ATLAS COPCO ZR-315 COMPRESORS AND DRYER MD-1000 AVAILALE AT ADDITIONAL COST Learn More

REFERENCE NUMBER: A-1119 COMPLETE OPEN END PLANT WITH 1.200 ROTORS YEAR FROM 1990 TO 2005 BLOWROOM CARDS DRAWFRAMES OPEN END QUANTITY AVAILABLE: 1 Learn More